Abstract:The technical objective of this proposal is to demonstrate a Quantum Cascade Laser (QCL) emitting in the 3.0-3.5 & #181;m wavelength region, which employs a metamorphic buffer layer (MBL). It is the goal of this program to develop a QCL single-stripe device which will operate in a single,… more
Abstract:Conventional generation of a high-quality RF carrier (signal) beyond 50GHz requires high precision cavity engineering that inherently restricts contiguous bandwidth coverage. Worse, even if one were capable of fabricating a set of such stabilized, frequency-dense cavities to mimic discrete 30-120GHz… more
Abstract:C-CAT continues to successfully make complex large scale assemblies for hypersonic aerospace vehicles based on decades of Carbon-Carbon (C-C) fabrication experience. Current and future vehicle designs continually push the limits of C-C material capabiliti
Abstract:No currently available burn product has shown efficacy in substantially decreasing wound healing time and preventing scar formation. The goals of this Phase II proposal are to expand on the results obtained in the Phase I study that showed that (1) halofuginone inhibited collagen-mediated… more
Abstract:US production of Helium, a critical and irreplaceable resource that is currently produced from a few helium-rich natural gas reservoirs, is in rapid decline as these currently viable rich reserves are being depleted. The new technology being developed herein is required to recover helium from vast… more
Abstract:Nuclear power plant construction and life cycle management requires low cost, 3D information to achieve future construction cost goals. TetraVue is developing a high speed, high resolution 3D video camera that can create engineering models automatically, working like any hand- or shoulder-operated… more
Abstract:ABSTRACT: This Small Business Innovation Research Phase II project seeks to further develop an AR coating on high efficiency PV device surface that can enable a reflection loss<3% over the wavelength range from 300 nm to 1800 nm. The proposed effort will optimize the coating design and the… more
Abstract:NAVAIR SBIR Topic N101-041, Development of High Temperature Survivability Coating Materials with Innovative Application Processes, was initiated to address performance shortfalls in coating systems operating in moderate-high temperature environments. The objective was to develop high temperature… more
Abstract:Ballistic and blast protection of both the crew and vital equipment onboard U.S. Navy surface ships and carriers is a critical component in the design of topside structures on these vessels. Materials such as glass, Plexiglas and polyurea are being considered and implemented for protection in these… more
Abstract:The DoD requires an increase in performance and density of solid propellants for use on boost, strategic and tactical missile systems. Attaining ingredients with higher energy and density while simultaneously maintaining satisfactory physical properties is extremely challenging. Current low-cost… more
Abstract:In this Phase II SBIR project, Mirrorcle Technologies Inc. ("MTI") plans to build on the successes of the Phase I effort to develop a MEMS-mirror based Q-switch technology to address one important item in the U.S. Army need for better and less costly laser range-finders. Additional… more
Abstract:Expansion of the Advanced Breakwater And Causeway Ultramarine System (ABACUS) research and development work accomplished under the Phase II Basic and Options 1 & 2 programs to full scale prototype systems and large scale demonstration models for both Seabasing and ship-to-shore logistics support… more
Abstract:The QED team proposes to study an active motion compensation platform supported by a self-contained air cushion system. The Phase II study will evaluate the ability of the'Ramp Motion Control Platform'(RMCP) to support and control the LMSR stern ramp through a range of elevated sea state… more
Abstract:The Persistent Anchorless Active Sonar Craft (PAASC) system is a unique approach to Naval ASW that achieves 90-day mission endurance carrying a state-of-the-art active sonar (DWADS) in a deep water operating area. The PAASC achieves this unparalleled endurance via an efficient balance between wave-… more
Abstract:ABSTRACT: The objective of the overall SBIR program is to develop a high performance mid-format (512 x 512, with 30 micron pitch) broad-band mid-wave (MW, 5 micron cut-off wavelength at 200K) infrared (IR) focal plane arrays (FPAs) using InAs/GaSb strained layer superlattices (SLS). SKINfrared LLC… more
Abstract:The effectiveness of synchrotron radiation science is being hindered by the limited availability of advanced detectors. This is due to the limited deployment of existing detectors as well as limited development effort to provide new advanced capabilities. As synchrotron radiation experiments become… more
Abstract:525 Solutions will manufacture highly economical and biodegradable uranium-from-seawater sorbents from fishing industry waste, and provide them to government-designated mining companies, at the same time leveraging the governmental funds to create a sustainable chitin products business, enabling… more
Abstract:A development program is proposed for a design automation software package that enables the generation of complex surfaces, with user defined or automated definition of point charge and hydrophobic/hydrophilic properties, using DNA origami as a presentation substrate. Building upon Parabon"s… more
Abstract:Superconducting radiofrequency accelerators require a critical component that connects the radiofrequency power supply (which is warm) to the accelerator cavity (which is very cold). This coupler component must be insulating on the outside to block heat from going into the cold region. It must also… more
Abstract:The operational need for this improved towed array technology insertion initiative stems from the necessity to improve availability and reliability of towed arrays in use on submarines in both shallow and deep water environments, and represents a critical submarine capability enhancement. The… more
Abstract:Acellent Technologies is developing a system for the US Navy that incorporates innovative ways to detect and track corrosion, measure clamping force and bolt preload in bolted joints typical of aircraft structures. Many of the corrosion inspection methods currently employed in the field to inspect… more
Abstract:Current Structural Health Monitoring (SHM) systems can be used for composite damage monitoring. However, current systems lack the ability to accurately detect, locate and characterize damage for complex composite structures with local property variation. Acellent Technologies Inc. has therefore… more
Abstract:ABSTRACT: Airbreathing hypersonic weapon systems utilizing ramjet/scramjet and/or combined cycle engines will open the door to many new capabilities for the warfighter. Applications include systems ranging from small tactical hypersonic missiles, hypersonic intelligence, surveillance &… more
Abstract:ABSTRACT: Fires initiating in engine nacelles and dry bays are the most common causes of loss of aircraft. However, since the Montreal Protocol restricting the production of Halons, a replacement has not yet been accepted by the aircraft survivability community despite numerous testing programs.… more
Abstract:ABSTRACT: Abstract (No proprietary info): Thermal interface materials (TIMs) constitute an essential part of thermal management which is quickly becoming the limiting factor in high power, high functional density, and increasingly small-sized electronics for future U.S. Air Force (AF) platforms.… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.