Abstract:… cell venting which results. As part of Phase I and II SBIR research activities, MaxPower Inc. has developed a high power cell based on a lithium/V2O5 primary chemistry. As a solid state cathode, the vanadium pentoxide chemistry offers a safer alternative to pressurized liquid… more
Abstract:… in gasoline engines by 25 percent and diesel engines by 40 percent, advanced tools for research on fuel injection dynamics are needed. Existing techniques for investigating pre- combustion spray and vaporization dynamics in an engine cylinder do not allow both liquid and fuel… more
Abstract:ABSTRACT: Microcosm, in cooperation with Aerojet Rocketdyne and Sierra Engineering, proposes to develop a LOX/kerosene swirl injector with a body of Inconel 625 deposited onto a copper faceplate. The post-processing includes stress relief and heat treatment. The copper alloy selection plus the… more
Abstract:…ce and other resources required for the bearing are reduced. Both roller and ball bearings will be investigated and analyzed. The work will generate a more rigorous bearing system life analysis and an alternate bearing design eliminating grease and other type liquid lubricants.… more
Abstract:… 10 MeV superconducting electron linac with 10 kW average beam
power. This high-intensity source, evolved from linacs developed by Niowave for x-ray sterilization and free electron lasers, produces an electron beam with a 100% duty cycle. When equipped with a thin liquid… more
Abstract:… photon flux density. A continuous-wave (CW) superconducting electron linac opens up the potential for machines with very high density photon flux, but requires a bremsstrahlung converter which can withstand the higher power of the electron beam (~ 100 kW). A liquid metal… more
Abstract:… applications. The ARCTES will rely on an initially-frozen cryogen to absorb heat from the passing helium gas through a heat exchanger device. As the working cryogen continues to absorb heat, it will warm to its melting point, melt, and then continue to warm as a liquid and… more
Abstract:There is an urgent need for an instrument that can quickly measure the concentration of Plutonium and other Actinides mixed with Uranium in liquids containing dissolved spent fuel rods for process control applications. Parallax Research, Inc. proposes to develop an x-ray… more
Abstract:… showed that YBCO tape could be wound on the pole of a dipole magnet without serious degradation. The experimental part of the present Phase I will develop techniques to wind the midplane turns of a YBCO tape dipole, and the coil will be tested at 77 K in liquid nitrogen to… more
Abstract:To address the Air Force"s need for a non-mechanical beam-steering device in a FLIR(r)/LADAR system, Physical Optics Corporation (POC) proposes to develop a new Shared Aperture Polarization Grating-Controlled Enhanced Steering (SHAPES) system. This system utilizes liquid… more
Abstract:Physical Sciences Inc. (PSI) proposes to utilize an innovative LWIR hyperspectral technology coupled with advanced data processing algorithms for non-contact, standoff detection of liquid/solid contaminants on surfaces. The technology will address the US Army"s need for… more
Abstract:… as a preferred means of mitigating CO2 emissions from fossil-fueled plants. For understanding sequestration processes and verifying GCS success at its intended function of retaining CO2 within reservoir bounds, it is essential to track and monitor the fate of liquid CO2 stored… more
Abstract:ABSTRACT: Physical Sciences Inc. proposes to develop a nonflammable ionic liquid based electrolyte for use in high performance secondary lithium ion cells. The electrolyte will be formed using a mixture of ILs and conventional battery solvents. Phase I testing will… more
Abstract:… in viscosity measurement. This research leverages Progeny"s previous research and experience in applying ultrasonic methods of detection, classification, and sizing of microscopic contaminants (bubbles, solid particles, biologics, water, oil) in flowing liquids. At… more
Abstract:The Navy has identified tactical applications for 3000-nm-wavelength-region lasers, which feature very high efficiency in coupling laser energy to water. This is the result of the most intense infrared absorption band for liquid water, which has a broad peak centered at 2900 nm,… more
Abstract:… automatically. During the coating application process and the period when the coating is left on the vehicle, chemical agent will not be spread to other surfaces nor will it be able to evaporate through the coating. The coating process will not aerosolize the liquid agent on… more
Abstract:SA Photonics is pleased to propose the development of the SENTRY hyperspectral situational awareness system for the detection of liquid chemical agents in the asymmetric terrorist warfare scenario. SA Photonics will be teaming with world renowned experts from its university… more
Abstract:The objective of Phase II effort described in this proposal is further development and testing of technology prototype LINCARBOHEAT-53 for effective treatment of Pyrowear 53 steel alloy used in manufacturing of high-aspect-ratio (HAR) helicopter gears (5:1 and greater) with deep internal splines. In… more
Abstract:…s of Direct Digital Manufacturing services. Their DMLS department specializes in aerospace components and produces parts pushing the technology"s limits. Solid Concepts Phase 1 goal will assess the feasibility of implementing DMLS to manufacture MonelK500 liquid rocket… more
Abstract:ABSTRACT: The primary objective of this research effort is to develop a next-generation X-ray tomography and surface topography imaging system for four-dimensional (4-D) characterization of liquid mass distributions within dense fuel sprays. This will be accomplished through… more
Abstract:Surface microtexturing can be used for enhanced heat transfer capabilities at liquid-solid or gas-solid interfaces to improve convection, decrease boundary layer size, change liquid flow properties, and affect the general fluid adhesion (wetting) on the material surface. Recent… more
Abstract:… cycle management is now becoming feasible as computer software has evolved sufficiently. For Air Force propulsion systems, the operating conditions involve high temperatures and pressures, especially for large scale (e.g., 10X) scramjets and high pressure liquid rockets. At… more
Abstract:Liner wear in spherical bearings used in fixed wing and rotor craft can be significantly accelerated by liquid and solid contamination. Contamination is particularly problematic with oscillating loads. The proposed solution will prevent contamination of plain airframe bearings… more
Abstract:It is proposed that SPI gels be used to provide a multi-layered protective barrier for active and plugged carbon sequestration injection wells to ensure long term CO2 storage. SPI gels are patent pending, liquid silicate based gel systems that are near water viscosity until… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.