Abstract:In a CDC-sponsored SBIR Grants 2000 Phase I Solicitation, proof-of-concept of the patented wearable Eye Com-6 Biosensor-Communicator-Controller (EC-6) as a reliable drowsiness detection tool was demonstrated. Consisting of 2 IR-sensitive microcameras, IR eye-illuminating LED's and detectors affixed… more
Abstract:The proposing company's reformable, reusable tooling can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for prototyping iterations, short-run or low rate manufacture through lengthy product cycles. This Phase II… more
Abstract:The use of reformable, reusable tooling can greatly reduce the time, cost and skills required for conventional tooling production, and no waste products are generated since the tooling materials themselves can be rapidly cycled from a hard tooling-capable state to a liquid-like state and back to the… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project will demonstrate superior power-delivery, rapid-charge, and long cycle-life performance of prototype carbon-coated, nanoparticle-based electrodes for use in inherently safe, moderate-to-large sized lithium ion batteries of various… more
Abstract:Currently, the benefits of objective trail information are limited in rural areas because the team of people required to complete the UTAP is difficult and costly to assemble. The USDA Forest Service is responsible for the management of 133,000 miles of trails and public lands with trails held by… more
Abstract:The goals of this Phase II SBIR include development of a strike planning deconfliction system, providing a real-time implementation for replanning, providing a mechanism to deconflict with fallout of Weapons of Mass Destruction (WMD), and providing a scalable and extensible mechanism to support… more
Abstract:Practical methodologies were developed in Phase 1 to efficiently design nonlinear composite ducts and panels with large anomalies and cutouts for buckling, will be verified in Phase II with a comprehensive test/analysis correlation program. The analysis system is automated and integrated into the… more
Abstract:The Feather Weight Display is a novel design and integration of industrially mature technologies including ultra-density silicon circuits with ultra-dense chip-to-chip interconnections, ultra-density VCSEL arrays, nonlinear photonic upconverting color materials, and nonlinear optical elements. To… more
Abstract:This Heavy Fuel Engine (HFE) proposal describes an innovative propulsion system that meets the near term Army FCS class II OAV propulsion system requirements. The proposed approach is an innovative Supercharged Injected 60 degree V-twin uniflow four-cycle design of 450cc cylinder capacity designated… more
Abstract:Next generation General Aviation (GA) Sport Class air vehicles limited to 1200lbs, represent the first opportunity to overhaul the FAA certification process necessary to manufacture affordable aircraft. With propulsion representing over one-third of the direct manufacturing costs of the entire… more
Abstract:DESCRIPTION (provided by applicant): The goal of this project is to produce "humanized" livers in large animal models such as sheep and pigs that can serve as a reliable source of significant numbers of functional human hepatocytes. The isolated human hepatocytes and/or "humanized" livers can be… more
Abstract:76166-Although permeable reactive barriers are an important new treatment option for groundwater remediation, no reliable methods are available to monitor or predict their long-term behavior. The large-scale implementation of reactive barriers will require a means of monitoring their long-term… more
Abstract:75605-The United States Department of Energy has estimated that from the 1940s through the 1970s, 126,000 cubic meters of transuranic wastes were disposed of by shallow burial and other techniques at sites owned and operated by the federal government. The excavation and retrieval of the transuranic… more
Abstract:We present a highly qualified team, including security experts and technical experts, and a patent-pending new microcantilever array sensor technology (which has been tested for chemical and explosive detection) to be integrated with low-cost electronics and networking modules and implemented as… more
Abstract:DESCRIPTION (provided by applicant): Falls are the leading cause of US injury deaths among people 65 and older, and at least two of every three residents of skilled nursing facilities (SNF) fall at least once each year. This Phase I study will assess key parameters of a new wireless, non-restraint… more
Abstract:The primary goal of the proposed Phase II effort is to develop monolithic distributed optoelectronic crossbar modules for implementation of high performance distributed crossbar backplanes. The high density monolithic crossbar modules will enable distributed backplane architectures that are highly… more
Abstract:Optoelectronic technologies make it possible to construct systems that are tolerant to the unique threats of aerospace environments. The goal of this proposed Phase II effort is to develop, fabricate, and demonstrate OptiComp Corporation's (OCC) WDM optoelectronic transmitter and receiver… more
Abstract:The goal of this proposed Phase I STTR effort is to demonstrate the feasibility of incorporating photonic crystal (PC) technology within OCC's existing optoelectronic module technology. This will be accomplished through the design and modeling of PC light emitters and waveguides, as well as… more
Abstract:The Air Force has identified a need for a system that provides improved firefighter and rescue personnel access to cockpits and speeds pilot extraction under ground emergency conditions. Emergency personnel must be able to open the canopy, accomplish engine shutdown, make the ejection system safe,… more
Abstract:The Missile Defense Agency is seeking concepts and associated technologies for the next generation multi use kinetic kill vehicle that will allow effective vehicle attitude and divert control in both exo- and endo-atmospheric flight regimes. In addition, they seek new concepts for internal vehicle… more
Abstract:The Navy has identified a need for a very compact and rugged attitude control system to maintain "nose first" attitude for projectiles that travel outside the atmosphere. This solicitation specifically addresses an attitude control system design sized to provide torque sufficient to rotate a 100 kg… more
Abstract:The proposed Phase II effort is to build two complex compound prototypes to remove 4.6 kW heat from laser diodes at 280K to 300K. The prototype will be delivered to MDA upon completion of the Phase II project. The technology is based on a proven solid-vapor sorption complex compound technology… more
Abstract:Prevention and treatment of hypothermia during casualty transport is a major concern during military operations. Warming blankets are available at some field surgical centers, but nothing is currently available during air transport. Proposed is a rechargeable portable warming blanket system… more
Abstract:Liquid rocket engines may be run for repeatedly over extended periods of time, requiring active cooling. An efficient means of cooling LRE nozzles involves using the liquid fuel or oxidizer itself to provide the cooling, often referred to as regenerative cooling. SEA's liquid rocket combustion… more
Abstract:This effort will improve plume signature prediction of hydrocarbon burning liquid rocket engines by increasing the fidelity of the soot production models used to predict exhaust conditions. The new models will include improved kinetic mechanisms as well as prediction of soot particle size, shape… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.