Abstract:… to obtain improved Mg alloys is through the development of new alloys and/or Mg-based composite materials that are enabled through the use of vapor phase processing routes. For example, high quality Mg matrix composites can be created by coating individual reinforcing fibers… more
Abstract:We will manufacture high current handling balanced photodiodes in a rugged 8-pin Kovar package having the following characteristics: (a) Small Package with height of 5 mm, and volume of 2.5 cubic cm; (b) Use 7 micron core, loose tube, SM fiber for tight bend radius; (c)… more
Abstract:…mechanical filters to eliminate signals above 2 kHz from accelerometers. Dominca"s patented layered-media approach will be used to develop filters for high-shock accelerometers used in explosive and impact events. Layered-media theory has been applied successfully in … more
Abstract:…One of the most promising developments that will aid in bringing the subject research technology to broad commercial use is the increase in portable computing devices that now contain built-in GNSS and subsystems such as GPS, in addition to accelerometers, gyroscopes, WiFi, and… more
Abstract:… Energy Systems, Inc. proposes an improved transparent patch that would offer an Indium-free highly conductive coating with enhanced adhesion performance relative to existing methods. The patch utilizes the Eclipse Transparent Electrical Conductor (EclipseTEC), an optically… more
Abstract:… On the epitaxial level, non-uniform device performance results from the variations of chemical composition and thickness of the individual InGaN quantum well layers. Being extremely thin, the individual quantum well layers remain beyond the resolution of the standard optical… more
Abstract:The proposed effort is to develop and package a new ultra-compact, wideband, dual-output electro-optic LiNbO3 modulator for RF/photonic link applications on air platforms. The modulator will be capable of extremely high optical power handling (>500mW), and have dual outputs… more
Abstract:… filter media will be functionalized using ion exchange chemistry which is known to react with salt ions. The media will be characterized for its filtration performance, resistance to airflow, and dust holding capacity. The performance will be tailored by fiber diameter… more
Abstract:This proposal addresses the problem of PCSS/laser trigger integration using a single monolithic laser diode array, thus simplifying the entire optical delivery network necessary for efficient operation of PCSSs. Phase 1 effort will focus on (1) overall feasibility study of… more
Abstract:This Phase 2 proposal seeks to reach TRL 6 for the single camera passive optical ranging technology by upgrading it and evaluating it against real data from a submarine photonics mast. The single camera algorithm and concept of operations will be modified to account for wave… more
Abstract:…. The proposed encapsulated cell technology has been shown to provide significant improvements in cell lifetime, operational stability, with decreased maintenance requirements, and is easily integrated into a variety of sensing based platforms allowing for optical and/or… more
Abstract:… desired temperature levels near critical instruments. In addition, the miniaturization and ruggedization that will occur as part of this effort will advance Luna"s distributed sensing technology, both temperature sensing and strain sensing, bringing distributed fiber… more
Abstract:… over a FOV of up to 5 x 5 degrees, and is compatible with a rodamap for integration in typical EO/IR sensor pod. Detailed study and simulation models in Phase 1 were developed for laser beam-steering and imaging (receive-path) taking into account realistic optical… more
Abstract:…, Inc. (TUI) proposes to develop a system for towing micro Magnetic Anomaly Detection (MAD) sensors from unmanned and manned rotary-wing aerial vehicles such as the Fire Scout MQ-8C VTUAV. In prior efforts, TUI successfully developed a prototype lightweight winch, fiber-optic… more
Abstract:In this program, Freedom Photonics proposed to build a novel, compact, high performance module for coherent population trapping applications. Our solution is based on close integration of photonics with electronics.
Abstract:In this program, we see a unique and immense opportunity to utilize our novel, semiconductor based technology to develop a low insertion loss, low drive voltage, high bandwidth, manufacturable, rugged and uncooled Indium Phosphide semiconductor based dual output modulator device and module, which… more
Abstract:… technologies that have proven successful in detecting, diagnosing and recommending corrective action for electronic and electro-mechanical systems in DoD and commercial applications. Representative data and failure scenarios from the Electrostatically Supported Gyroscopic… more
Abstract:The Laser-Aided Recovery System (LARS) offers Precision Ship-Relative Navigation (PS-RN) utilizing the electro-optic spectrum for day/night and all-weather operation. This is particularly valuable in EMCON environments as well as complete independence from GPS and RF… more
Abstract:ABSTRACT: General Nano is partnering with Top 3 prime to develop next generation composite systems for air vehicles. The core technology involves integrating lightweight, conductive CNT non-woven sheet materials into aerospace qualified prepreg. The program builds from initial Air Force SBIR… more
Abstract:Frequency stabilized lasers are essential subsystems in many applications. Most importantly, they are used as flywheel oscillators in optical atomic clocks, as well as in many sensing and measurement systems, and some examples are down oil well sensing, laser radar and ranging… more
Abstract:High Precision Devices, Inc. (HPD) proposes to continue and complete development of the 25 kW Flowing Water Optical Power Meter for Laser Measurements begun under a Phase I SBIR award. In the proposed Phase II work described, HPD will complete mechanical and electrical… more
Abstract:…. In digital visualization applications such as near-eye advanced helmet mounted systems (HMS), three-dimensional (3D) and other projection designs, the flat image must be transformed into a curved image wavefront representation for projection to the eye. The optics to… more
Abstract:… denial, smuggling interdiction). BENEFIT: Anticipated Impact and Outcome: The primary mission of the SIRII sensor is the detection of missile plumes from orbit. For that purpose, the Phase I study has shown that application of the principles of optical… more
Abstract:In this Phase II SBIR program, Illinois Applied Research Associates will design, manufacture, and test a 1.06 um optimized Linear Mode (LM) avalanche photodiode (APD) array. The array will be electrically and optically characterized and will be tested for environmental and… more
Abstract:… dBc/Hz. We will use InGaAlAs system instead of the InGaAsP system as the laser active layer, and will design the optimum laser structure to reduce the laser threshold current and RIN, and to push the relaxation oscillation peak over 40 GHz. We will use optical feedback or… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.