Abstract:… wear characteristics. A better understanding of materials results in more efficient use of those materials: more effective materials usage in automobile manufacture, more capable semiconductor devices for the IT revolution, and more efficient catalysts for fuel … more
Abstract:During Phase 1 API Engineering LLC demonstrated feasibility of an oxygen source for UUV solid oxide fuel cell power systems using an aqueous chlorate solution for its oxygen storage composition. Twenty subscale breadboard laboratory decomposition tests plus… more
Abstract:There is worldwide interest in the commercialization of energy efficient, environmentally friendly, hydrogen fuel cell powered vehicles and devices. One of the key challenges in transitioning fuel cell technology to the… more
Abstract:… & apos; the carbon in the fuel, the demand for petroleum can be reduced and our dependence on foreign oil limited. Syngas is also used to make liquid fuels, alcohols and other chemicals that can be reformed to make commercial products, e.g., plastics. High-temperature fuel… more
Abstract:…iezoelectric materials to harvest mechanical vibration energy 4) Rectifier-antenna (rectenna) systems to harvest electromagnetic energy Energy Storage: 1) Small, high-energy density batteries 2) Small, high-energy density capacitors 3) Novel miniature fuel … more
Abstract:This Small Business Innovation Research Phase I project aims to develop high performance anion exchange membranes for alkaline and low-temperature fuel cell applications based on a unique polymer-polymer hybrid scheme. The hybrid of these two polymers is… more
Abstract:This Small Business Innovation Research (SBIR) Phase II proposal to the Department of Defense plans to demonstrate a design of 500 kW modular contaminant resistant high power density fuel cell power system using logistic fuel reformate as the fuel. Tread
Abstract:Aurora Flight Sciences and Protonex Technology Corporation propose a research effort into a Combined Airframe and Power system for Extended Range (or"CAPER") power system for air-launched Small Unmanned Aircraft Systems (SUAS). The CAPER system is unique in that a … more
Abstract:…. In lithium-ion batteries, the electrodes are made of materials such as graphite, while in a lithium-metal battery, the anode is made up entirely of lithium metal, and the surrounding air can act as the cathode. Lithium-metal batteries approach the energy density of fuel… more
Abstract:… power Stirling engines for beneficial use of low temperature waste heat and renewable heat sources to target commercial and industrial buildings. In particular, the input heat (fuel) target is the abundance of low temperature waste heat (100-300C) rejected from fuel … more
Abstract:… systems for use in commercial, military, and general aviation vehicles. The testbed aircraft will allow various electrical propulsion system technologies to be tested to determine performance, reliability, safety, and cost. These include various battery, fuel … more
Abstract:… 3) investigate the use of a conducting polymer to increase bubble pressure.
To produce a polymer-based CWRM, an advanced pore modification technique will be used to enhance polymer acceptability of the conductive particles. The program will culminate with fuel … more
Abstract:ElectroChem proposes to develop oxidation resistant, electrically conductive, hydrophilic coatings in PEM fuel cells and in PEM electrolyzers. The use of hydrophilic coatings can improve the transport of the water within the cells resulting in higher… more
Abstract:Efficient utilization of our nations fossil and renewable energy sources is a top priority to secure a sustainable energy future. Solid Oxide Fuel Cell (SOFC) based power systems represent an emerging technology that have the potential to produce clean… more
Abstract:… reformers, by gasification or as a refining or chemical system off-gas. All of these production systems require purification and compression steps and current systems often use substantial energy to operate and are costly. Hydrogen is also produced by FuelCell Energys… more
Abstract:… and more on unmanned vehicles (unmanned undersea vehicles UUVs and unmanned air vehicles UAVs) to carry out numerous missions. However, the transit distance for many of these missions is often well limited by the energy storage capacity of their power systems. Fuel … more
Abstract:…at Pump (EHP) is a transformational technology that: 1) is a high reliability, long life time solid state device, 2) operates on a modified Rankine cycle to provide higher COP than current solid state technologies, and 3) works on well known principles of heat pipes, fuel … more
Abstract:… is heat. We propose the use of the tremendous abundance of waste heat that occurs during hypersonic flight to produce electric power using a solid state heat engine. The Engine, using the compression and expansion of gas through electrochemical cells (similar to fuel … more
Abstract:…, Inc. proposes to develop the PowerCube, an integrated power, propulsion, and pointing solution for CubeSats. The PowerCube combines three innovative components: a high-power deployable solar array able to provide up to 100W peak power to the CubeSat, a regenerative fuel … more
Abstract:…, working at a lunar base or traveling to Mars. For long-duration human missions, drinking water can come from a variety of sources including treated humidity condensate, urine, hygiene water or makeup sources (e.g., water brought up from the ground or obtained through fuel… more
Abstract:Implementation of new technologies for soldier survivability often requires lightweight and reliable power sources. Direct-Methanol Fuel Cells (DMFCs) are attractive both in military and consumer electronics applications where their energy density, power… more
Abstract:The proposed work will evaluate a new class of non-precious metal anode catalysts for Direct Ethylene Glycol Fuel Cells (DEGFC) in practical fuel cell hardware. The influence of catalyst composition and morphology on… more
Abstract:Global Technology Connection, Inc., in collaboration with academic partners, Georgia Tech"s Center for Innovative Battery and Fuel Cell Technologies, Penn State University, and industrial partner Eagle Picher propose to create a physics-based modeling… more
Abstract:… alkalization will form anion exchange membranes with high IEC, high conductivity but low swelling, good chemical resistance against strong acids and bases and good mechanical strength. They will be used as AEMs in direct sodium borohydride/hydrogen peroxide fuel … more
Abstract:…panies are facing ever increasing pressure to reduce the level of emissions and fuel consumption from their operations because of the environmental impacts and costs. An efficient battery electric power system that has an extended range through integration with a fuel … more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.