Abstract:… high-power demands using cost-effective materials. To address this need, ADA Technologies, Inc. (ADA) proposes to partner with PneumatiCoat Technologies, a leader in scalable atomic layer deposition (ALD) coatings, to develop an EDLC with high surface area nanocomposite… more
Abstract:Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. … more
Abstract:Chemical warfare agents, such as nerve and mustard agents, pose serious threats to our soldiers and civilians. An efficient barrier coating which can sequester and deactivate chemical agents is urgently needed. We propose a broad spectrum responsive nanocomposite gel coating… more
Abstract:Navy Submarines utilize a large number of undersea electrical connections to systems located outside the pressure hull (sonar, radar, communications masts etc). Long service life of undersea connectors is critical since maintainance and replacement is difficult and costly. Protection of undersea… more
Abstract:… technology focus areas. As will be described in more detail later in this proposal, field assisted sintering technology can consolidate materials in as short an active process time as 2 minutes! FAST has been demonstrated for metals, glasses, ceramics, and nano-composite… more
Abstract:… for DoD personnel. During the Phase I research period a portable, reusable, light and efficient method to accelerate the moisture removal from difficult to dry pieces of clothing such as combat boots will be developed. The drying device is based on a nanocomposite paper that… more
Abstract:… NanoSonic would primarily develop Metal Rubber modified Kevlar based composites as a super lightweight cable shielding alternative to heavy metal over-braiding, metal foils and other parasitically attached shielding structures. The innovative super lightweight nanocomposites… more
Abstract:… EM hardening technique to carbon nanotube and metasurfaces to further develop materials with both tunable and multiple controlled constitutive properties (permeability, permittivity, and conductivity). NanoSonic offers uniquely EM tailored TR nanocomposites herein as a… more
Abstract:…mal managements of high power electronic components. The proposed TIMs is composed of highly conductive fibers to improve the bulk thermal conductivity and highly conductive bonding layer to reduce the total thermal contact resistance of TIMs. BENEFIT: Nanocomposite TIMs find… more
Abstract:ABSTRACT: The development of robust, ultra-light weight, low-cost electrically tunable nanocomposites with the ability to efficiently absorb the electromagnetic radiation in strategic bands in the RF and microwave region is anticipated to provide valuable armor for electronic… more
Abstract:The DOD and commercial markets have a distinct need for low cost anatomically accurate, complex synthetic human tissue in order to improve training and improve surgical precision. In this project a novel multiple material print-head is developed using a 3D printer capable of depositing a wide range… more
Abstract:… stabilized nanoparticles eventually as a free membrane or coated onto to a fabric. The highly moisture breathable, tear resistant elastomeric SMP liner releases agents when torn or cut to form an instantaneous flexible but tough rubbery barrier nanocomposite thus … more
Abstract:… next generation of rare earth free permanent magnets with high magnetic performance, thermal stability and mechanical strength. The effort will focus on the development of new Mn-based magnets under two forms: (i) new ternary Mn-Bi-X single phase and (ii) nanocomposites of the… more
Abstract:… at the lower limits of this temperature range, and technologies that come close typically suffer from instability in the upper temperature range. To address this need, ADA Technologies, Inc. (ADA) proposes to combine high capacitance activated carbon nanocomposite… more
Abstract:… prevented their widespread adoption. To address these needs, ADA Technologies, Inc., in collaboration with the University of Colorado, propose the development of a novel, durable, high performance and highly scalable thermoelectric material based on polymer nanocomposites. … more
Abstract:… approach enables both optical index control, as well as mechanical and thermal durability. The precise control of RIR-MAPLE based film deposition is perfectly suited for GRIN-AR formation since it will allow for the discrete deposition of multi-component hybrid nanocomposites… more
Abstract:This project is to develop and demonstrate a novel class of high-temperature high-energy-density nanocomposites permanent magnets with low rare-earth content, whicah can be processed with a low cost method and can be cost-effectively used for high performance permanent magnet… more
Abstract:… detectors and detector arrays, we propose to develop a new class of high performance printed mid-IR detectors and detector arrays with integrated OTFT-based drive electronics. The approach is closely coupled with recent progress in solution processed nanocomposite-based… more
Abstract:… technology makes use of a patented technique that yields nanoparticles typically 5"10 nm in size. It has been demonstrated to overcome the processing issues related to agglomeration and mixing, giving a monodisperse, high purity, size-similar, polymeric nanocomposite… more
Abstract:… that they are impractical to work with. One route to improving ESD insensitivity is to embed the nanoparticles in a polymeric matrix, which insulates the particles from accidental discharge. However, significant challenges exist with traditional polymeric nanocomposite… more
Abstract:… This approach however, further reduces porosity of the electrodes making them even less permeable to electrolyte. Handling thin and brittle electrode disks adds significant manufacturing costs. Giner, Inc. proposes to address these problems by using a fibrous nano-composite… more
Abstract:…, hydrophobic, impact and abrasion resistant coating on the landing ski/skids is highly desired to ensure the ski/skid equipped aircraft can continue to meet their unique mission requirement. Resodyn Corporation proposes a material solution in the form a nanocomposite… more
Abstract:… are a primary component in currently used EMI shields. Consequently, the shielding materials are heavy, and not optimally suitable for use in avionic electronic equipment. In the Phase I program, we propose to demonstrate the feasibility of a novel polymer/CNT nanocomposite… more
Abstract:… accumulation on UAVs. The specialized design and construction of UAVs make them vulnerable to inclement weather, especially conditions favorable for ice formation. In Phase I, we propose to demonstrate the anti-icing capability of a superhydrophobic nanocomposite coating… more
Abstract:The objective of this SBIR program is to adapt NanoSonic"s high temperature, ballistic resistant HybridSilTM nanocomposites for use as next generation potting materials with exceptional thermal durability, g-force resilience, and negligible variation (<10 %) in dynamic… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.