Abstract:…, and the limited availability of such detectors in large quantities at reasonable cost. Therefore, there is a strong need to develop an alternate wide band gap semiconductor material for more rapid advancement in gamma ray detection technology. We propose an innovative wide… more
Abstract:… of the IED injury. The specialized care, rehabilitation, and reconstructive surgery required for these injuries results in significant degradation of quality of life for facial burn victims. The aim of this proposed project is to conduct a proof of concept for an innovative… more
Abstract:…rves are being depleted. The new technology being developed herein is required to recover helium from vast natural gas reservoirs containing concentrations too low for current economic recovery. This program thus promotes the Department of Energy interest in promoting … more
Abstract:ABSTRACT: Tactical weapons have followed an evolutionary pattern of progressive capability that allows them to be ever more lethal against specific targets, but the resulting systems are highly optimized,"stove-piped"solutions to a very specific set of requirements. Modern warfare… more
Abstract:… feasibility and specify a new system designed for the relay task, as well as provide a complete solution. Modularity in our system design allows for the integration of new technologies as they become available. With sponsor support we have additional innovative… more
Abstract:… real unmanned systems. UxPRESS is designed to allow existing and new perception algorithms to be evaluated and rapidly tuned for a variety of heterogeneous unmanned platforms (ground and ultimately air), resulting in greater re-use of contractor-developed innovation, reduced… more
Abstract:ABSTRACT: This Small Business Innovation Research Phase II project seeks to further develop an AR coating on high efficiency PV device surface that can enable a reflection loss<3% over the wavelength range from 300 nm to 1800 nm. The proposed effort will optimize the coating… more
Abstract:… Reactors to improve safety in the event of accidents in the reactor or spent fuel pools. Within this context, the DOE is calling for advanced technologies for the fabrication and characterization of nuclear fuel. Specifically, the DOE is inviting (1) new innovative LWR fuel… more
Abstract:NAVAIR SBIR Topic N101-041, Development of High Temperature Survivability Coating Materials with Innovative Application Processes, was initiated to address performance shortfalls in coating systems operating in moderate-high temperature environments. The objective was to develop… more
Abstract:The proposal seeks to significantly automate the process of producing parts requiring multi-axis milling of sculpted surfaces as required by the Navy for hydro-shapes such as propellers. Harnessing recent university research involving the application of graphical processing units as inexpensive… more
Abstract:… of its DE weapons against specific enemy targets and to reduce the susceptibility of friendly systems to foe DE attacks. We propose to address the Navy requirement for a flexible and efficient HPM test capability by leveraging our prior Navy-funded work and innovative concepts… more
Abstract:…ccelerator at Lawrence Berkeley National Lab as well as a dual-nozzle jet for the longer pulsed Texas Petawatt laser at the Univ. of Texas Austin. Later we will scale these nozzles to higher density as required for CO2 laser interactions. The challenge and innovation in this… more
Abstract:…per coated onto stainless steel that could meet the conflicting requirements of the RF coupler: stainless steel block heat on the outside while copper conducts RF power efficiently on the inside. In this project we will improve upon our coating solution by using an innovative… more
Abstract:Acellent Technologies is developing a system for the US Navy that incorporates innovative ways to detect and track corrosion, measure clamping force and bolt preload in bolted joints typical of aircraft structures. Many of the corrosion inspection methods currently employed in… more
Abstract:… operators and intelligence analysts, enabling fewer operators to manage larger numbers of vehicles. These solutions could also support the rapidly growing commercial UAV market, making more advanced capabilities available to non-expert users, and offering new and … more
Abstract:This purpose of this project is to develop an advanced Transparent Conductive Oxide (TCO) coating and protective hardcoating for use on the dome of passive infrared (IR) guided missiles. The coatings will be deposited using innovative energetic deposition techniques producing… more
Abstract:The purpose of this project is to demonstrate the effectiveness of an innovative coating solution to provide a substantial improvement in the gear lifetime of rotorcraft power transmission systems following loss-of-lubrication. The high temperature compatible, self-lubricating… more
Abstract:ABSTRACT: This is a nine-month SBIR Phase I project titled"Weapons Effects FRMs for Contact or Embedded detonations in Fixed Targets."The stated objective of this solicitation topic is to develop innovative High-Fidelity Physics-Based (HFPB) Fast-Running Models (FRMs)… more
Abstract:… the systematic capsule maintenance following a launch and eliminate launch debris. ADA Technologies is proposing to develop and test a fast-actuating, completely reusable capsule closure meeting the key Navy requirements. The selected design utilizes an innovative dome… more
Abstract:… capability is needed to help warfighters make decisions on where to fight, and once committed, make the best choice of sensor system to use (including distribution and settings) and provide feedback to improve coordination of future sorties based on in situ data. Innovative… more
Abstract:An innovative, high destruction efficiency, and low fuel consumption VOCs incinerator is proposed to reduce VOCs from condensate tank, or other low heat value waste gas emissions from different air pollution sources. The proposed technology use highly effective heat… more
Abstract:ABSTRACT: This Small Business Innovation Research (SBIR) Phase I project proposes to develop and demonstrate a test apparatus for determining the minimum hot surface ignition (HSI) temperature of flammable liquids. Flammable liquids leaking onto hot surfaces, such as those in… more
Abstract:This Small Business Innovation Research (SBIR) Phase I effort will demonstrate the feasibility of a fail-safe reusable Forward Closure System (FCS) for use in underwater launch tubes. The proposed FCS will be reusable, fail-safe, scalable, capable of withstanding pressures, and… more
Abstract:This Phase I SBIR program will develop innovative engineered aluminum powders for AM technology to replace current die cast process. This powder will solve the problems associated with SLS/SLM/DMLS processes such as reflectivity, oxide formation, fluidity, solidification. Phase… more
Abstract:An innovative system for deploying and retrieving towed bodies from a small surface platform is proposed which builds on previous work in the field. The Deploy and Retrieval System (DRS) employs a semi-active approach to accommodate high sea state conditions. Active sensing of… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.