Abstract:This Small Business Innovation Research Phase I project will develop nanocomposite capacitor films with high energy density and low loss through the use of a unique synthesis process for high aspect ratio nanowires of previously unrealized compositions in this form. High power capacitors are a… more
Abstract:NASA requires new instrumentation technologies that can be applied to measure dynamic quantities such as acceleration and flow velocity under extreme temperatures where traditional sensing methodologies cannot be applied. The proposed Phase I SBIR research effort will seek to create accelerometers… more
Abstract:Processor speed has traditionally grown at a rate faster than that ofcommunication speed in computer and supercomputer networks, and it isexpected that this trend will continue even stronger, as we move into theexascale age in the upcoming decade. This has resulted in what is known asthe… more
Abstract:Our Fused-Realities-Assessments-Modules(FRAM) enables innovative new levels and types of automated quantification strategies for combining human and system performance in real-time for fused performance monitoring and after-action-review purposes. FRAM accomplishes this by fusing output of normative… more
Abstract:End Cryptographic Units (ECUs) and associated security module, are essential for protecting satellite communications that include payload data, control commands, status, and bent-pipe operations. Legacy systems such as require cryptographic needs for Communication security (COMSEC) and Transmission… more
Abstract:The objective of this SBIR project is to develop the technologies needed to allow innovative, high performance avionics systems, subsystems, and components that will enhance the capability of successfully achieving early intercept missile defense in current and future interceptors in all hostile… more
Abstract:Our system concept is based on a number of ultra-low power"remote nodes"that contain: (1) a battery section; (2) a sensor section (3) and electronics section. The remote nodes will automatically detect and classify high value targets to type using AD & D"s proven automated… more
Abstract:ABSTRACT: The goal of this Small Business Innovative Research project is to model the ability of human listeners to detect and identify specific auditory targets within complex, real-world sound environments. Previous approaches, based on linear auditory models, have produced unsatisfactory results… more
Abstract:Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. … more
Abstract:Constellation Technology Corporation (Constellation) is recognized as one of the world leaders in Materials Analysis. This abstract is intended to
explain Constellation's development of new innovative means for detection of inferior materials to differentiate a visibly identical counterfeit… more
Abstract:Dignitas Technologies Phase I approach will use our 20 years of CGF experience to identify a OneSAF system solution for accurate urban models. We will perform system engineering analysis of alternatives where necessary to provide a compliant system design that integrates key population modeling… more
Abstract:Fall-related events are the leading cause for injury deaths among people 65 years and older. Blast related balance dysfunction is a significant problem the military. Recent advances in Micro-Electrical-Mechanical Systems (MEMS) have made accessible a variety of extremely small, rugged, reliable, low… more
Abstract:The proposed solution exploits recent advances in computer vision to conceive of a single-camera + gyro + accelerometer vision-based navigation solution such that the processing will be lightweight (requiring only a single optical flow sample per frame). Known landmarks (natural or artificial) will… more
Abstract:FTT has designed, built, and tested a prototype of their Miniature Actuating Guided Nozzle Mechanism (MAGNM) for use with DACS thrusters. FTT"s MAGNM is a passive nozzle extension that surrounds the DACS thruster on a guide tube. When ready to deploy the nozzle extension, inert gas or… more
Abstract:Rotating-to-static seals are critical components of all gas turbine engines. The seals can significantly affect the efficiency, operability, and durability of a gas turbine engine. As such, any improvements to these seals are highly desirable. Improvements may come in the form of reduced leakage… more
Abstract:Cryogenic engines for in-space propulsion require innovative technologies to provide long-life, lightweight, and reliable turbopump designs. One area open for improvement is seals for rotating-to-static hardware. Florida Turbine Technologies, Inc. (FTT) is proposing the use of a floating seal for… more
Abstract:Pressure gain combustion has the potential to significantly improve the specific fuel consumption for gas turbine engines by realizing a pressure rise through the combustor as opposed to a pressure drop. One drawback to this form of combustion is the cycl
Abstract:ABSTRACT: Liquid rocket propulsion systems require the use of high pressure LOX, and therefore have the need for LOX compatible materials. This is especially true in LOX turbopumps, which have inducers, impellers, discharge volutes, and housings exposed to or submerged in LOX. The high pressures… more
Abstract:ABSTRACT: The future of gas turbine engines needed for propulsion and power in small unmanned military aircraft will hinge on the ability to enhance the efficiency for low fuel burn while maintaining world-class performance. Florida Turbine Technologies, Inc. (FTT) is currently developing… more
Abstract:This Phase I project will develop an innovative signal processing and information processing concept for improved detection in acoustically noisy littoral waters using existing towed arrays or hull-mounted arrays. These relatively shallow waters have many sources of noise and interference which make… more
Abstract:The proposed work seeks to clearly demonstrate the advantage of the multiple-input multiple-output (MIMO) radar architecture over a similar single-input multiple-output (SIMO) or phased array system; the benefit of applying data-adaptive signal processing techniques in favor of their… more
Abstract:Metallic Direct Digital Manufacturing (MDDM), is based on layer-by-layer metal deposition and has been developed to a sufficient state of manufacturing readiness where production applications have emerged in niche industrial sectors. DDM processes in general require the use of raw materials that are… more
Abstract:Thermal Stir Welding (TSW) provides advancement over the more conventional Friction Stir Welding (C-FSW) process because it separates the primary processes variables thereby allowing independent control of metal stirring and forging from the stir zone temperature. However, the feedback for precise… more
Abstract:ABSTRACT: The purpose of this proposal is to develop a new photosensitive optical material with working range from 3 to 5 um, which enables recording of high efficiency volume holograms with tolerance to high power laser radiation, and to demonstrate the use of those holograms for beam control of… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.