Abstract:ABSTRACT: Emergence and feasibility for flexible body-worn electronics and particularly medical patches requires high performance electronics capability. The problem is that these new technologies must have flexible and conformal physical formats and conventional electronic components are not in… more
Abstract:Advanced Ceramic Fibers, LLC has developed a transformational enabling fiber technology for use in UHT turbine engines - alpha silicon carbide/carbon based fibers - with capability above Navy"s goal of 2700 F. Our turbine engine OEM and aerospace team members are excited about the MC/C fibers… more
Abstract:Reliable, readily-manufacturable technologies are needed to create the next generation of high-density, high-functionality 3D integrated circuits (ICs) for integrating silicon pixel detectors with CMOS read-out ICs. Current methods for 3D IC development are severely limited by the thickness of the… more
Abstract:ABSTRACT: The objective of this work is to demonstrate a prototype of an innovative method to protect military space microelectronics from unauthorized tampering. The method will employ the joint cooperation of multiple countermeasures that operate at several levels of system abstraction. The… more
Abstract:The overall goal of this Phase I project is to show the feasibility of using state-of-the-art parameterization tools for shape changes (i.e., volumetric deformation/morphing provided by Sculptor) coupled with a fast FEA tool (i.e., the MAX method) to quickly calculate the dynamic response of the… more
Abstract:Under this STTR, Sentient Corporation, along with the Ohio State University GearLab as a research partner, will develop a probabilistic physics-based damage modeling tool for the simulation of superfinished gear components. This model will consider critical surface, material, and load parameters for… more
Abstract:The Innovation of this Phase II project is developing physics-based analytical models to analyze gearbox components for safety, longevity, reliability and cost by predicting (1) New component performance, and optimal time-to-remanufacture, (2) Qualification of used components for remanufacturing… more
Abstract:ABSTRACT: The chalcogenide based ion-conducting memristor has been shown to be an effective element as the core of a simple neuromorphic computing circuit. The response of the computing circuit is the result of weighted external stimuli, the current state of the device, and the history of exposure… more
Abstract:In the United States today, the health consequences associated with childhood and adolescent obesity are projected to produce the first decline in life expectancy since the Great Depression. Addressing childhood obesity requires addressing nutritional needs, including dietary fat to support physical… more
Abstract:This Small Business Innovation Research Phase 1 project addresses the failure of osseointegration, the lack of bonding between an orthopedic device and bone. Failure of the implant does occur with an unacceptably high rate (8-20%). The main driver for revision surgery is aseptic loosening of the… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project is a mobile device healthcare simulation design that engages students in an active learning, pre-class activity. Pre-class assignments are documented to improve student learning but traditional reading meets with poor student compliance.… more
Abstract:The proposed 45 nm radiation hardened platform based structured ASIC architecture offers the performance and density expected of a custom ASIC with the low manufacturing cost associated with a structured ASIC. The low cost, high performance customization of the structured ASIC portion of the chip is… more
Abstract:ABSTRACT: American Semiconductor will develop and demonstrate structural integration of a conformal load bearing antenna structure (CLAS). Future aircraft will incorporate distributed electronics, sensors, and flight control transducers directly into the composite airframe. For near-term Air… more
Abstract:ABSTRACT: This project will investigate the feasibility of an integrated multilevel system for protecting space assets from system hardware and firmware exploitation. The overall strategy is to provide greater collective system protection as a whole than would otherwise be available from the sum of… more
Abstract:Advanced reconfigurable/reprogrammable communication systems will require use of commercial sub 100 nm electronics. Legacy radiation tolerant circuits fail to provide Single Event Upset (SEU) immunity at speeds greater than 500 MHz. New base level logic circuits have been demonstrated in Phase I… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project will stimulate the acceptance of carbon capture by companies that own and operate coal-fired plants. The Department of Energy considers the amine absorption of carbon dioxide (CO2) from flue gas of coal-fired power plants as the most… more
Abstract:Under this effort, Sentient will develop mixed-EHL models to predict the performance of fluid film bearings for submarine applications. The models will consider critical design and operational parameters such as component geometry and surface finish, start up and shut down speeds/loads, and… more
Abstract:This Small Business Innovation Research Phase I project shall develop analytical fatigue models as applied to the performance analysis of remanufactured gearbox coponents under NSF SBIR Phase I Solicitation 11-577 (Topic NM?Nanotechnology, Advanced Materials, and Manufacturing, Subtopic M3-Modeling… more
Abstract:The overall goal of this project is to develop an optimized surface texture process in order to maximize the efficiency of rolling/sliding contacts such as gears. Development of this high efficiency, rolling/sliding surface will be guided by Sentient's unique combination of modeling… more
Abstract:Gearbox seal wear and leakage is a major source of maintenance and downtime for rotorcraft. Sentient will use our advanced tribology modeling technology to evaluate coatings and surface texturing processes for carbon face seals and provide a generalized modeling approach that can replace physical… more
Abstract:Sentient will be developing a Smart DigitalClone Sensor for application to rotorcraft drivetrains and other rotating components on high value systems. This technology is enabled by our DigitalClone Ground Truth model, developed through Navy and Army SBIR funding and validated with multiple OEM… more
Abstract:Current gearbox life estimation techniques commonly underplay the significance of gear tooth surface fatigue due to the complexity of the phenomenon involved. The Phase I program successfully demonstrated the feasibility of utilizing advanced modeling techniques to predict the onset and propagation… more
Abstract:Researchers who develop high water use efficiency plants are in great need of precisely monitoring the uptake of water by their prototype plants at various segments of its root zone. They need to know how each plant variation utilizes water in producing food and from where the water is drawn.… more
Abstract:DESCRIPTION (provided by applicant): This proposed SBIR Phase II renewal will leverage the technical expertise of academic collaborators at Georgia Institute of Technology and ongoing relationships forged with behavioral health professionals to introduce key technical innovations to our existing… more
Abstract:The general problem: In the United States today, the health consequences associated with childhood and adolescent obesity are projected to produce the first decline in life expectancy since the Great Depression. More than 23 million children and adolescents are overweight or obese. The role of fat… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.