Abstract:… dressing will be formulated and tested for mechanical properties and drug delivery capabilities. It will then be tested in vitro for treatment of wound contracture. In the potential Phase II follow-on project, a full prototype of the dressing would be constructed, and… more
Abstract:…gradation in the presence of communication latencies as small as 100 milliseconds. These latency and bandwidth requirements severely hamper use of teleop systems in situations where latency is high and/or bandwidth is low. The goal of the proposed work is to construct such a… more
Abstract:… capsule maintenance following a launch and eliminate launch debris. ADA Technologies is proposing to develop and test a fast-actuating, completely reusable capsule closure meeting the key Navy requirements. The selected design utilizes an innovative dome constructed of eight… more
Abstract:… thermal energy storage (TES) to enable"rightsizing"of environmental control units (ECU) and improve overall efficiency through reduced peak loads, more stabilized ECU operation, and off-peak thermal energy storage. The Aqwest TES has a very simple construction and… more
Abstract:…vania. They will spearhead three complimentary investigations into the development of verification and validation (V & V) approaches for adaptive systems protected by run time assurance (RTA) mechanisms. Two of these approaches involve using proof construction formalisms… more
Abstract:… range resolution available. During the proposed Phase II effort, Bridger will develop, field test and deliver a fully operational dual-mode 3D imager and FSO communications system. To do so, Bridger will refine its system models and prototype design and then construct the… more
Abstract:…ns for information product generation. We present Phase II of the Automated PrOduct GEneration and Enrichment (APOGEE) effort. APOGEE automates the creation of information products; learning the creation process by example. APOGEE can uses automatically constructed content… more
Abstract:…enter at San Antonio (UTHSC-SA), proposes to develop an Electrophoretic Decellularization Chamber (EDC) technology to produce a rigidity tuned Electrophoretic Decellularized Bio-Scaffold (EDBS) Cranial Bone - ExtraCellular Matrix (CB-ECM) Cranioplasty Prototype Construct (CPC)… more
Abstract:… potential instabilities, borrowing the idea from shock capturing schemes. We will assess the AVC method in different types of numerical schemes, particularly the spatial discretization scheme. A procedure to determine model parameters dynamically will be constructed… more
Abstract:… a large-scale, dynamic and fast approach for maximizing the ability of intelligence analysts to analyze text-based communication to assess the ever-changing content and trend. With DST, the evolution of the target topic is tracked in real-time. The text network is constructed… more
Abstract:…the soldier. Lynntech proposes a safe and novel solution to address these concerns by developing a scrubber based off a high surface area macroporous ionic resin with advanced grafting techniques using amines to create a fully regenerable sorbent to be used for carbon … more
Abstract:The military desires an improved trap to capture and hold arthropods that may carry disease causing pathogens. A continuous source of carbon dioxide is needed over an 8 hour period to attract flea and tick species that are subsequently trapped and held alive… more
Abstract:…1000D Duck cloth. Target is to create a lighter weight material characterized by flame retardant properties with zero melt drip; provide superior water proof and petroleum oil and lubricant resistance; incorporate recycled fibers as a principle component of construction; and… more
Abstract:… research in solar physics: key components include parameterizing observations of solar magnetic fields, surface- and sub-surface plasma flows, prior event history, and chromospheric/coronal pre-event energization. A forecast of solar activity is constructed… more
Abstract:The Navy has invested significant resources in constructing, maintaining and updating various information systems/databases that contain data/information that needs to be manually filtered to detect/remove anomalies prior to transforming it to perform useful analyses. The… more
Abstract:Development of semantic technologies to support materials design and development. This project is intended to start constructing the building blocks for 1. Common Vocabulary Development, 2. Annotation, exposure, and discovery of existing published material properties and… more
Abstract:ABSTRACT: SSCI proposes creation of an Intelligent Course of Action Learning System (iCOALS), building on extensive past experience in learning advanced fighter combat maneuvers from simulation. By learning from repeated simulations, robust strategies can be constructed that… more
Abstract:… line tension reaches the predetermined level, the line will be released and can fall to the ground. After release, the SkySight Quick Release Connector body remains attached to the utility pole and the line can be easily reached for line reattachment. Constructed from… more
Abstract:… (TRUST) is an intelligent testing system that rapidly probes, characterizes, and assesses the safety boundaries of the complex autonomous controllers for UAS. TRUST couples the knowledge of the human test expert with an optimizing test search algorithm in a constructive… more
Abstract:… High voltage protection will be built into the antenna to prevent accidental electrical contact with high voltage power lines up to 25kVDC RMS. Prototypes of the high voltage protection devices will be developed and tested. The antenna design will be modeled before constructing… more
Abstract:… Protective Equipment (PPE) for force protection is critical for Soldier survivability and effectiveness in a range of combat operations. The Army needs: (1) new anthropometric casualty estimation tools and (2) the integration of these tools with constructive simulation,… more
Abstract:… to provide thermal management for aircraft systems and/or mission payload. The key ingredient of the composite heat exchanger is a novel technique for piercing 2-D composite laminate with ultra-high thermal conductivity rods and/or fins, allowing the construction of sandwich… more
Abstract:… scene projector. In Phase I, POC will demonstrate the feasibility of MSFDSP by researching a variety of technical approaches, choosing an optimum design approach, and developing an estimate of expected performance. A proof-of-concept prototype will be constructed… more
Abstract:… sensor devices will make possible new classes of imaging technologies, such as high-resolution, high-speed, low-cost imager systems. Conventional approaches to fabricating large imaging arrays have either been based on stitching of smaller arrays or actual physical construction… more
Abstract:… with broad band optics. This innovation enables the UVIR system to conjoin separate extended IR and UV collimated images into a co-registered single image. During Phase I, based on a detailed design modeling, optical materials and coatings selections, POC constructed testing… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.