Abstract:Cavitation and particle erosion in hydraulic turbines present unwanted consequences such as flow instabilities, excessive vibrations, damage to material surfaces, degradation of equipment performance, and inefficient energy generation. These problems are becoming more critical because the propensity… more
Abstract:The projected population growth and limited availability of fresh water sources have forced utility companies and industries to consider the use of alternate water for non-potable application, such as industrial cooling. While in excess of 100 billion gallons per day of water is used for cooling… more
Abstract:We propose to advance the state-of-the-art of durable superhydrophobic coatings for application on printed circuit boards (PCBs) found on underwater vehicles exposed to hydrostatic pressures up to ~10 atm, corresponding to depths of ~100 meters in fresh or salt water, through a combination of… more
Abstract:ABSTRACT: We propose to demonstrate the benefits of a self-healing coating (SHC) system (comprised of MIL-PRF-85285 compliant self-healing top coat; MIL-PRF-23377 Class N primer; chromate-free pretreatment) on repaired and restored aluminum. Innovations are proposed for a self-healing… more
Abstract:ABSTRACT: Due to their high strength to weight ratio, fiber reinforced composites (FRCs) are attractive structural materials for Air Force applications. Multi-functional self-healing FRCs will be beneficial in applications that either currently use FRCs, or will use them in the future. The… more
Abstract:This proposed study intends to develop a model and prototype of a flapping winged vehicle through the incorporation of elastic components. This will allow the manufacture of such vehicles with greatly enhanced flight duration and agility. Work will include the design, prototyping, and testing of… more
Abstract:Minimization of blade tip clearance in the high pressure turbine and high pressure compressor is very important for turbine efficiency, reduction of emissions, and lower rotor inlet temperature which extends the service life of the engine. This can result in increased payload, extension of mission… more
Abstract:DESCRIPTION (provided by applicant): The purpose of the present project is to implement a new RFID tagging system for rapid identification of vials in biorepositories. It is based on the PharmaSeq laser light- activated microtransponder, which is also known as a p-Chip. Its main advantages are its… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project aims at developing a Radio p-Chip, the first microchip with a sensor that can be injected into live cells, and transmit information from within without a physical connection. The design combines elements of laser light-activation of the… more
Abstract:The Navy is interested in developing high power and high operation efficiency pumps at 808nm for multiple Navy applications. VCSEL technology offers an excellent choice for the development of such laser pumps. Princeton Optronics has developed the technology of high power VCSEL arrays delivering… more
Abstract:Vertical cavity surface emitting lasers (VCSELs) is a new technology which can be used for developing high performance laser components for Atom-based Sensors technology. The narrow linewidth of these devices combined with good polarization extinction ratio and large spacing between the longitudinal… more
Abstract:Megawatt class laser systems using Diode Pumped Alkali Lasers (DPAL) could be possible because of their extremely low quantum defect which minimizes thermal loading and, like other gas lasers, the gain medium can be flowed to reduce thermal management requirements. One key to producing efficient… more
Abstract:We propose to develop an efficient, tunable Q-switched SSL operating at a wavelength of 1651 nm with pulse energy>1 mJ at 2000 Hz repetition rate with in-band laser diode pumping. We will leverage initial work carried out during Phase I of this program to pursue two approaches: (i) a tunable… more
Abstract:Princeton Lightwave proposes to develop a solid state short-wavelength infrared (SWIR) detector technology with true single photon sensitivity and a cutoff wavelength beyond 2.2 um. Both single photon avalanche diodes (SPADs) and negative feedback avalanche diodes (NFADs) will be fabricated. These… more
Abstract:ABSTRACT: Princeton Microwave Technology [PmT] is proposing the development of compact microstrip based dual mode resonators for the the design of the low cost diplexers for the GDPAA program.Miniature dual mode resonator based diplexers, in which the main feature and advantage lies in the fact… more
Abstract:DESCRIPTION (provided by applicant): Atopic dermatitis is a chronic dermatological condition afflicting mostly infants and young children. Current treatments are associated with a wide range of side effects therefore development of novel therapeutic agentsthat are efficacious and have an improved… more
Abstract:An effective approach to addressing the needs of the American energy market includes both the exploration and implementation of alternative energy sources along with improvements in the efficiency. Thus far, a relatively untouched sector of energy consumption has been the efficiency of household and… more
Abstract:In this STTR program, Structured Materials Industries, Inc. (SMI) and partners are developing high efficiency, switchable RF filters. The technical approach is based on thin films of paraelectric BaxSr1-xTiO3 and SrTiO3, which can show piezoelectric behavior under an applied DC bias. When… more
Abstract:Thermoelectric devices offer a simple and reliable means to convert radioisotope thermal energy into useable electrical power.Present thermoelectric devices based on bulk materials are limited by low conversion efficiencies, due to fundamental limitation of identifying materials with both a high… more
Abstract:GaN-based devices are currently grown on foreign substrates such as SiC and Al2O3, due to the lack of high quality GaN substrates. It is well known that the use of foreign substrates limits device performance due to a high dislocation density in the GaN film. Structured Materials Industries, Inc.… more
Abstract:We propose to develop a universal atomic magnetometer magnetometer capable of operation as either a three-axis vector atomic magnetometer or a scalar (total field) atomic magnetometer. We furthermore operate the magnetometer in a regime that is inherently free of sources of drift in the lasers or… more
Abstract:The Navy seeks to deploy sensitive atomic magnetometers on small, inexpensive UAVs that deploy from a sonobuoy tube. There are three primary challenges with this approach: First, existing magnetometer systems are too large to fit on a typical tube-launched UAV. Second, sources of magnetic noise such… more
Abstract:Renewable energy resources are being adopted by government entities, utility power providers and more recently by industrial behind-the-meter end-users as well. Solar power is attractive especially in areas where electricity costs are high, such as California and New Jersey. New Jersey is… more
Abstract:As renewable resources such as wind and solar start to penetrate the electrical infrastructure, the transient behavior of these resources requires energy storage systems, such as batteries or flywheels, to buffer the fluctuations in output. Additionally, current silicon based… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.