USA flag logo/image

An Official Website of the United States Government

Company Information:

Company Name: Cim Systems, Inc.
City: Richardson
State: TX
Zip+4: 75080
Woman-Owned: No
Minority-Owned: No
HUBZone-Owned: No
Website URL: N/A
Phone: N/A

Award Totals:

Program/Phase Award Amount ($) Number of Awards
SBIR Phase I $444,907.00 9
SBIR Phase II $1,185,923.00 3

Award List:

EXPERTISE

Award Year / Program / Phase: 1986 / SBIR / Phase I
Agency / Branch: DOD / NAVY
Principal Investigator: Ronald b ellis
Award Amount: $49,900.00
Abstract:
It is proposed that an automated learning system can be developed to trap the knowledge of an experienced manufacturing planner and incorporate it into an expert system. the learning system would work in the environment of an experienced planned using an existing automated planning system (aps) to… More

OPTIMUM CONCURRENT FLOW ROUTING IN A DYNAMIC NETWORK

Award Year / Program / Phase: 1986 / SBIR / Phase I
Agency / Branch: DOD / NAVY
Principal Investigator: Ronald B Ellis
Award Amount: $46,000.00

OPTIMUM CONCURRENT FLOW ROUTING IN A DYNAMIC NETWORK

Award Year / Program / Phase: 1987 / SBIR / Phase II
Agency / Branch: DOD / NAVY
Principal Investigator: Ronald B Ellis
Award Amount: $500,000.00
Abstract:
The emergence of artifical intelligence and expert systems technology from the laboratory environment into general practice offers a promising approach for the development of manufacturing applications. manufacturing systems built with this technology will be particularly valuable for second and… More

INTELLIGENT KNOWLEDGE-BASED CAD FOR PRODUCIBILITY

Award Year / Program / Phase: 1987 / SBIR / Phase I
Agency / Branch: DOD / ARMY
Principal Investigator: Dr Pom Piumsomboom
Award Amount: $49,900.00

DESIGN PRODUCIBILITY ASSESSMENT SYSTEM

Award Year / Program / Phase: 1988 / SBIR / Phase I
Agency / Branch: DOD / USAF
Principal Investigator: M flower/dr j priest
Award Amount: $49,928.00
Abstract:
Current design producibility engineering relies on the use of checklists and the experience of the designer and the manufacturing engineer to integrate manufacturing requirements into the overall design of an item. apart from the use of very generalized checklists, there exists no established set of… More

DESIGN FOR PRODUCIBILITY TOOLS FOR ELECTRONIC SYSTEMS

Award Year / Program / Phase: 1988 / SBIR / Phase I
Agency / Branch: DOD / USAF
Principal Investigator: J Holt/dr J Priest
Award Amount: $49,928.00

INTELLIGENT KNOWLEDGE-BASED CAD FOR PRODUCIBILITY

Award Year / Program / Phase: 1989 / SBIR / Phase II
Agency / Branch: DOD / ARMY
Principal Investigator: Dr Pom Piumsomboom
Award Amount: $525,923.00
Abstract:
Innovative research is needed to address the problem of designing for producibility. knowledge based systems now offer considerable promise in this field. if the ground data for the inferences of such a system can be captured directly from a design drawing then analysis can be conducted with the aid… More

DESIGN FOR PRODUCIBILITY TOOLS FOR ELECTRONIC SYSTEMS

Award Year / Program / Phase: 1989 / SBIR / Phase II
Agency / Branch: DOD / USAF
Principal Investigator: J Holt/dr J Priest
Award Amount: $160,000.00
Abstract:
This project is to develop a set of design-for-producibility (dfp) tools and guidelines for electronic systems. the guidelines will cover all levels of electronic system interconnection: base materials, bare boards, board assemblies, connectors, wire and cable harnesses, racks, chassis, cabinets,… More

EXPERT SYSTEM FOR CIRCUIT BOARD ASSEMBLY

Award Year / Program / Phase: 1989 / SBIR / Phase I
Agency / Branch: DOD / NAVY
Principal Investigator: Mike Flower/dr J Priest
Award Amount: $49,975.00
Abstract:
The proposed expert system for circuit board assembly is an engineering software tool whose goal is to help an organization to optimize the placement and insertion sequence of electronic part components for a circuit card assembly using kitted parts. it assumes that the assembly process is not a… More

DESIGN COMPLIANCE ASSESSMENT TOOL (DCAT) FOR ELECTRONIC SYSTEMS

Award Year / Program / Phase: 1989 / SBIR / Phase I
Agency / Branch: DOD / USAF
Principal Investigator: Steve Hickman
Award Amount: $49,996.00
Abstract:
Moving from prototype to production design is not always a smooth transition. interactions between parts can surface that were previously unnoticeable but are now worrisome or even fatal to the goal of the design. in order to eliminate this costly scenario, designers need a tool that will expose… More

CONCURRENT ENGINEERING

Award Year / Program / Phase: 1991 / SBIR / Phase I
Agency / Branch: DOD / USAF
Principal Investigator: Mike Flower , Principal Investigator
Award Amount: $49,482.00
Abstract:
A concurrent engineering methodology for the design of electronic products, processes and the product life-cycle, is needed. concurrent engineering is the simultaneous, interactive, cross disciplinary involvement of design, manufacturing and field support engineering that assures design performance,… More

INTEGRATION OF EXPERT SYSTEM FOR PROCESS PLANNING AND FEATURE BASED DESIGNS

Award Year / Program / Phase: 1992 / SBIR / Phase I
Agency / Branch: DOD / DARPA
Principal Investigator: Pruchya Piumsomboon
Award Amount: $49,798.00
Abstract:
Artificial intelligence/expert system techniques have demonstrated the ability to address complex reasoning tasks required for process planning. feature-based design theory and preliminary efforts have shown the potential of providing a fundamental model for capture and manipulation of design… More