Abstract:… pulses to drive these systems has to be addressed. Described herein, is a research and development program aimed at addressing the specific challenges of excitation of HPM sources through a combination theoretical and experimental effort aimed at advancing the … more
Abstract:…fic enemy targets and to reduce the susceptibility of friendly systems to foe DE attacks. We propose to address the Navy requirement for a flexible and efficient HPM test capability by leveraging our prior Navy-funded work and innovative concepts to develop a solid-state… more
Abstract:…f ships decks that have extremely tight overhead and lateral clearances. The design approach reflects the need for minimizing the number of personnel required to safely operate and manage the MMHD including missions where the LCS may be operating in elevated sea state conditions… more
Abstract:…n active motion compensation platform supported by a self-contained air cushion system. The Phase II study will evaluate the ability of the'Ramp Motion Control Platform'(RMCP) to support and control the LMSR stern ramp through a range of elevated sea state conditions… more
Abstract:The Persistent Anchorless Active Sonar Craft (PAASC) system is a unique approach to Naval ASW that achieves 90-day mission endurance carrying a state-of-the-art active sonar (DWADS) in a deep water operating area. The PAASC achieves this unparalleled endurance via an efficient… more
Abstract:…, and can be made by a roll-to-roll process on flexible substrates. Also, due to their superior flexibility and rollability, OPV require a minimum of stowage space and can be inflated or unrolled for deployment. In this project, Solarmer Energy, in partnership with University of… more
Abstract:… spectrometer disperses an incident x-ray beam in such a way as to translate each x-ray energy into a corresponding position on the resulting beam. Thus, in these spectrometers energy resolution is dependent on the position resolution of the detectors used. Current state of the… more
Abstract:… and ease integration. Phase IIB is designed to complete the transition and position the technology for immediate commercial deployment. Further advancements will be made in terms of manufacturability, component-level qualification, system testing, and a more universally… more
Abstract:… of a rigid gangway which is deployed from a vessel and which makes hard contact with the tower. With these systems, the need to maneuver the vessel in close proximity to the tower and make a hard contact renders the operation difficult in higher sea states. Therefore a… more
Abstract:The Navy Ohio Replacement Ballistic Missile Submarine Program is a major endeavor aiming at designing and building a new class of 12 ballistic missile submarines (SSBNs) to replace the current force of SSBNs. Current Ohio-Class SSBNs are armed with Trident ballistic missiles or… more
Abstract:…ere is no moving part or catalyst involved that significantly reduces the capital and operational cost. The Phase I work will focus on demonstrating the feasibility of the proposed concept. A bench scale incinerator will be designed and fabricated. Steady and unsteady state… more
Abstract:The continuous push towards higher photon energies and higher imaging resolution has brought current state- of-theart X-ray focusing zone plates to a limit of 20 nm resolution at & lt;10 keV photon energies. Zone plates for focusing with same or better resolution at energies… more
Abstract:… systems and has the ability to address additional"digital only"features. Specific features to be added will be addressed in the investigation, but might include on-cartridge encryption and fast zeroize feature. VPI"s subcontractor, The Utah State … more
Abstract:… harness the body"s own chemistry to help detect the presence of CWA exposure in the field. CWAs are toxic because of their direct and indirect impact on biological processes in the human body. Agave BioSystems, in collaboration with Dr. Carl Batt of Cornell University… more
Abstract:…s to develop a basic module that can be used to build larger detector systems with multiple position sensing elements. We will further develop newly discovered plastic scintillators that have neutron versus gamma pulse shape discrimination and couple them to solid state… more
Abstract:…r the quantitative evaluation of the geometric and compositional characteristics of nuclear fuel burn-up distribution, visualization of cracks and void formations, fuel location determination, pellet-clad and pellet-pellet gaps identification, and to understand the state of… more
Abstract:…ond is a wide band gap semiconductor that can operate at elevated temperatures and under high radiation conditions. Diamond also has high mobility of both electrons and holes enabling high count rate detection. The Phase I work plan is to fabricate diamond detectors from … more
Abstract:…rrective actions. This high level layer is then complemented by a neuro-cognitive troubleshooting scheme that accomplishes the detection and identification of faults. A distinctive characteristic of the proposed system is the performing of INS troubleshooting by new … more
Abstract:…, the fundamental design differences between SMRs and traditional power reactors may not allow for identical I & amp;C sensors; especially for advanced SMRs. Given a proposed timetable of less than ten years before completion of the first light water SMR in the United … more
Abstract:…vide new test methods and objective guidance for the nuclear industry in the two areas mentioned above and will develop a cognitive radio system for in-plant EMC and coexistence testing. The goal of this project will be accomplished through hands-on laboratory work at AMS … more
Abstract:… to DOE and other synchrotron light sources for ~50X higher spatial resolution synchrotron infrared microspectroscopy. By dramatically reducing the cost of infrared nanospectroscopy (currently affordable only to multi-billion dollar companies and top-tier universities),… more
Abstract:…s Small Business Innovation Research Phase I project aims to develop high-performance ion-exchange membranes for PEM electrolyzers based on a ternary material system. Such membranes shall have lower hydrogen permeability and higher proton conductivity than the state-of-the-art… more
Abstract:…ery charger for the BB-XX90 battery which has been shown to exceed the performance of comparable products drastically (30%-50% faster charging) due to advanced high speed MPPT and digital control algorithms. This new technology will integrate Apecor's proven state… more
Abstract:A programmable universal pulsed power source capable of delivering voltages up to 50 kV, current up to 1 kA, pulse durations of 100"s of ns and repetition rates of 10"s of kHz is proposed to meet near term high powered RF research and development efforts. The concept… more
Abstract:… strips, before stamping. TreadStone plans to optimize the composition of the coating materials, develop the larger scale fabrication technology and demonstrate the technology in full size, automotive short stack with our team partner Hawaii Natural Energy Institute, University… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.