Abstract:This Small Business Technology Transfer Research (STTR) Phase I research project proposes the enhancement of an existing set of modeling, analysis, design, and monitoring tools for use in the medical domain so that safe, reliable systems can be assembled from plug-and-play medical devices. This… more
Abstract:The goal of this SBIR project will be to test the feasibility of using low dielectric fabrics and low dielectric thermoset resins as advanced materials for submarine antenna radomes that allow thinner diameter, low cost and low weight radome development with decreased transmission loss.
Abstract:The goal of this SBIR project will be to use composite materials with a unique combination of low dielectric constant and loss, high bending modulus, and high tensile strength to make tri band radomes for airborne antennas with superior transmission loss and insertion angle.
Abstract:The Small Business Innovation Research (SBIR) Phase I project will assess the feasibility of using blends of polymers to make high strength, low dielectric fibers to be used as reinforcements with glass fiber in high frequency circuit board substrate materials. The innovation will allow a reduction… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project will test the feasibility of making light weight and high modulus polymer composite materials, suitable for the aerospace environment through incorporating unique high modulus polypropylene fiber into fabrics containing carbon fiber in… more
Abstract:Energy usage will continue to increase at a dramatic pace for the foreseeable future, endangering the security, economy, and environment of the nation. One means of meeting this challenge is the replacement of liquid transportation fuels based on petroleum with cellulosic bioethanol. However,… more
Abstract:This work will continue the use of numerical methods to determine optimal design parameters for a compact hybrid fuel cell power system driven by a statistically determined load profile. Detailed physics-based models will be used to represent the bahavior of the components in the hybrid system. The… more
Abstract:DESCRIPTION (provided by applicant): Multiphoton microscopy enables deep imaging with less overall photobleaching than with wide-field or confocal microscopy, and it has now become the primary fluorescence imaging technique for a variety of biological samp
les and systems. For these difficult… more
Abstract:A method and its related technology are presented for decontaminating the bilge water removed from Marine Corps Expeditionary Fighting Vehicles (EFVs). The proposed process is based on the utilization of a unique proprietary regenerative filtration technology incorporating easy cleaning by… more
Abstract:DESCRIPTION (provided by applicant): Most mechanical ligations of living tissues using surgical sutures require a combination of a thread and needle combination. In most cases, the needle diameter far exceeds that of the suture, which can result in leakage
of bodily fluids, including blood, through… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project describes an innovative approach to encapsulating nanocrystals (quantum dots and rare earth doped inorganics) using functionalized perfluorocyclobutyl (PFCB) polymers. This project will expand the range of ligands synthesized in Phase I… more
Abstract:The Small Business Innovation Research (SBIR) Phase I project describes a new approach to solving the problem of creating higher performing Electro-Optic (EO) polymer materials which have significantly lower cost than the current very expensive multi-step synthesis. The proposed technology also… more
Abstract:We propose to carry out research and development of highly efficient broadband cryogenic switches using voltage controlled 2D electron gas in III-Nitride heterostructure field-effect transistors (HFETs). Unlike RF switches based on regular semiconductor devices, key characteristics of properly… more
Abstract:Sensor Electronic Technology, Inc. proposes to use QD-like fluctuations of InGaN QW with controllable spatial distribution for high efficiency green LEDs. We will investigate both theoretically and experimentally the performance of green InGaN MQW structures with fluctuations of composition and… more
Abstract:Ultra-dense integrated circuits with sub-10-nm features would provide enormous benefits for all information technologies, including computing, networking, and signal processing. However, it is widely accepted that a radical paradigm shift from purely CMOS technology to hybrid CMOS/nanodevice… more
Abstract:This Small Business Innovation Research Phase I Project proposes to develop a new epitaxial growth process for production of long-lasting (lifetime > 20,000 hours), high-efficiency (wall-plug efficiency > 10%) deep ultraviolet light emitting diodes (DUV LEDs) based on III-Nitride materials. Due to… more
Abstract:HAMAC is an innovative aircraft design that combines solar cells for power, fuel cells for energy storage, a high-altitude prop and electric motor with thrust vector control, and a morphing structural design that can take off conventionally, or be carried to altitude by rocket, aircraft, or balloon.… more
Abstract:This Small Business Technology Transfer (STTR) Phase I project will develop a method for improving the transmembrane conductivity of Nafion. This project proposes to develop a method for modifying the orientation of the conductive channels though which ions traverse in ionomer membranes. Shear… more
Abstract:DESCRIPTION (provided by applicant): Chronic, neuropathic pain is one of the most important unmet medical needs in the United States, affecting tens to hundreds of millions of people nationwide at some time during their lives. Novel therapeutic approaches are desperately needed. The brain peptides… more
Abstract:DESCRIPTION (provided by applicant): Assays are being developed in efforts to reduce the number of animals required for research. In particular, cell based systems that can evaluate a variety of compounds and/or screen single compounds with many cell types would provide the most advantageous… more
Abstract:DESCRIPTION (provided by applicant): Transplantation of islets of Langerhans for the clinical treatment of Type I diabetes has had a resurgence of interest due to results obtained using the "Edmonton protocol". However, at this time, procurement of donor pancreases for islet isolation and… more
Abstract:DESCRIPTION (provided by applicant): Allogeneic human heart valves are used in approximately 20% of the tissue heart valve procedures performed annually. Most allogeneic human heart valves (also known as allografts or homografts) are cryopreserved and stored in the vapor phase of liquid nitrogen… more
Abstract:DESCRIPTION (provided by applicant): Preliminary data demonstrate that a radically different approach to MRI gradient coil design permits substantial advantages in all respects; especially in short, high-field magnets - higher gradient strength, reduced acoustic noise, and reduced nerve stimulation.… more
Abstract:DESCRIPTION (provided by applicant): The wound repair process in skin is initiated immediately after an injury and induces a cascade of events including inflammation, proliferation, and scar production/tissue remodeling. One of the common complications of wound healing is excessive scarring, leading… more
Company:I. E. T., Inc.Agency/Program/Year/Phase:USDA / SBIR / 2006 / 1
Abstract:Concerns regarding disease resistance in plants, the use of pesticides in the environment, and occupational exposure, have promulgated the development of alternative methods for traditional disease control practices. This project examines a possible alternative to conventional fungal control… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.