Abstract:ABSTRACT: Emergence and feasibility for flexible body-worn electronics and particularly medical patches requires high performance electronics capability. The problem is that these new technologies must have flexible and conformal physical formats and conventional electronic components are not in… more
Abstract:Today"s Navy continues to see increased demand for more power both on and off the ship. This need is largely driven by the continued development of high power density advanced weapons systems and sensors. Continued space and weight limitations for these ship applications will drive the need for… more
Abstract:This Subsequent Phase II Proposal is an extension of Phase II contract N00014-11-C-0420. The overall objective of the proposed Subsequent Phase II effort is to develop and provide initial validation for a mobile training platform and framework that will support optimized refresher training for a… more
Abstract:ABSTRACT: Test validation of munition performance, particularly in the endgame environment, requires that enormous quantities of video and other sensor data be collected in proximity to the munition impact or detonation location, and transmitted in some manner back to the ground receiving station,… more
Abstract:Atom interferometer inertial sensors can provide game changing performance improvements in inertial accuracy for tactical inertially-guided weapons without the need for GPS aiding. This technology is the most viable option for manufacture of IMUs of strategic-grade accuracy in a tactical… more
Abstract:We propose development of a high performance, portable atomic clock using cold atom technology. The clock will have short term stability of better than 10^-12 at one second and of 5x10^-15 at timescales of one day. The size, weight, and power (SWaP) of
Abstract:We propose to build and test a prototype IMU based on atomic interferometry. This includes the laser source, vacuum system, simplified low-power electronics, and software. Initial testing of noise level, bias drifts, and performance under dynamics will be done on a per-axis basis, transitioning to… more
Abstract:Apecor will develop an advanced portable power manager for rapid field recharging of military rechargeable batteries from foldable photovoltaic (PV) panels as well as scavenged energy from any available power source. This power manager will be to directly support the soldier by reducing the… more
Abstract:A programmable universal pulsed power source capable of delivering voltages up to 50 kV, current up to 1 kA, pulse durations of 100"s of ns and repetition rates of 10"s of kHz is proposed to meet near term high powered RF research and development efforts. The concept is proposed to reduce… more
Abstract:Applied Radar proposes to develop a high-gain low cost, size, power and weight (low-CSWAP) tactical common data link (TCDL) antenna for the Firescout and Predator UAVs. The improved TCDL antenna will support 6 or more nodes of high-gain full-duplex communication at 21.42 MBPS in a star network… more
Abstract:The Associative Model of Data offers a fundamentally different meta-model for data organization than the well-established relational data model. The associative model focuses on Items and Links among items rather than sets of records. We propose to compare and contrast the associative model with two… more
Abstract:Although great strides have been made in the development of simulators for training technical and teamwork skills, much less progress has been made with regard to skill assessment. Typically, performance is measured using a rating scale with anchors ranging from"low"to"high."Such… more
Abstract:Efficient and accurate indexing is fundamental to the Big Data enterprise, but traditional indexing techniques are often foiled by noise and missing information. Aptima proposes Phase II of CERTAIN (Certainty Enrichment via Relational and Temporal Analyti
Abstract:Aqwest LLC proposes to develop a phase change material (PCM)-based thermal energy storage (TES) to enable"rightsizing"of environmental control units (ECU) and improve overall efficiency through reduced peak loads, more stabilized ECU operation, and off-peak thermal energy storage. The… more
Abstract:Laser designation and marking is critical in today's high precision combat environment. Performance is limited by how well the soldier can hold the laser beam onto the target. Current fielded laser designator systems minimize beam pointing error by employing a heavy'stabilized'mount… more
Abstract:Dual mode seekers can increase lethality, particularly in GPS denied environments or in situations where precision targeting is required, for example in areas where collateral damage must be minimized. The objective of this proposal is to provide a dual mode sensor that provides the greatest utility… more
Abstract:Arete Associates proposes an end-to-end solution to the challenge of at-sea launch and recovery of manned and unmanned vessels that incorporates the future state of the vessel into a robust crane control loop. By fielding an ocean penetrating, eye-safe LIDAR system on the recovery ship, the state of… more
Abstract:Arete Associates proposes a Phase I effort to develop a radar mode that leverages a long coherent integration times to improve the detection of small boat targets in maritime environments up to sea state 4. The overall objective of this SBIR project is to then integrate these techniques and… more
Abstract:Arete Associates has developed a compact lightweight lidar system for precision bathymetry and topography suitable for operation from a small tactical unmanned aerial vehicle. The subject of this Phase 2 SBIR is to adapt this existing system to perform submarine detection, classification, and… more
Abstract:Arete Associates will develop and deliver autonomous image processing algorithms that execute in real-time onboard unmanned underwater vehicle (UUV) neutralizers. The real-time image enhancement algorithms mitigate backscatter, surface effects, and platform video motion using single frame and… more
Abstract:ABSTRACT: A phase II program is proposed leading to integrate wireless inductive power transfer technology on two prototype tactical vests. The focus of the phase II program would be the development and evaluation of a full-scale inductive power transfer system on a PRC-152 radio by both modifying… more
Abstract:ASR proposes to develop an HPM source for deployment into the MLRS M26 (or smaller) payload bay. Multiple, parallel FEGs will charge a single quarter wave oscillator to 100kV or more, and each FEG will be fired in order to accomplish the desired pulse repetition rates (PRR) in excess of 100 Hz. … more
Abstract:This effort will develop innovative methods and an enhanced diagnostic tool to optimize maintenance for the Trident II (D5) Weapon System Inertial Navigation Systems (INS) by determining the most effective maintenance path considering history, likelihood of success for corrective actions, and time… more
Abstract:ABSTRACT: A chip carrier for high power density electronics made from low CTE materials and embedded with an oscillating heat pipe will be applied to a real world satellite electronics device to transform high heat flux (e.g. 100-300W/cm2) at the device package to a lower heat flux at the heat sink… more
Abstract:ATA Engineering proposes to simulate complex interior and exterior flowfields of hot, supersonic aircraft engine nozzles by applying a novel dynamic hybrid RANS/LES (DHRL) modeling framework coupled to the Loci/CHEM (CHEM) finite-volume flow solver. DHRL is code- and turbulence model-independent. It… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.