Abstract:… a collection of solid-state Lighting Modules based on high powered white Light Emitting Diode (LED) sources that can be networked together to provide sufficient illumination for any task. The devices can be powered by batteries or wall power, and are constructed from… more
Abstract:… range resolution available. During the proposed Phase II effort, Bridger will develop, field test and deliver a fully operational dual-mode 3D imager and FSO communications system. To do so, Bridger will refine its system models and prototype design and then construct the… more
Abstract:… and commercial activities. Potential applications include: methane leak detection from pipelines, well platforms, and holding tanks for the petroleum industry, biomass density estimation in managed ecosystems for agriculture and timber industries, carbon dioxide… more
Abstract:This proposal is to prove the feasibility of a new and novel zinc-based alloyed coating on both the manufactured Grade 270 0.5 and 0.6 low-relaxation strands and for the individual wires used to make the 7-wire strand for prestressed concrete used in bridge construction. The… more
Abstract:… propose to develop a robust computational framework to enable geometrical optimization of complex non-axisymmetric exhaust systems with controlled accuracy and low computational cost. In this framework, Reynolds-averaged Navier-Stokes (RANS) surrogates will be constructed… more
Abstract:… with policies, users, and defenses. To address these needs, we propose a Phase I effort to design and demonstrate a system for Modeling Cyber Behaviors to Wargame and Assess Risk (MOC-WAR). MOC-WAR provides a hybrid, modular behavior modeling framework to construct flexible… more
Abstract:… synchronized with ship motion. The flight director will incorporate detailed models of: (1) the MH-60 platform and control systems; (2) flight-deck motion in varying sea-states; and (3) environmental effects, including turbulent wind gusts. Finally, we will construct… more
Abstract:… Adaptive Game-Based Environment using a Pedagogic Interpretation Engine (MAGPIE). Based on our successful Phase I, we propose a full-scope Phase II development effort focused on four elements: (1) a suite of intuitive authoring tools that enable course designers to construct… more
Abstract:… in the simulation, driving up the manpower cost of conducting JTAC training. To fill the roles, communications, and behaviors of White Force participants in simulation-based training environments, Charles River Analytics proposes to design and demonstrate a … more
Abstract:… capability, we propose to develop and evaluate a full-scope prototype of Modeling Operator Reasoning and Performance for Human-in-Control Simulation (MORPHIC). MORPHIC provides a graphical development and run-time environment for non-technical experts to construct and… more
Abstract:…, Triplexer, and Quadruplexer Designs currently employ bulky, machined cavity housings, are quite heavy, and cannot easily be reconfigured to meet changing system requirements. Cobra Design & Engineering, Inc. intends to employ a tubular coaxial resonator construction… more
Abstract:… assurance (IA) and built-in test (BIT), the CEI team will create a fully functional electronic stack that will demonstrate diverse RF waveforms applicable for both radar and communications functions. The Phase II work will include the final design, modelling, construction,… more
Abstract:… to high-temperature pyrolysis process converting it to a porous ceramic matrix and locking the fiber reinforcement in place. Porosity of fabricated plates will be characterized using pycnometer and compared with porous metallic plates with drilled holes constructed for… more
Abstract:… engines have featured relatively simple axisymmetric exhaust shapes with several moving parts; however, future engine exhaust systems are expected feature compact, sinuous ducts with complex non-axisymmetric shapes, fixed exit areas, thrust vectoring etc., constructed… more
Abstract:Industrial hydrogen production relies primarily on natural gas and hydrocarbon feedstocks to drive the various reaction chemistries that lead to hydrogen generation. Carbon dioxide, the ultimate co- product when such feedstocks and processes are employed,… more
Abstract:… cost tanks by utilizing recently-developed, low-cost fibers and graded composite designs. The Phase I/Phase II project seeks to reduce the cost of hydrogen storage vessels for fuel cell powered cars by 25% by using low-cost carbon fibers in a graded construction… more
Abstract:…hem more commercially viable. Phase I will use a superionic electrolyte and sulfur-immobilized carbon matrix to reduce sulfur loss to the electrolyte and to increase the sulfur utilization. The full lithium-sulfur batteries based on these components will be constructed to… more
Abstract:… and tested extensively in Phase II as a product demonstration unit. Applications of the developed control approach include next generation tactical fighter, advanced mobility, or related platforms. Commercial applications include more electric aircraft, construction and… more
Abstract:…ns for information product generation. We present Phase II of the Automated PrOduct GEneration and Enrichment (APOGEE) effort. APOGEE automates the creation of information products; learning the creation process by example. APOGEE can uses automatically constructed content… more
Abstract:…. When comparing SiC and traditional silicon-based MOSFETs, SiC MOSFETs provide higher current carrying capability allowing for smaller package weights and sizes and lower operating temperature. Eagle Harbor Technologies (EHT) is proposing to design, construct, and test… more
Abstract:… testing service, without conflict of interest and independent from chemical looping technology developers and material suppliers. The service will facilitate the development of chemical looping technology which is a potentially attractive approach for carbon… more
Abstract:…d to include the equipment changes.
Commercial Applications and Other Benefits: The principal application for the enhanced E- CACHYSTM technology is carbon dioxide capture from the flue gas of coal-fired power plants. Other related applications include the removal of carbon … more
Abstract:…enter at San Antonio (UTHSC-SA), proposes to develop an Electrophoretic Decellularization Chamber (EDC) technology to produce a rigidity tuned Electrophoretic Decellularized Bio-Scaffold (EDBS) Cranial Bone - ExtraCellular Matrix (CB-ECM) Cranioplasty Prototype Construct (CPC)… more
Abstract:This proposal will enable the development of a system that will synergistically capture carbon and treat wastewater at power plants. The system will have higher water recovery and treat more problematic water using less energy compared to state of the art technologies.
Abstract:… to dissipate heat. Both approaches have detrimental impact to available rack space utilization for computing equipment and introduce unnecessary failure points. This proposal seeks to leverage the Flexible Infrastructure (FI) advancements developed for new ship construction… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.