Abstract:Particle detectors for nuclear physics and high energy physics experiments require high performance, high sensitivity digitizers for read-out electronics. Analog-to-digital converters (ADCs) are used in such applications but limit experimental results because of a restrictive combination of speed,… more
Abstract:A critical aspect in Particle Accelerator Instrumentation is the precise, real-time control of the high- energy particle beams used to create the conditions required for sub-atomic physics experiments. The accelerator instrumentation systems require digital control and feedback with extremely high… more
Abstract:ABSTRACT: Ridgetop Group, Inc. will design and develop a prototype of an electronic warfare (EW)"Expert Troubleshooting and Repair System"that has the following characteristics: (1) troubleshooting support that presents a prioritized list of methods; (2) a list of test-dependent action(s)… more
Abstract:ABSTRACT: Ridgetop will develop an innovative Robustness Assessment for Design (RAD) tool for aircraft electrical power systems (EPS) to meet system safety, reliability, maintainability, and energy optimization requirements in each design stage by calculating system-level robustness. The design… more
Abstract:ABSTRACT: In Phase II, Ridgetop Group will develop a high-performance radiation-hardened ADC suitable for use in satellite communication (SATCOM) systems where radiation exposure would otherwise degrade performance. This proposal responds to Air Force topic AF103-092, with the objective of… more
Abstract:Propeller-driven aircraft produce vibrations that have a deleterious and potentially harmful effect to people exposed to their operational environment for extended durations. The E-2C aircraft has a high vibration environment, long duration missions, and a seat that produces impingements… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project addresses the development of a multifunctional solid-state nanolaminate composite, which may function as a structural material while storing energy in the form of a rechargeable super-capacitor. A unique production process is used,… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project focuses on the development of a novel, environment-friendly adsorbent material with low life-cycle cost for the removal of Arsenic from the water stream. The proposed material solution is based on a novel nanoporous geopolymer composite… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project aims to develop a novel slurry injection device for applications in chemical mechanical planarization (CMP), a key technology for integrated circuit (IC) manufacturing. Different from the current slurry application method that applies… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project will deliver a mobile payment communications infrastructure, mobile device apps for utilizing that payment infrastructure, point-of-sale solutions for merchants that utilize the payment infrastructure, and will establish the framework… more
Abstract:The need to develop an alternative technology to those that dominate the snack food industry has become apparent over the last decade. Quality, nutrition, functionality, health considerations articulated by the consumers coupled to efficiency, low energy requirements, low asset base, small process… more
Abstract:The DataSoft Virtual Radio Frequency (RF) Environment (VRE) functional prototype provides a system for immersing a few representative Command, Control, Communications (C3) Systems-under-Test (SUT) in an emulated environment of virtual emitters and realistic environmental RF channel effects to stress… more
Abstract:DESCRIPTION (provided by applicant): This project will develop a dynamic quantitative phase-imaging interference 4D microscope system to enable creating phase image movies and quantifying motion of live cells and cellular processes in vitro using harmlesslight levels without the need for adding… more
Abstract:This proposal by Jansen's Aircraft Systems Controls, Inc. presents an innovative solution for Active Combustion Control.Relative to the state of the art, this concept has the ability to provide frequency modulation (greater than 1000[Hz]) in combination with high amplitude modulation (in excess… more
Abstract:In Phase-I of the project we constructed a unique ROIC design based on our Amplifier-Shared-Dual-Band CTIA (ASDBC) technology to address the problems experienced by the existing ROICs. In Phase-II, we will refine and complete the design, manufacture the ROIC, fabricate the FPA, and test the… more
Abstract:The objective of Phase II is to implement and demonstrate the Open source Dynamic terrain API for SAF systems (ODAS) approach proposed, defined, and prototyped in Phase I for interoperability and correlation between dynamic formats and classic static, pre-distributed terrain solutions used by OneSAF… more
Abstract:Thin film solar cells are one of the most promising and cost effective means of generating electricity from sunlight. However, their manufacture requires the use of precision film thickness process control sensors in order to produce high efficiency and economically viable cells. Current film… more
Abstract:There is a growing need for sensors to detect radiological materials either for nuclear inspection or in the event of a nuclear attack. Thus, these sensors should have the capability of rapidly measuring key isotopic contents and ratios of actinides as well as other elemental composition of various… more
Abstract:ABSTRACT: High power fiber lasers have made significant progress in last several years. Several kW of output power has been demonstrated, which enables a wide range of new applications from laser welding, laser cutting, and laser drilling to military defense. While high power fiber lasers have been… more
Abstract:High power fiber lasers have made significant progress in the last several years. Ten kW of diffraction-limited output power at 1 micron from one single mode fiber has been demonstrated. Department of Defense (DoD) needs 100s of kW for missile defense as well as for protection against rockets,… more
Abstract:The ion exchange membrane is the key component in redox flow batteries (RFBs) as it critically determines the RFB performance and its economic viability. The membrane should possess the following properties to ensure high energy efficiency and long cycle life of RFBs: high proton conductivity, low… more
Abstract:ABSTRACT: Current state-of-the-art, high voltage, pulsed power systems designed to drive high power microwave (HPM) sources utilize Marx generator designs. The high voltage insulation of these devices has been traditionally based on either high dielectric strength oil or sulfur hexafluoride (SF6).… more
Abstract:This program is expected to result in a combined, miniature Power/Microclimate cooling system for the soldier. The compact thermoelectric generator system will create significant power and have higher energy density than lithium technology batteries over extended missions. The highly integrated,… more
Abstract:Diversified Energy proposes an innovative gasification system for the conversion of military useful waste streams into valuable energy products. The gasifier utilizes a molten bath, allowing for the gasification of a wide range of hydrocarbon feedstocks (e.g., biomass, MSW, sewage sludge, etc.)… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.