Abstract:ABSTRACT: Identifying the presence of endangered and threatened species is crucial to complying with Environmental Protection Agency regulations. Each year military reservations spend large amounts of resources in time, materials, and manpower in identifying if endangered or threatened species are… more
Abstract:The Acoustically Synchronized Store Ejection/Release Technology (ASSERT) test process was developed by CRAFT Tech. This research has produced a capability to conduct small scale dynamic drop tests instrumented with stereo-photogrammetry to track store motion and synchronize this with unsteady… more
Abstract:As air vehicle speeds increase, air breathing engine and inlet technology follow through concurrent supersonic performance requirements. The recent ability to build smaller supersonic engines has established a void in small air vehicle inlet capability. A solution to decrease the overall footprint… more
Abstract:The overall goal of this STTR program is to develop an efficient, high-fidelity, CFD-based design tool for the simulation of ship-board flight testing of autonomous UAV systems. In the first phase of this program, an overall flight simulation framework that employs a modular approach to the flight… more
Abstract:ABSTRACT: Cavitation which leads to head falloff and feed system instabilities are a constant source of problems for the low net positive suction head (NPSH) pumps that are needed for advanced liquid rocket engines. Head falloff limits the pumps capability to deliver propellant at the required… more
Abstract:On today"s battlefields, vehicles are at risk of encountering improvised explosive devices (IEDs). Fortunately, not all of these result in complete vehicle loss. Following events at both ends of the severity spectrum, Battle Damage Assessment and Repair (BDAR) and event reconstruction efforts… more
Abstract:The work to be conducted under this proposed effort will include design, analysis, and manufacture of composite sabot/pusher assemblies for US Navy specified sub-caliber gun launched HVP flight configurations. The overall scope of work will be divided into a Base, Option 1, and Option 2 efforts… more
Abstract:In this Phase II SBIR project, Daniel H. Wagner Associates will develop a full-scale prototype Air Combat Identification (ACID) Module that will improve the accuracy of Track Management or Data Fusion systems when attempting to estimate the identity or classification of an Air target. The… more
Abstract:Creating information products to answer"Tell Me About"questions requires the ability to identify key pieces of information relevant to a complex set of information requirements. Complicating matters, these key pieces of information exist in multiple modalities scattered across data stores,… more
Abstract:Modern military and commercial aircraft include numerous RF systems and associated antennas serving a multitude of functions. The designed free-space performance of these antennas can be degraded by their installation on the airframe due to interactions with the platform, and the co-siting of so… more
Abstract:Modern military systems contain numerous avionics and electronic systems that must perform to very high standards in hostile environments in the presence of numerous potential sources of electromagnetic interference (EMI). On airborne platforms for example, there could be dozens of RF systems… more
Abstract:ABSTRACT: A key problem in the rapid and lower cost development of spacecraft is that the various devices that comprise the spacecraft bus do not typically provide a single standard interface and/or communications protocols. This forces a design-to-order paradigm in which a spacecraft bus is… more
Abstract:In Phase 2, Diffraction LTD, in collaboration with Optics 1, proposes to develop a variable magnification clip-on thermal imager (VM-COTI) that will be compatible with a variety of weapon and head mounted optical systems ranging from 1X night vision goggles (NVGs) to 5X ACOG scopes. The VM-COTI… more
Abstract:ABSTRACT: Environmental protection coatings are required to provide oxidation and hot corrosion protection to hot section turbine components. Unfortunately, the current generation of such coatings can degrade the fatigue resistance of the coated alloy. It is increasingly recognized that, due to… more
Abstract:ABSTRACT: Thermal barrier coatings (TBC) are currently employed to protect gas turbine engine components. Thermally exposed TBC systems have been observed to be affected by moisture. This spallation mechanism, Moisture Induced Delayed Spallation (MIDS), occurs at room temperature while the coatings… more
Abstract:The goal is to develop external mechanical filters to eliminate signals above 2 kHz from accelerometers. Dominca"s patented layered-media approach will be used to develop filters for high-shock accelerometers used in explosive and impact events. Layered-media theory has been applied… more
Abstract:ABSTRACT: Echo Ridge proposes to prototype and evaluate GNSS processing algorithms designed to provide high accuracy and spoofing robustness (information assurance (IA)) by exploiting diversity in radio navigation signals (frequency, location, bandwidth, format) using new signal processing… more
Abstract:EngeniusMicro and the Georgia Institute of Technology propose a passive wireless sensor platform for the monitoring of corrosion on aircraft and for stored aircraft components. Multiple volumes, chambers, and compartments within aircraft are susceptible to corrosion damage because they are exposed… more
Abstract:This effort investigates two specific technologies to detect and monitor structural damage from high-energy impacts and blasts. The two technologies include directional transducers and structural retrofitting concepts. The directional transducers localize impacts, and enable subsequent in situ… more
Abstract:Tanks and enclosures were named the top corrosion expense on Navy vessels, accounting for $204 M in annual direct costs. To control these costs, there is a need for an automated monitoring system to assess coating damage and cathodic protection (CP) system performance. During the Phase II program,… more
Abstract:The proposed project is to demonstrate a novel technique for producing GaN single-crystal boules that yield GaN wafers and substrates suitable for fabrication of GaN high-power devices. The two key attributes of the proposed novel GaN growth technique (a bulk crystal growth technique) are: a high… more
Abstract:Currently available hull thickness sensors use ultrasonics and provide coverage of a single point on the hull. The sensor must then be moved over the hull while the thickness readings are monitored to detect thin areas of hull plate. These systems generally contain array type sensors; however, they… more
Abstract:The future net-centric military provides enhanced battlefield awareness through wireless links between unmanned aerial vehicles, high-speed aircraft, rotary-winged platforms, and soldiers on the ground. To support this, platforms must accommodate a variety of antennas, not to mention traditional… more
Abstract:SATCOM On-The-Move (OTM) is one of the greatest operational and tactical advantages our troops have. The SATCOM terminals available pose a number of practical constraints resulting in less than universal usage. Traditional reflectors are high profile and difficult to integrate on aircraft and… more
Abstract:TUI proposes to complete the development of two novel technologies that will enable pico-satellites in LEO to efficiently close the link with standard issue handheld radios on the ground. The first technology is a dual-band software-defined radio (SDR) that will provide UHF SATCOM to soldiers on the… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.