Abstract:… in elevation allows continuous illumination of the ground from directly below the aircraft to 110 NM on the horizon, all while maintaining more than the required gain. No elevation scan is required. This allows for an extremely light weight and low cost gimbal that only… more
Abstract:… volume of less than 1U cubesat volume (6cm x 10cm x 10cm) and<0.5kg. The solar array design is a unique solution of deployable folding substrates, laser welding, proprietary pultruded carbon rods, all deployed using simple clock springs, and mounted on a gimbaled… more
Abstract:…requency band(s) while simultaneously being completely transparent in another band(s). This property can be exploited to create antenna designs which allow multiple antennas to share the same aperture. Prior antenna based FSS solutions involve the use of gimbaled fixed beam… more
Abstract:…nt graphics processing unit (GPU) to a field programmable gated array (FPGA)-based system. The algorithm improvement is necessary to both take advantage of FPGA-specific processing and to make the overall system operate in parallel with the UAS's main ISR gimbal. The… more
Abstract:… stability, a larger flight envelope, and greater maneuverability to the SUAVs conducting SUAV-related missions, viz. urban ISR and lethal engagement. Ideal platforms would be smaller UAVs with severe weight and volumetric limitations, those not capable of carrying gimbaled… more
Abstract:…ogies, LLC (BT) and The University of Texas at Austin Center for Electromechanics (CEM) successfully achieved all Phase I objectives and developed concept designs for controlled Canfield Joint Systems (CJS) for numerous applications that currently employ two-axis gimbal systems,… more
Abstract:ABSTRACT: High resolution 3D LADAR imaging over a wide field of view usually requires mechanical scanning the sensor"s field of view using gimbals, or a high peak power laser pulse and a very large focal plane array at the imaging plane. Both techniques add considerable… more
Abstract:…, the amount of data they produce overwhelms the current ability to offload that data based on the meager performance of ground station terminals. A high gain antenna supporting Ka-Band sensor data offload and Command and Control Uplink is required. Gimbaled reflectors… more
Abstract:… Intelligence, Surveillance and Reconnaissance missions that are facilitated by 3D imaging. The compact and efficient design of the illuminator"s laser transmitter will enable integration onto a variety of platforms ranging from compact stabilized gimbals on small… more
Abstract:… ACE can enhance the intelligence, surveillance, and reconnaissance (ISR) capability of the larger RPAs, and the forward looking, WFOV ACE can enhance the guidance, navigation and control of seekers and munitions. The wide angle capability eliminates the need for heavy … more
Abstract:… datalink that allows for high bandwidth (>2Gb/s) multi-mode, missile sensor data to be passed to the sensor data processor to minimize the use of cabling. This removes the issues caused by the cabling, such as integration time, cable volume and weight and gimbal sticktion.… more
Abstract:…on Measurement (ARM) program continues to expand its footprint in the North Slope of Alaska (NSA) and has identified a need for the increased use of robotic aircraft to meet the growing need for environmental observing in the Arctic. A small sized ( & lt; 1.25 kg) … more
Abstract:… depends upon depositing nanoparticles in specific spectral mixtures and at precise target locations, increased precision is required for this application, especially at the long standoff ranges required for covert delivery. Toward this end, fixed- and gimbal-mounted… more
Abstract:ABSTRACT: To address the Air Force need for a wide-field-of-view seeker combining multiwaveband infrared imaging and semiactive laser (SAL) guidance in a gimbal-free concept, Physical Optics Corporation (POC) proposes to develop a new ultrawide-field-of-view Seeker for Small… more
Abstract:… to radio frequency interference, and low probability of interception and detection. The biggest disadvantage of lasercom, however, is its requirement of point-to-point and line-of-the-sight configuration between optical transceivers. Pointing and tracking via gimbal… more
Abstract:… and small thruster size based on low-cost semiconductor manufacturing. The thruster architecture is fully scalable and thrust can be electronically regulated. With deflection circuitry, thrust can also be electronically vectored to eliminate mechanical gimbals and all… more
Abstract:… will enable coordination and cooperation between multiple sensor assets to best leverage availability, capability, and coverage of diverse ISR sensors and platforms. Target handoff from one wide area motion imagery (WAMI) sensor to another WAMI sensor or gimbaled full… more
Abstract:…or system during a Phase II contract. The primary objectives are to: 1) Precisely point and hold a laser spot on a target; 2) Safely control the laser beam to prevent collateral damage by providing real-time feedback of the laser spot location; and 3) Package a gimbal payload in… more
Abstract:ABSTRACT: Air and space gimbaled Infrared, multi-spectral, and hyperspectral sensor systems require cryogenic cooling to operate. Current cryogenic systems are inefficient, costly, subject to vibrations, are typically the high-maintenance portion of a sensor system, and take up… more
Abstract:The proposed innovation is for enhanced sensor performance and high resolution imaging for Long Wave InfraRed (LWIR) and Medium Wave IR (MWIR) camera systems used in aerial imaging applications through integration with KeyW's advanced EO/IR Imaging eGimbal?(IeG) system. … more
Abstract:… SWaP goals, with size at 2.8X2.4X0.20 in (for three channels), weight of 100gm, and power of<2W. These factors provide the SWaP required to fit in a tactical missile with a seven inch diameter. The transmitter will be capable of being mounted on the gimbaled sensor… more
Abstract:…use of such a system. From our expertise in UAV imaging systems we are uniquely qualified to provide the unmanned vehicle community with much needed capabilities which will be possible with this system. These include support for needed unmanned vehicle camera and/or gimbal… more
Abstract:… are fast, highly compact, and require negligible power consumption. Mirrors are scalable from<1mm to several millimeters for different laser designs and wavelengths, and can be separately coated with high-reflectivity coatings before assembly with actuators. Gimbal-less… more
Abstract:… Demonstration (JCTD) that has mission capabilities in surf zone and shallow water mine countermeasures, optical anti-submarine warefare (ASW), maritime search and rescue, and land-based counter terrorism among others. The system is housed in a 15 inch Wescam gimbal and is… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.