Abstract:…. Navy through enhanced maintenance scheduling and reduction in unnecessary inspections / overhauls. Embedded sensors provide monitoring capabilities for data acquisition, analysis and transmission when sufficient power is available through hardwired power, battery, or energy… more
Abstract:There are numerous regions across modern aircraft that necessitate advanced corrosion solutions in order to protect and maintain their readiness. One such application is the numerous cathodic fasteners that are galvanically coupled to anodic structural materials, like… more
Abstract:…aday"s approach centers on developing a drop-in replacement using a robust electrolyte and controlling the stripping process through use of sophisticated waveforms engineered to remove the chrome coating while controlling formation of the dissolved chromium ion species.… more
Abstract:…erformance assessment of radio frequency systems in the existing and planned fusion devices; in the design, operation and performance assessment of the industrial radio frequency plasma devices; in the design, operation and performance assessment of the electron cyclotron ion… more
Abstract:…or from the MQ-8B. Recent advances in micro MAD sensor technologies as well as new high-strength optical fiber cables can enable further reductions in the SWaP for a towing system. The lower energy requirements of the micro-MAD sensors enable rechargeable batteries to power the… more
Abstract:…s have modeled a solution to this problem that reduces the bandwidth by >50. We propose to fabricate a prototype of the NIST device by developing an innovative fabrication method for a Bragg grating with a pi/2 phase shift over the SPDC periodically poled waveguide in lithium… more
Abstract:… by (optical) clocks scales with the line width of the clock transition and the readout noise of the state of the atoms. Quantum projection noise is the fundamental limitation of the readout noise, and projection noise has limited the performance of microwave and single-ion… more
Abstract:…, wideband (2 MHz to 2 GHz) receiver prototype based on SQUID array technology. Our SQUID array designs are based on highly linear bi-SQUID and SQUID cells arranged into a 2-dimensional (2D) array. The 2D arrays are fabricated using high-temperature superconductor Ion… more
Abstract:… the surface chemistry of fastener materials using the innovative Plasma Electrolytic Diffusion (PED) process. Together with OSU, IBC will perform surface alloying of corrosion resistant steel (CRES) materials in order to reduce galvanic potential and impede cathodic current… more
Abstract:… conditions of the Northern Border pose specific technical challenges to securing the border. In this proposal, we detail a novel mesh networked RF sensor, ARGUS-HS based on IAIs current ARGUS. ARGUS-HS will have 1-3 years run time on a single D-cell battery, and provide… more
Abstract:… transceiver circuits, pulse-biased amplification schemes and SoC based power management will reduce not only IFF Transponder form-factor, but also provide improved efficiency and greatly reduced quiescent device heat dissipation. This makes our solution ideal for battery… more
Abstract:Building on success in Phase I, this proposal focuses on the theoretical analysis, system level optimization, manufacturability, TRL progression and prototypic demonstration of IntraMicron's Enhanced Battery Pack (IEBP). IEBP facilitates rapid cooling of
Abstract:… of materials at the nano- and meso-scale has become possible with transmission and scanning transmission electron microscopes. Its importance has extended to a wide class of nanomaterialssuch as hydrogen fuel cells, solar cells, industrial catalysts, new battery materials… more
Abstract:…in objective of the current proposal is to create an optical isolator for 3-5 um that could be used in laser applications. The technical approach is to develop a vitreous material that is transparent in mid IR spectral region and can accept high concentration of ions that… more
Abstract:To address the need for corrosion inhibiting surface modifications to limit or control cathodic current density on structural materials, Luminit, LLC, and the Advanced Physics Laboratory at Johns Hopkins University propose to develop a new Corrosion Resistant Enhanced Surface… more
Abstract:Lithium-ion batteries with improved safety and that maintain high specific energies, high powers, and wide temperature ranges are needed for the Joint Strike Fighter (JSF) and other platforms. Current lithium-ion batteries contain a highly flammable… more
Abstract:Currently, the United States Military encounters many scenarios where soldiers must enter hazardous areas, while maintaining isolation from contaminants such as chemical and biological agents as well as hazardous material exposure. This requires that the soldiers"respiratory tract be isolated… more
Abstract:ABSTRACT: The Air Force regularly uses eddy current and ultrasonic NDI equipment which can be configured with a wide range of battery chemistries. Many of these battery chemistries, which include toxic heavy metals, are detrimental to the environment and can… more
Abstract:… after Phase II project execution. The innovative design for the PMS-IT-SOFC fuel cell makes use of a highly conductive porous metal anode manufactured using MER"s powder metallurgy technology, a highly ionic conductor electrolyte, and a very efficient cathode… more
Abstract:The Navy has established a need to update the battery capability of the present Active Source sonobuoy used in Anti Submarine Warfare(ASW) systems. The technology which is currently deployed achieves up to 14, 10 second pulses providing 2400 watts of power at 75 volts. The… more
Abstract:…n duration has increased the draw on existing energy sources and novel solutions are required to meet the demands of the next generation of buoys and UAV"s. Power sources commonly used in Unmanned Ariel Vehicle(UAV) fleets are comprised of rechargeable lithium polymer … more
Abstract:MaxPower Inc. is proposing the development of an energy dense lithium reserve battery for air-to-surface missile applications based on their missile operational environment validated Lithium/Vanadium Pentoxide technology. The basis of the effort is the… more
Abstract:MaxPower incorporated is dedicated to the continued development of a high power battery utilizing a novel cell design coupled with a rate capable cathode formulation based upon a primary Lithium/Vanadium Pentoxide chemistry. Originally developed as a safe… more
Abstract:Li/CFx primary batteries are considered to be a superior choice for military applications that require long life, light weight and very low self-discharge. The high cost of current carbon monofluoride materials, however, adds significantly to the total cost of the battery.… more
Abstract:… based on using dry ice or a propane burner adding significant logistical challenges in military service areas. To address these problems, Reactive Innovations has shown a method that produces carbon dioxide where the replaceable consumables are only water and a battery.… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.