Abstract:… field sensors. Availability of six booms, configured into three orthogonal dipoles and 3 isolated double probes, is assumed. The TIS scans from 0.1 - 30MHz and specifies the wave polarization (O/X) and the echo angles-of-arrival for ionospheric skymap construction. Heritage… more
Abstract:The U. S. Navy is seeking novel survival rafts for Navy pilots that may have to ditch at sea. The technology currently utilized have inflated gas compartments, generally carbon dioxide, that provide the necessary buoyant forces to keep the raft and its pilot… more
Abstract:… sophisticated simulation to measurements of novel anode designs, validated by the similar comparison using the LAPPD baseline RF anode stripline design. Models of these anodes and the neighboring micro-channel plate structures and front-end coupling have been constructed in a… more
Abstract:… density, uniform emission
1 & quot;x1 & quot; field emission x-ray source. These electrons will be accelerated directly into a tungsten anode to generate the x-rays. These sources will serve as the building blocks of the irradiator system to be constructed and tested… more
Abstract:… Applications and Other Benefits: This project is an enabling technology for many X-ray FEL applications. The Dechirper implementation will enhance capabilities and save significant costs to multiple X-ray FEL projects, presently in planning stage or under construction. In… more
Abstract:Concrete is widely used in light water reactor (LWR) constructions as building foundation and support, shielding material and for radiation containment. The importance of concrete in providing protection to LWR structures are found in the containment… more
Abstract:… unique capability to be completely regenerated to original emission specifications in situ after undergoing operational degradation from laser and ion impact damage. During Phase I research, a high-vacuum test chamber for field emission investigations will be constructed. … more
Abstract:… will allow trainers and trainees to edit the database to reflect what they see on the ground. We will place special emphasis on simplifying building creation and editing, since source data typically only contains the building outline with no interior or construction material… more
Abstract:…adside EFP detection and discrimination by exploiting advanced radar processing and model-based and statistical features extracted from forward-looking vehicle-mounted sensors. EFP improvised explosive devices are armor piercing shape charges typically constructed from open… more
Abstract:… This technology will directly benefit any business or government agency requiring and accurate low cost means of monitoring soil moisture content. The target market segments include agriculture, non-food horticulture, groundwater management and remediation, construction, civil… more
Abstract:Body armor used today is an achievement of modern science, constructed of high tensile strength, manmade fibers and ultra hard, impervious ceramics. As impressive as this armor is, however, one of the most critical areas of armor testing methodology has remained largely… more
Abstract:… to demonstrate the feasibility of the approach by conducting gain measurements in an amplifier module and performing model simulations. We also propose to complete a preliminary design of the laser system that will be constructed, tested,… more
Abstract:…xperiments at an environmental reaction chamber to demonstrate the instruments potential for exploring the role of amines in the formation and growth of atmospheric aerosols, development of custom data analysis software routines, and designing the prototype to be constructed in… more
Abstract:…ional spark plug will be able to initiate the ignition at fuel-air ratios that are impossible to ignite without the optical augmentation. We will take advantage of the recently rapid development in commercial high-power LEDs in the ultra-violet (UV) range and construct… more
Abstract:There is a need for extremely lightweight low power instrumentation for real-time measurement of isotopic variants of carbon dioxide (CO2) in ambient air, suitable for use on un-manned aerial vehicles, to allow better quantification of sources and sinks of… more
Abstract:This project will develop high performance sealing plugs for use in deep borehole disposal of nuclear waste and commercial wells. The technology provides a high strength, high corrosion resistant well sealing material superior to conventional cements.
Abstract:…em behavior in complex subsurface environments. A cloud based predictive assimilation framework (PAF) is being developed which will provide timely and actionable information on current and future subsurface site behavior to stakeholders. This software is being constructed such… more
Abstract:In what follows, we propose a rather unique way to both design and construct new and certifiable composite material NDI standard calibration blocks that can be used by Air Force NDI technicians to both calibrate their existing NDI equipment and also qualify new and innovative… more
Abstract:…red for switchgrass engineering and characterization because plants need to grow to maturity and at least two cycles are required to show that the desired traits are reproducible. Demand for low lignin switchgrass will significantly increase in the next few years. Construction… more
Abstract:…ease in cargo capacity provides the MTVR to be outfitted with the MAS up armor protection minimizing impacts to vehicle performance. One obvious approach to reducing wheel assembly weight is to change materials used to make wheel components from its current steel construction to… more
Abstract:… full metallic structure of the aircraft; which includes shadowing, RF blockage, and mutual coupling. Additionally, real (scaled) antenna patterns will be measured to verify full 360 degree azimuth coverage of the individual sub-arrays. We propose constructing a 1:10 scale… more
Abstract:ABSTRACT: In our Phase I SBIR work to date, we constructed an implosion system using carefully-designed components and geometries that reproducibly reacts nearly 100% of the JP10 in the test cell. Using ALE3D we have also been able to qualitatively describe the major… more
Abstract:… already developed a method of transferring CVD-grown graphene sheets to an insulating substrate, and a novel device processing method to fabricate the pc-GIM-Sensor array. The micro-fabrication process is easily integrated into standard commercial semiconductor construction… more
Abstract:…ential to reduce electric energy consumed by lighting from 694TWh in 2010 to 375TWh in 2030. Overcoming the materials and manufacturing cost barriers in order to accelerate adoption therefore represents a significant potential opportunity for the United States. Construction… more
Abstract:…ng of plasmas is limited to relatively short record lengths and is very expensive. Portions of the tradeoff space where slightly reduced spatial resolution allows gains in record length and reduced costs are poorly explored. HyperV Technologies Corp. proposes to construct a 1000… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.