Abstract:… center outages are now attributed to human errors occurring at layer 0. The AutoPHY service will for the first time automate the management of the millions of physical interconnects in a typical network, at a scale and cost previously impossible. Unique robotic fiber … more
Abstract:… readout rates & #8805;2000 frames/second in a windowed mode. Specifically improved for low power on-ROIC analog-to-digital conversion of 14-bits or more will be utilized. During Phase I BFE will define other imager components (HOT MWIR detector array, MWIR WFOV … more
Abstract:…unctionality in which a spectrally dispersed and focused beam can be amplitude modulated to provide a beam with a detailed target specific spectral signature to a second spatial SLM which generates the scene. The main thrust of the study will be to determine a way to optically… more
Abstract:… aerial vehicle (UAV) laser radar units. Development of small, compact, low-power laser radars on small dynamic platforms is a difficult problem because of the pointing accuracy, open and closed loop scanning rates, angle coverage, and aperture size needed for the optical… more
Abstract:… of these products to end users, particularly when full-waveform recovery is desired. During the Phase I effort, Bridger demonstrated that their 3D imaging system architecture was ideally suited for seamless integration of high-speed free-space optical (FSO)… more
Abstract:…ts can be combined to form an incoherent or coherent tomographic reconstruction of the atmospheric turbulence. The use of high range resolution FMCW chirped ladar allows point targets to be identified and isolated by their range even when individual targets cannot be optically… more
Abstract:ABSTRACT: There is a critical need for optical imagers that can achieve both extremely high resolution and a compact form factor for rapid and accurate target identification and intelligence, surveillance and reconnaissance from airborne platforms. Under this effort, Bridger… more
Abstract:… positions on the platform. Future planned capabilities, like the Advanced Tactical Data Link (ATDL), will require a significant increase in IDR, which typically requires an expensive, time-consuming retrofit of the legacy platform to install networking cables or fibers.… more
Abstract:… industry. The total Nylon demand in 2010 was 6.5 MMTPA growing at 4-6% in the past four years. It is imperative to develop alternative options for textile materials, automotive and other industrial uses that are currently being catered by nylon. Such new fibers can be… more
Abstract:ABSTRACT: A Comprehensive assessment and rigorous documentation of a customized fiber optic coupled laser system as the ignition system within the Aerodynamic and Propulsion Test Unit (APTU) Combustion Air Heater (CAH) at AEDC is proposed. CFDRC will… more
Abstract:… promise for underwater platforms. However, the underwater environment and hull inspection task present several challenges to these techniques, such as poor visibility and limited scene structure. We propose Precise Underwater Localization Using Sonar and Electro-Optics (PULSE)… more
Abstract:The US Navy is in the process of phasing out conventional optical submarine periscopes in favor of digital sensor masts that transmit video (and other sensor data) to the bridge electronically. Sensor masts can host multiple sensor modalities including both electro-optic (EO)… more
Abstract:To address the Army"s need for a non-invasive, compact, robust system to monitor the oxidative status of military personnel, ChromoLogic (CL) proposed and demonstrated during Phase I a OCular Oxidative Stress Monitor (OCOSMO) system based on non-invasive optical… more
Abstract:…t outer mold line (OML) urethane and epoxy integrity assessment to address and identify premature failures, ChromoLogic (CL) proposed and demonstrated during Phase I a Coating Integrity Monitoring by Spectroscopic Analysis (CIMOSA) system based on nondestructive optical… more
Abstract:ChromoLogic LLC is developing Quantitative Optical Traceability Technology ("QuanTEK") to meet the need for a secure, rapid, and cost effective authentication of electronic components. QuanTEK consists of optical enrollment and authentication subsystems that allow the… more
Abstract:… transpiration plates with controlled levels of porosity, suitable for high-speed/high-temperature missile applications. Process will entail subjecting polymer composites to high-temperature pyrolysis process converting it to a porous ceramic matrix and locking the fiber… more
Abstract:… for hydrocarbon fuels including JP-8 by coupling the existing CSE vitiated kinetics model with plasma-flame chemistry developed in the current work. In parallel with the model development, CSE will work with Purdue University to develop and apply a new optical diagnostic… more
Abstract:… systems that will enable a driving range of greater than 300 miles while meeting packaging, cost, safety, and performance requirements. State-of-the-art hydrogen storage vessels that meet these requirements are currently very expensive to manufacture due to high carbon fiber… more
Abstract:CDI is developing a compact OIRU that combines our field-proven stabilization technology with an innovative application of a commercially available gyro. Phase II Base delivers two compact OIRU prototypes in a 2"x2"x2"package which provides a guide beam with residual jitter of less… more
Abstract:… Phase II proposal in collaboration with The Johns Hopkins University Applied Physics Laboratory (JHU/APL), Spectral Sciences Inc. and Torch Technologies. Capabilities from each collaborator are being combined toward the ability to perform accurate, fast-running electro-… more
Abstract:… science. Only recently has this material been considered as a viable ablative due to its high temperature stability and excellent composite mechanical properties especially due to the liquid crystalline nature of the polymer, which allows a matching of CTE between fiber… more
Abstract:… Urbana-Champaign (UIUC), North Carolina State University (NCSU), and Lockheed Martin, propose to use a revolutionary microvascular technology developed at UIUC to build a composite counter-flow heat exchanger. This technology relies on 3D weaving of sacrificial fibers into a… more
Abstract:… capable of realizing the full potential performance afforded by the battle manager having multiple sensors. dBWager is a multi-sensor measurement correlation algorithm that provides highly accurate state vector estimates and provides the correlation of electro-optic/infrared… more
Abstract:In Phase 2, Diffraction LTD, in collaboration with Optics 1, proposes to develop a variable magnification clip-on thermal imager (VM-COTI) that will be compatible with a variety of weapon and head mounted optical systems ranging from 1X night vision goggles (NVGs) to 5X ACOG… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.