Abstract:75521S Radio frequency (RF) cavities are a key component in particle accelerators for fundamental high-energy physics research and medical applications. To enhance their capabilities, niobium-coated superconducting copper cavities have shown promise for supporting higher electric field gradients… more
Abstract:Alameda Applied Sciences Corporation (AASC) proposes to replace the current return rods in the anode of the plasma radiation source (PRS) load, with an annular, supersonic gas jet: an innovation that could drastically reduce source region debris along the line-of-sight (LOS) of the test object, in a… more
Abstract:78840S05 Superconducting radio frequency (RF) accelerator cavities are traditionally constructed from pure Niobium metal. However, niobium is expensive and difficult to manufacture, leading to increased material and fabrication costs. Compounding the cost problem is the fact that the majority of… more
Abstract:This effort is based on the outcome of a successful Phase I project that demonstrated the feasibility of generating logic pattern-based, OS-platform-independent, signatures for malicious program logic and detecting its presence within much larger binary modules. The detection (and localization) of a… more
Abstract:2LR proposes to develop a malicious source code scanner that can flag sections of potentially `bad' source code that is vulnerable to exploitation or may contain latent malicious content. This effort will evaluate and compare current methods for detecting malicious code with a novel method based on… more
Abstract:This SBIR effort proposes to develop tools that enable a capability in tamper proof source code. The proposed methods will protect against several modes of attack including malicious programmers, source code viruses, and system worms. The tools and techniques proposed are based on the fundamental… more
Abstract:Leishmaniasis has significant impact on military and civilian populations throughout the Asia-Africa region, including Afghanistan and Iraq. There are currrentlly no proper field-deployable diagnostic tools for the key form, cutaneous leishmaniasis. Development of an assay which detects cutaneous… more
Abstract:Acellent Technologies, Inc. proposes to develop a complete Structural Health Monitoring (SHM) system for application to unmanned air vehicle (UAV) platform. In partnership with The Boeing Company, the development will focus primarily on the monitoring of UAV used by the U.S. Air Force such as Sensor… more
Abstract:Acellent Technologies proposes to develop a smart joint structural health monitoring (SHM) sensor network that can autonomously assess in real time the structural stability of structures such as buildings. The sensor network will use a combination of large and small piezoelectric actuators and… more
Abstract:Structural Health Monitoring (SHM) is increasingly being evaluated by the industry as a possible method to improve the safety and reliability of structures and thereby reduce operational cost. However, the scalability and applicability of SHM systems for the monitoring of large structures is still a… more
Abstract:Composite rocket motor cases are subject to a variety of external environmental and loading conditions from the time-of-manufacturing till usage. These conditions can significantly impact the performance and behavior characteristics of the composite motorcase structure. Fueling of the rocket motor… more
Abstract:Acellent Technologies proposes to develop a self-powered structural health monitoring system for use in monitoring of mission critical structures such as missiles or combat vehicles in the field. The proposed system will be completely autonomous having the capabilities for (1) Energy harvesting for… more
Abstract:Monitoring the continued health of aircraft subsystems and identifying problems before they affect airworthiness has been a long-term goal of both the U.S. military and commercial aviation industry. Structural health monitoring (SHM) can provide a paradigm shift from schedule-driven maintenance to… more
Abstract:Acellent Technologies, Inc. proposes to develop a SMART TAPE system that can be used to perform rapid non-destructive evaluation in real time and provide long-term monitoring of pressure vessels in liquid rocket engines. Based on Acellent's existing SMART Layer technology, this innovative system… more
Abstract:3D Research Corporation and Aerojet, Incorporated, propose a novel approach to munitions modeling to assure the munitions meets Insensitive Munitions (IM) requirements of DoDD 5000.2-R and MIL-STD-2105C. IM validation of munitions requires extensive testing, and it is necessary to develop… more
Abstract:3D Research Corporation and the University of Alabama in Huntsville have teamed to offer advanced high-energy gel propellants for exoatmospheric interceptors. High energy gelled propellants are required to improve the performance envelopes of future MDA missile interceptors. We will theoretically… more
Abstract:The future generation of both military and commercial diesel engines will operate at significantly higher temperatures and pressures than today's engines. The future combat system diesel engine operating parameters demand significant design improvement of in cylinder insulation. Increased cylinder… more
Abstract:A high-power density, low specific heat rejection diesel engine design for traditional and hybrid future combat system (FCS) vehicle configurations is being proposed. The total propulsion system of the vehicle hybrid configuration will fit the future vehicle assigned space/volume by TACOM's vehicle… more
Abstract:DESCRIPTION (provided by applicant)
The primary aim is to facilitate the development and delivery of live, interactive HAZWOPER training through the use of internet-based Advanced Training Technologies (ATT). To this end, ATL has designed the ATL Web-based Training Center as a fully integrated… more
Abstract:Advanced Device Technology, Inc.(ADT) and the University of Iowa, Optical Science and Technology Center are pleased to respond to SBIR solicitation NO5-032 entitled " 1024 x 1024 Snapshot Two-Color Infrared Focal Plane Array for Air-to-Ground Applications". We propose to develop large format… more
Abstract:Advanced Materials Corporation proposes to optimize the process to manufacture soft magnetic materials that are anticipated to be superior to M19 steels both in magnetic induction and in electrical resistivity. Proof-of-concept studies conducted during Phase I have demonstrated the superior magnetic… more
Abstract:The proposed effort is concerned with the development of a novel optimization scheme and computer software for the effective design of advanced aerospace vehicles. Since such vehicles are characterized by unprecedented levels of areo-structural-controls-propulsion interactions, a multidisciplinary… more
Abstract:DESCRIPTION (provided by applicant): A new protein fusion expression system was conceptualized and is being developed to provide tag-free recombinant protein purification via one-step chromatography. Phase I of this project includes optimization of the activity of the key component in the fusion… more
Abstract:The objective of this project is to develop a test-validated CAD tool for performing virtual laser shock peening(LSP) simulations of rotorcraft components. Virtual LSP peening can be used, in conjunction with virtual fatigue testing, to conduct simulations to assess the effects of variations in… more
Abstract:This proposal proposes development of PURSUIT, a cross-domain intrusion detection and prevention system that relies upon state-of-the-art privacy-preserving distributed data mining (PPDM) technology. PURSUIT has a distributed multi-agent architecture that supports formation of adhoc collaborative… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.