Abstract:Advanced hybrid packaging for MWIR FPA devices has considerable challenges in terms of increasing pixel density. These processes are based on Indium bumping; however, the current approach to deposition has scaling and cost issues. EnerGaia has a technology based on acoustic electroless deposition… more
Abstract:Effective protection for data-at-rest in mobile devices cannot be achieved by merely adding encryption and integrity features. Current smartphones contain hundreds of vulnerabilities that allow malware to overcome an App's containment (e.g. sandbox) to access and exfiltrate sensitive data and… more
Abstract:Communications systems are hindered by inherent system limitations and also by physical attributes. For WCDMA systems three prominent issues are capacity, high latitude performance (for systems based on geosynchronous satellites), and Line Of Sight (LOS) performance. The MUOS system, based on… more
Abstract:Geost and the University of Arizona propose to develop a non-lethal weapon system based on dual-pulse femtosecond-nanosecond generation of dense plasma sparks in air at range. In this approach, the femtosecond laser pulse creates a dilute plasma filament, location of which is controlled through the… more
Abstract:W Scientific plans to build a deployable ultra wideband digitizer system based on a unique combination of a photonic front-end processor with a high speed time-interleaving electronic digitizer. The hybrid architecture allows the system to achieve a wide analog bandwidth with high sampling dynamic… more
Abstract:DESCRIPTION (provided by applicant): A pocket-sized device for personal exposure level assessment Abstract Detecting environmental toxicants is critical for better understanding of the relationship between chemical exposures and many diseases, and for more effective prevention of the related… more
Abstract:Matrix completion (MC) concerns the problem of recovering a low rank matrix from a given small fraction of its entries. It is a recurring problem in collaborative filtering, dimensionality reduction, and multi-class learning and has a long history in mathematics. While the general problem of finding… more
Abstract:DESCRIPTION (provided by applicant): This project will develop a dynamic quantitative phase-imaging interference 4D microscope system to enable creating phase image movies and quantifying motion of live cells and cellular processes in vitro using harmlesslight levels without the need for adding… more
Abstract:This proposal by Jansen's Aircraft Systems Controls, Inc. presents an innovative solution for Active Combustion Control.Relative to the state of the art, this concept has the ability to provide frequency modulation (greater than 1000[Hz]) in combination with high amplitude modulation (in excess… more
Abstract:The objective of this proposal is to use the proprietary knowledge of Read Out Integrated Circuit (ROIC) unit cell and architecture design from Infrared Laboratories, Inc. (IRL) and Valley Oak Semiconductors, LLC (VOS, a wholly owned subsidiary of IRL), to develop and demonstrate a smart ROIC for… more
Abstract:The objective of this proposal is to use the proprietary knowledge of readout integrated circuit (ROIC) design gained through our past 20+ years of experience to investigate, research and design a dedicated readout architecture optimized for the high performance C-QWIP PDAs developed by the Army… more
Abstract:In Phase-I of the project we constructed a unique ROIC design based on our Amplifier-Shared-Dual-Band CTIA (ASDBC) technology to address the problems experienced by the existing ROICs. In Phase-II, we will refine and complete the design, manufacture the ROIC, fabricate the FPA, and test the… more
Abstract:The objective of Phase II is to implement and demonstrate the Open source Dynamic terrain API for SAF systems (ODAS) approach proposed, defined, and prototyped in Phase I for interoperability and correlation between dynamic formats and classic static, pre-distributed terrain solutions used by OneSAF… more
Abstract:Thin film solar cells are one of the most promising and cost effective means of generating electricity from sunlight. However, their manufacture requires the use of precision film thickness process control sensors in order to produce high efficiency and economically viable cells. Current film… more
Abstract:There is a growing need for sensors to detect radiological materials either for nuclear inspection or in the event of a nuclear attack. Thus, these sensors should have the capability of rapidly measuring key isotopic contents and ratios of actinides as well as other elemental composition of various… more
Abstract:We propose to develop an extended lateral range capability for a dynamic optical profiling system to enable non-contact, surface roughness measurement of large and aspheric astronomical optics in-situ during manufacture. This instrument will be capable of measuring more than three decades of… more
Abstract:Based on our proprietary fiber technology and extensive experience in fiber laser development, a new single-frequency 2Â?Ãm fiber laser source will be developed. The source includes advanced frequency-locking schemes for both center-line locking and offset-frequency locking, so as to address the… more
Abstract:In this proposal, we propose to demonstrate and build a widely tunable, narrow linewidth, single frequency fiber laser by developing an innovative Er/Yb-co-doped single mode fiber. Such a fiber laser is needed for coherent lidar and interferometric fiber sensing. In Phase I, we will design and… more
Abstract:There is an urgent need to develop a new high-energy 2m ultrafast fiber laser system in order to achieve the optimized efficiency of the ESASE process, which is beneficial in areas ranging from atomic and molecular sciences to chemical, materials, and biological studies. To reach the mid-IR… more
Abstract:ABSTRACT: High power fiber lasers have made significant progress in last several years. Several kW of output power has been demonstrated, which enables a wide range of new applications from laser welding, laser cutting, and laser drilling to military defense. While high power fiber lasers have been… more
Abstract:High power fiber lasers have made significant progress in the last several years. Ten kW of diffraction-limited output power at 1 micron from one single mode fiber has been demonstrated. Department of Defense (DoD) needs 100s of kW for missile defense as well as for protection against rockets,… more
Abstract:The ion exchange membrane is the key component in redox flow batteries (RFBs) as it critically determines the RFB performance and its economic viability. The membrane should possess the following properties to ensure high energy efficiency and long cycle life of RFBs: high proton conductivity, low… more
Abstract:This Small Business Innovation Research Phase I project aims to develop high performance anion exchange membranes for alkaline and low-temperature fuel cell applications based on a unique polymer-polymer hybrid scheme. The hybrid of these two polymers is intended to take advantage of combined… more
Abstract:This Small Business Innovation Research Phase I project aims to develop a lithium ion battery separator with high temperature stability by modification on the surface of the microporous PP separator via a unique chemistry. The feasibility of the proposed approach is founded on Amsens existing… more
Abstract:ABSTRACT: Current state-of-the-art, high voltage, pulsed power systems designed to drive high power microwave (HPM) sources utilize Marx generator designs. The high voltage insulation of these devices has been traditionally based on either high dielectric strength oil or sulfur hexafluoride (SF6).… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.