Abstract:…, FTIR, XPS, and AFM spectroscopic techniques. Our permanent, ultra-low coefficient of friction, durable, extreme-pressure resistant lubricant is offered as a cost-effective surface pre-treatment that will synergistically enhance the hydrodynamic performance of liquid lubricants… more
Abstract:… medications to pediatric populations. Specifically, in the absence of pediatric-specific products - formulations that are both palatable (to ensure compliance) and titratable (to meet the weight/surface area- appropriate dosage) - providers either utilize adult-approved liquid… more
Abstract:… operation of the device, the nanoDESI platform to be built will be made of two halves. One half will be integrated with an interface mounted on the inlet of mass spectrometer, while another half will be mounted on a XY stage holding the sample under analysis. Liquid… more
Abstract:… for better dental protection. In the US alone, every year more than 1 million dental injuries occur, resulting in medical costs of roughly $500 million. The proposed technology will involve novel manufacturing methods to incorporate energy absorbing solid/liquid suspensions… more
Abstract:The Persistent Anchorless Active Sonar Craft (PAASC) system is a unique approach to Naval ASW that achieves 90-day mission endurance carrying a state-of-the-art active sonar (DWADS) in a deep water operating area. The PAASC achieves this unparalleled endurance via an efficient balance between wave-… more
Abstract:… States to maximize production efficiency, enhance meat quality, and minimize meat and milk cost of production. Transition from high-fiber to high-concentrate diets is challenging and put the animals at risk for acidosis. Megastarter LLC is commercializing a liquid… more
Abstract:… seals. All- metal couplers such as bellows with stainless steel pressure jackets, seem like good options except that when the salt cools in a confined space, it forms crystalline solids; upon melting, excessively large pressures can be generated by the expanding liquid… more
Abstract:ABSTRACT: This Small Business Innovation Research (SBIR) Phase I project proposes to develop and demonstrate a test apparatus for determining the minimum hot surface ignition (HSI) temperature of flammable liquids. Flammable liquids leaking onto hot… more
Abstract:ABSTRACT: Advanced Cooling Technologies, Inc. (ACT) proposes to develop a Liquid Desiccant (LD) based Air Washer (AW) by utilizing Vortical-flow, Direct-contact Mass Exchanger (VDMX) technology recently developed by ACT. This system is based on principles similar to… more
Abstract:…a single phase pumped loop to perform the function of variable heat rejection while still closely controlling the loop setpoint temperature. This technology development effort has three main objectives that build on mature LHP technology: optimization of the liquid/LHP heat… more
Abstract:… System (CMS) that both limited a shelter's indoor relative humidity to less than 50% while capturing airborne chloride particles. However, these functions, particularly humidity control, can be expensive to implement with conventional dehumidifiers. Liquid… more
Abstract:At present, detectors of fast neutrons use liquid scintillators liquid scintillators can be dangerous to handle due to their low flash points and bulkiness, and the readout of the liquid scintillator by large PMTs limits the available position resolution and… more
Abstract:… bandwidth. In addition, a robust theoretical understanding of the relationship between cathode growth procedures and electronic band- structure, scattering, and morphology will allow improvements in cathodes for other regions of the spectrum, including in the UV (liquid-Argon,… more
Abstract:… the thinwalled graphite ligaments. Gains in ligament graphitic quality is reflected in increased electrical and thermal conductivity. Sandwich structures with this advanced foam will be made and thermally tested. Active cooling of the structures with both air and liquid will… more
Abstract:Icing is one of the most significant hazards to aircraft. A sizing supercooled liquid water content (SSLWC) sonde is being developed to meet a directly related need for in-situ measurements of both total supercooled liquid water content and droplet size distribution. This data… more
Abstract:ABSTRACT: Cloud ice water content and cloud liquid water content strongly affect radiative transfer of solar energy to the atmosphere, and hence need to be taken into account in any modeling of the weather and climate. This proposal advances the poorly-known area of sensitivity… more
Abstract:… temperature. There are no such well-accepted characterization protocols for hot surface ignition temperature measurements. We propose the development of a small scale hot surface ignition apparatus that accounts for various coupled processes such as liquid injection,… more
Abstract:… and evaluation, and for verification and validation of combustion modeling codes. Flame emission spectra in the ultraviolet and visible portions of the spectrum can be used to determine species concentrations, fuel-air ratio, and instantaneous heat release in liquid… more
Abstract:… be used on a number of different aircraft, will be reliable, robust, require minimal maintenance, and will be small and inexpensive. The Microwave Radiometer for Aviation Safety (MRAS) will provide data on air temperature and water vapor profiles as well as cloud liquid… more
Abstract:ABSTRACT: The proposed effort will perform a feasibility study on developing a multispectral scene projector from 0.4µm to 5µm, using liquid crystal on Silicon (LCoS) spatial light modulators (SLMs). BNS has successfully developed scene projector technology using this… more
Abstract:ABSTRACT: Busek Co. Inc. and Massachusetts Institute of Technology (MIT) propose to explore the physical limits of ionic liquid propulsion via development of new theory to explain effects of close packing emission density and to predict performance limits. The research is… more
Abstract:The availability of an effective liquid-propellant mitigation system will enhance the safety of liquid hypergolic propulsion systems while deployed, during depot storage, and during transport. The system can be modified to respond to leaks or spills during tank loading… more
Abstract:…hat "PowerFelt?" was significantly better than other power producing films and competitive or better than ceramics that cannot conform to the shape of the heat and vibration source. The material was successfully field tested at the Stennis Space Center at their liquid… more
Abstract:This project aims to develop solid-state hybrid energy storage devices with nanostructured electrode materials combined with an ionic liquid-based electrolyte. The main objective of Phase II is design and fabrication of a hybrid energy storage system,
Abstract:Modern combustion systems such as liquid rocket engines and gas turbines are characterized by high operating pressures and temperatures due to increased power-density. Thermal radiation has significant impact on both heat fluxes at the wall and on physical phenomena controlling… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.