Abstract:… applications. Finally, GXI/Chambers will investigate the feasibility of changing/enhancing the hygroscopic characteristics. The materials developed in this program will be extremely hygroscopic and will be capable of"growing"in size when dispersed into… more
Abstract:…. Based on the prevalence and economic disparity of the disease, an affordable, over-the-counter (OTC), widely-distributed solution to plaque removal is needed. In Phase I, Agile Sciences identified five lead anti-biofilm molecules that are effective at dispersing oral… more
Abstract:A device is proposed that can track the electrical charge dispersion that is created when hyper velocity impact (HVI) occurs between two entities with a closing velocity greater than 1 km per second. This same device can measure the time of arrival of the charge wave front at… more
Abstract:… burned striations when they are fried as chips. Zebra Chip results in a severe reduction in the productivity of a field, reduced storage life, and rejection of the crop by the processing industry.The results and information acquired from this project will be dispersed to key… more
Abstract:…, stable, low cost substrates, reproducibility of the enhancement and selectivity are all challenges that need to be overcome before commercialization can be sucessful. The type of structure developed in this project where SERS active nanoparticles are dispersed on the… more
Abstract:… instrumented-Hot Isostatic Pressing (HIP) to develop a new generation of cost-efficient, low density and high strength composite materials. In the proposed concept we will use mechanical alloying (MA) to prepare Mg-based alloys and strengthen them by dispersing hard… more
Abstract:ABSTRACT: The main objective of this project is to design metamaterial-based MEM phase shifters, and to enable their application in phased-array radar and communications systems. A compact, low-loss, low-power-consumption, and non-dispersive Ka-band 4-bit phase shifter is… more
Abstract:… safety reports will be generated. Pre-clinical biological comparability studies and preclinical toxicity data on the API and precursor, will be combined with the human phase 1 data and made available to the SNM Clinical trial Networkand be made available to widely dispersed… more
Abstract:… for structural durability. Since carbon nanotubes (CNTs) have exceptionally high tensile strength, they can be used as a functional additive to enhance the mechanical properties of PMCs in these critical areas. However, there are known issues with dispersing and… more
Abstract:… due to their high strength to weight ratios. Multi-functional self-healing FRCs will advance the state of the art in Air Force applications that either currently use FRCs, or will use FRCs in the future. The multi-functionality, as introduced through dispersed and… more
Abstract:… of UAVs make them vulnerable to inclement weather, especially conditions favorable for ice formation. In Phase I, we propose to demonstrate the anti-icing capability of a superhydrophobic nanocomposite coating consisting of an organic-inorganic hybrid binder with a dispersion… more
Abstract:… in both long term and short term time scale. NP Photonics specializes in highly doped, high gain per unit length specialty fibers. This glass and fiber waveguide technology allows for tailoring the optical gain, nonlinear response, and group-velocity dispersion of the… more
Abstract:… to take advantage of high field concentration in the narrow slots. Band engineered slot PCW slows down the light propagation, and thus increases the light-EO polymer intraction over its optical bandwidth, while maintaining a constant group index of ~22 (low dispersion). Low … more
Abstract:… fuels will be developed. A dedicated reactor will be designed and built, and silicon and niobium coatings will be applied to depleted uranium (or DU-Mo) powders to investigate differences in nucleation and growth of the metal coatings on uranium materials. Dispersion fuels will… more
Abstract:… atmospheric turbulence. Previous and on-going theories, statistics, and empirical data will be evaluated to arrive at an optimal Sensor design concept. That Sensor may exploit the superior resolution and performance inherent in the Radio-Hydro-Physics'Dispersed… more
Abstract:This proposal addresses the need for newer and safer technologies to reduce human injuries or death during the use of non-lethal force in rooms, prison cells, ocean vessels or other enclosed areas to disperse people. In enclosed areas, modern riot control agents (RCAs) cannot… more
Abstract:… an accurate simulation of both sonobuoy data content and geolocation in order to maintain peak crew proficiency. Unfortunately, existing systems can generate and emit the necessary field of 64 sonobuoy signal simulations, but without the geographic dispersion of a real… more
Abstract:…hat occurs depending on the chemical bonding state of the fluoresced atoms. STAR Cryoelectronics proposes to develop the necessary processes to fabricate improved TES detectors that match this performance and integrate these detectors into the company’s energy dispersive… more
Abstract:… internal deodorant, for bismuth exposure. The preclinical development will consist of 4 specific aims. First, to fine tune analytical methods and controls, develop a cGMP synthesis and prepare clinical trial material. Second, to develop a formulation to optimize dispersion to… more
Abstract:…, and equipment that the shade is expected to cover. The proposed work is to develop a next generation multifunctional shade material with enhanced durability and other advantageous attributes. The proposed shade material consists of plasmonic nanowires dispersed in a… more
Abstract:… its explosive welding technology and experience to fabricate multi- layered, multi-material divertor target plates for fusion energy systems. Tungsten and molybdenum alloys are some of the most promising materials for plasma facing components (PFCs). Oxide dispersion… more
Abstract:… both the aircraft and their sensor payloads have significantly improved warfighter situational awareness (SA). A key capability required by warfighters, particularly in today"s asymmetric conflicts, is detection, identification, and tracking of widely dispersed… more
Abstract:… source/sink. The goal is to photonics to drastically increasing the transmission bandwidth available to high-performance ASICs. In the area of high-speed data transmission, the limitations of copper as a transmission media related to the absorption and dispersion of the… more
Abstract:…aces. The doping type and concentration will be optimized for either down-conversion or up-conversion. Antenna-emitter architecture will be shown to have optimal conversion efficiency. A ligand coating will be developed which allows the nanoparticles to be dispersed in high… more
Abstract:… in a model of PDA. The third aim is to carry out technology transfer to a contract commercial manufacturer and initiate scale- up of Indomethacin-PC production, with the goal of yielding a prototype parenteral formulation that is suitable for stability, dispersibility,… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.