Abstract:…xperiments at an environmental reaction chamber to demonstrate the instruments potential for exploring the role of amines in the formation and growth of atmospheric aerosols, development of custom data analysis software routines, and designing the prototype to be constructed in… more
Abstract:…ional spark plug will be able to initiate the ignition at fuel-air ratios that are impossible to ignite without the optical augmentation. We will take advantage of the recently rapid development in commercial high-power LEDs in the ultra-violet (UV) range and construct… more
Abstract:There is a need for extremely lightweight low power instrumentation for real-time measurement of isotopic variants of carbon dioxide (CO2) in ambient air, suitable for use on un-manned aerial vehicles, to allow better quantification of sources and sinks of… more
Abstract:This project will develop high performance sealing plugs for use in deep borehole disposal of nuclear waste and commercial wells. The technology provides a high strength, high corrosion resistant well sealing material superior to conventional cements.
Abstract:…em behavior in complex subsurface environments. A cloud based predictive assimilation framework (PAF) is being developed which will provide timely and actionable information on current and future subsurface site behavior to stakeholders. This software is being constructed such… more
Abstract:In what follows, we propose a rather unique way to both design and construct new and certifiable composite material NDI standard calibration blocks that can be used by Air Force NDI technicians to both calibrate their existing NDI equipment and also qualify new and innovative… more
Abstract:…red for switchgrass engineering and characterization because plants need to grow to maturity and at least two cycles are required to show that the desired traits are reproducible. Demand for low lignin switchgrass will significantly increase in the next few years. Construction… more
Abstract:…ease in cargo capacity provides the MTVR to be outfitted with the MAS up armor protection minimizing impacts to vehicle performance. One obvious approach to reducing wheel assembly weight is to change materials used to make wheel components from its current steel construction to… more
Abstract:…ential to reduce electric energy consumed by lighting from 694TWh in 2010 to 375TWh in 2030. Overcoming the materials and manufacturing cost barriers in order to accelerate adoption therefore represents a significant potential opportunity for the United States. Construction… more
Abstract:…ng of plasmas is limited to relatively short record lengths and is very expensive. Portions of the tradeoff space where slightly reduced spatial resolution allows gains in record length and reduced costs are poorly explored. HyperV Technologies Corp. proposes to construct a 1000… more
Abstract:… gain. During this project, Heliotrope will utilize scalable solution-based techniques to create unique nanocrystal electrochromic layers. The novel electrochromic layers will be initially examined for compatibility and performance, then subsequently used to construct… more
Abstract:… functionalize the arrays and turn them into MCPs will be advanced. The extensive and unique testing capabilities at ANL, UC, and UCB/SSL will be used to characterize the MCPs and guide development efforts. The large-area high resolution MCPs will enable construction of… more
Abstract:…reviously outlined barriers to broad LIS utility and commercialization (high performance computing, big data, user interface, and licensing issues); (b) design the proposed LIS-cloud web service, model-data interface, database services, and user interfaces; (c) construct a… more
Abstract:Deep geological disposal is a promising and widely accepted method for long- term disposal of nuclear waste and the option of deep borehole disposal is considered an inherently safe method. The feasibility of the deep borehole option relies upon the design and construction of an… more
Abstract:… driving electric fields can be applied without depoling. This is a necessary characteristics for compact, high power, broad bandwidth acoustic projectors. This joint Phase I design and analysis effort will provide the foundation for a Phase II effort focused on … more
Abstract:…nificantly. Approaches are therefore needed to develop low cost CO2 capture processes with high CO2 recovery. Gasification of coal to synthesis gas followed by conversion of all carbon fuel value to hydrogen in water gas shift (WGS) reaction and subsequent separation of carbon… more
Abstract:…, thus reducing greenhouse gas emissions by 20 percent. This enormous potential continues to go unrealized due to various technical and financial obstacles with traditional steam and organic Rankine cycle (ORC) systems. An alternative cycle using supercritical carbon … more
Abstract:…lf-sealing technology that can impart self-sealing capability to the most vulnerable areas of integral aircraft fuel tanks. Targeted application of the self-sealing materials will reduce the weight and fuel-volume penalty associated with conventional fuel bladder constructions.… more
Abstract:…roper angle; to verify proper insertion; and to insert the catheter in the proper way to introduce fluids. SIMETRI"s strategy for Phase I consists of the following steps. 1. Conduct research into appropriate materials and training methods. 2. Construct and… more
Abstract:Accelerator magnets that are currently being used in high-energy physics experiments are limited to a maximum magnetic field of about 20 T because superconductivity in the low- temperature superconductors (LTS) from which the magnets are constructed breaks down at higher fields.… more
Abstract:… work is to make formic acid from a carbon dioxide feedstock, at a cost less than antibiotics or other alternatives and take advantage of the fact that formic acid is generally recognized as safe for human consumption. Key advantages of the work include: 1) Carbon … more
Abstract:… Phase I project, a Software Integration Toolkit was designed, and an implementation of that tool kit developed and distributed as the Component Object Manager. The approach is to separate the multiphysics capabilities from the underlying software integration constructs, and… more
Abstract:Existing high current negative ion sources have unacceptably short lifetimes. In this Phase II project, a long lifetime, high reliability H- ion source capable of delivering current greater than 10 mA will be constructed, built, and tested. Feasibility was proven and… more
Abstract:… deployable telescopes that can travel to the world-wide locations where USA military assets operate and can benefit from the immediate response of the simpler SSA systems offered by this technology. The Potential Commercial Applications of this project extend to the … more
Abstract:… the first time, the low-noise characteristics of highly coherent master oscillators and high-power heterodyning. In simple terms, the approach combines high-power emitters with very low RIN characteristics, without resorting to high-resonance cavity construction. Specifically… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.