Abstract:In this proposal, Global Quality Corp., in collaboration with researchers from University of Cincinnati and Wright State University, proposes to develop NetSafe -a systemwide simulation software for predictive simulation of the fate and transport of chemical and biological agents in DWDS. Based on… more
Abstract:This Small Business Innovation Research Phase I project is to develop and commercialize a powerful new diagnostic assay platform for quantitative analysis of plasma from human blood using Differential Scanning Calorimetry. The platform will form the basis for generating novel high-throughput… more
Abstract:DESCRIPTION (provided by applicant): NaugaNeedles LLC in collaboration with researchers from Purdue University are proposing to develop an advanced new Ultra-Soft Atomic Force Microscope (USAFM). This USAFM can gently create images of soft biological sampl
es in buffer solutions with sub-picoNewton… more
Abstract:Despite the importance of jet fighter afterburner designs, there exists very little data on the majority of the individual components of jet fuel, especially JP-8, to enable development of a detailed kinetic mechanism. Although the Multi University Research Initiative program has been initiated for… more
Abstract:Conventional plasma waste reforming technology uses high temperature reactive plasma to breakdown wastes into combustible gas and solid waste. Extremely high plasma temperatures often lead to high energy consumption resulting low efficiency and formation of unwanted byproducts, such as nitrogen… more
Abstract:This award is funded under the American Recovery and Reinvestment Act of 2009 (Public Law 111-5). This Small Business Innovation Research(SBIR)Phase II project seeks to overcome the principal impediments of the inconsistent quality of metal matrix composite (MMC) materials from fly ash and aluminum… more
Abstract:DESCRIPTION (provided by applicant): The ability to genetically modify mice through methods of gene transfer in fertilized mouse embryos (transgenic mice) or gene modification in embryonic stem (ES) cells (gene targeting) has dramatically increased the va
lue and use of mice in biomedical research.… more
Abstract:DESCRIPTION (provided by applicant): Antibiotic resistant pathogenic microbes are responsible for thousands of human fatalities worldwide each year. The heightening risk of emerging pathogen resistance in clinical settings promotes the need for discovery a
nd development of new antibiotics with a… more
Abstract:DESCRIPTION (provided by applicant): SCR, Inc. (Louisville, KY) is developing a chronic implantable CPD system to treat HF patients who may be responsive to long-term counterpulsation support. The CPD has been developed for superficial implantation via a p
acemaker incision without the need to enter… more
Abstract:DESCRIPTION (provided by applicant): The long-term objective of this project is to develop validated, genetic biomarkers to aid in more accurate diagnosis and targeted treatment of schizophrenia and related neuropsychiatric illnesses, including bipolar di
sorder. In Phase I, SureGene demonstrated… more
Abstract:This award is funded under the American Recovery and Reinvestment Act of 2009 (Public Law 111-5). This Small Business Innovation Research (SBIR) Phase II project seeks to reduce the cost and risk of manufacturing nanoparticle/resin blends for coatings. Currently nanocoating resin manufacturing… more
Abstract:DESCRIPTION (provided by applicant): The outcome of this SBIR application will be a rat model of colorectal cancer (CRC), which can be used to discover new targets for colon cancer therapy. CRC rats will be produced using Transposagen's novel technology fo
r introducing somatic mutations in rats. A… more
Abstract:DESCRIPTION (provided by applicant): This project aims to rapidly produce rat mutants through a transposon-based method of mutagenesis. The rat is a favored model for many types of human disease for which mice are not suitable. The rat is the most relevant
model for cardiovascular and hypertension… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project addresses the development of a UV curable bulk nanocomposite having enhanced optical and mechanical properties for ophthalmic lenses. The work focuses the incorporation of metal oxide nanoparticles into a transparent polymer to engineer… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project tests the feasibility of using a highly innovative polarized multi-wavelength light extinction spectroscopy approach for on-line non-destructive characterization of coated nanoparticles and nanoparticle agglomerates. From extinction… more
Abstract:This SBIR Phase I project is to prove the feasibility of an innovative weld monitoring technology. This innovative technology is characterized by (1) an innovative non-transferred arc sensor which responds to both surface conductivity and sensor-to-joint distance and can be used to monitor the joint… more
Abstract:Gas Metal Arc Welding (GMAW) is the most widely used welding process. It is also the major process used in shipbuilding. In traditional GMAW and all its modifications, the current which melts the wire is the same as the current which heats the base metal. The base metal heat input is thus… more
Abstract:Orbital pipe welding systems are not true emulation of skilled welders who adjust welding parameters based on observation on the weld pool. This SBIR Phase II project aims at the development of commercial prototype systems which can adaptively adjust welding parameters based on an observation on the… more
Abstract:The objective of the proposed research aims to develop Reduced Order Models (ROMs) (i.e. POD, HB, combined POD and HB) based upon flight data to better predict the aircraft aeroelastic response at next flight condition, e.g. higher Mach number. By incorporating flight test data and using the… more
Abstract:CFD modeling and simulation has been heavily invested in decades of manpower by a large community of researchers. However, the excessive numerical diffusion inherently caused by discretization errors plus the possibly largest/finest grid requirement for rotor wake modeling prevents CFD to be… more
Abstract:This SBIR aims at developing a high-fidelity, yet efficient and easy-to-use, composite rotor blade and wing section design environment to facilitate rapid and confident aeromechanics assessment during conceptual design stages. A well-known technical barrier for composite rotor blade and wing section… more
Abstract:The proposed research program aims at developing a variable-fidelity software tool set for aeroservothermoelastic-propulsive (ASTE-P) modeling that can be routinely applied to the design of aerospace vehicles. The toolset can be applied to conventional vehicle types as well as hypersonic vehicles.… more
Abstract:DESCRIPTION (provided by applicant): A high percentage of the ~ 470,000 children born prematurely each year in the US require intravenous feeding after birth because they do not tolerate oral feeding. This is accomplished with a total parenteral nutrition
(TPN) solution, which is prepared from… more
Abstract:This Small Business Innovation Research (SBIR) Phase I research project aims to develop a yeast-based platform for the generation of novel sesquiterpene compounds, as well as commercially unavailable sesquiterpene scaffolds. The technique combines metabolic, protein and biochemical approaches to… more
Abstract:DESCRIPTION (provided by applicant): Cervical cancer is one of the most common cancers affecting women and is a worldwide health problem. Unlike most cancers, cervical cancer is caused by a virus - the human papillomavirus (HPV). Two preventative vaccines
against HPV were recently licensed in the… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.