Abstract:… the diffraction of protein crystals. We have completely met our Phase I goals. We f
abricated a ZnTe-based phosphor, ZnTe:O, that is as bright (and could potentially be brighter) than our ZnSe phosphor. We have also established fabrication procedures that seal the ZnTe:O… more
Abstract:… and provide advance warning of insulation degradation. In addition to the application to the nuclear power industry, the sensors should be applicable to degradation monitoring of virtually any polymeric material, opening possibilities for use in wire and cable systems, seals… more
Abstract:…. Very few methods can provide the mobile-phase pumping in a closed-loop that is required for practical application of circular LC. The MHD-based circular LC system envisioned will be small, portable, and designed for laboratory as well as field use. The sealed LC chip will… more
Abstract:… a suite of labs-on-a-chip that can be used to establish the metabolic health of an individual in real-time from a finger-prick sample of blood. Each disposable chip will contain all reagents necessary to run the assay and all waste will be stored on the chip. These sealed,… more
Abstract:The project objective is to develop grounded and counter-rotating bearing compartment seals that satisfy the requirements of advanced engines that include 5400 hour operational life, 450 ft/s rubbing velocity for grounded seals and 1200 ft/s for counter rotating seals in a 900o… more
Abstract:An advanced degaussing system utilizing high temperature superconducting (HTS) cables is being developed by the the Navy for application to new ship systems. The proposed system reduces the system weight and installed cost over degaussing system designs that use copper cables. HTS cables operate in… more
Abstract:… for thermal power generation by utilities. In Phase I, new elements made from conductive graphite materials performed beyond their thermal engineering and reliability expectations, demonstrating that they are ideal for exhaust heat recovery. Issues with bonding, sealing,… more
Abstract:…using finite element analysis), a MEMS based coil fabrication approach (allowing for higher coil packing density than conventional approaches and utilizing a novel approach to convert 2-D fabrication structures into 3-D arrays), and the working fluid interface and seal (to be… more
Abstract:…ution of 30 5m based on Phase I study; 2) Development of the compact CNT field emission 10 5m micro-focus x-ray source meeting key Phase II targets; 3) Design and assembly of the compact electronic c
ontrol system for the x-ray source of Aim 2; 4) Construction of a sealed and… more
Abstract:… into a single unit, costly interconnect ducting and fittings, along with associated support structure and insulation, will not be required. In Phase I, a single pass ceramic monolith was manufactured and tested to determine its heat transfer performance, plenum sealing… more
Abstract:The US Navy and other Department of Defense agencies are facing an urgent need for new and improved radome materials for advanced missile systems. High temperature sealants on radome structures of advanced missile systems is a critical need, since ingress of moisture during missile storage can… more
Abstract:Novel techniques for jet noise mitigation and plume IR attenuation techniques will be evaluated by CRAFT Tech and NCPA for application to the F/A-18 E/F and the Joint Strike Fighter (JSF) aircrafts. Two concepts, featuring corrugated nozzle seals and lobed ejector … more
Abstract:… treatment of eye disease and demonstrate the unique propertie
s of a laser cured collagen adhesive to repair ophthalmic tissue with superior strength and stability. Millions of ophthalmic procedures are performed annually, most incorporating sutures to close and seal wounds.… more
Abstract:… corrosion, thermal protection, impact resistance and solid lubrication properties. In the Phase II program IBC will further optimize the coating for improved performance, demonstrate the repeatability of the coating process, and develop local adapters to form a sealed local… more
Abstract:…. The design will benefit from parts that are interchangeable with Stirling engine components designed for low cost mass production. The MCC concept developed during Phase I integrates long-life, high reliability, maintenance-free flexure bearing, and clearance seal… more
Abstract:…aving demonstrated the economic and technical feasibility of the Juniper door system concept in Phase I, Phase II will yield fully functional prototypes that will prove out 1) the weight savings achieved, 2) the improved performance resulting from Juniper's enhanced sealing,… more
Abstract:… life support (up to 4 weeks) in infants and small children. Our goal will be to extend technology associated with a small-scale paracorporeal MagLev centrifugal blood pump, to create a clinical product for infants and small children. Uniquely, this p
ump has no seals,… more
Abstract:… to develop a compact, lightweight, disposable drug infusion pump with integrated safety features. These features include direct monitoring of the fluid flow, air bubble elimination, and inline air bubble detection. Fluid delivery is achieved using a hermetically sealed,… more
Abstract:… CVI) for 2-D woven, 3-D woven, and/or non-woven muti-dimensional ceramic fiber pre-forms in JSF turbine engine CMC component applications. These CMC components include combustion liners, turbine airfoils, turbine shrouds, and exhaust nozzles of flaps and seals.… more
Abstract:… in reducing manufacturing time and cost while produc-ing the best end item parts. COI Ceramics Inc., Pratt & Whitney Inc. and the U.S. Air Force Research Laboratory have done sev-eral studies of various NDE methods for in-process inspection of S200 CMC flaps and seals for… more
Abstract:… II project we are proposing to take the LiC6/Li1.11Ni0.37Co0.18Mn0.37O2 technology to the next level by testing it for long-term deep-discharge applications as well as periodic and destructive abuse. The overall system will be developed to a light-weight, hermetically … more
Abstract:…er beam ship and 2500NM for a 40 knots 137 meter length ship. MECHMATH LLC suggests top speed improvement for these ships by combination of a special hull design and friction reduction by ventilated air cavities. The Phase II work also includes: Development of a stern seal for… more
Abstract:… solution at volumes of lt1000 nL. A Cartesian fluid handli
ng system will manipulate larger fluid volumes of gt1000 nL, such as oil and well precipitant solutions. The platform will include a plate handler and plate sealer to manipulate and seal… more
Abstract:… Phase II effort are: a) miniaturization of the application specific integrated circuit (ASIC), b. development of pulse position modulation software, c. development of a graphical user interfac
e (GUI) software, d. development of a high-fidelity pressure sensor sealed to… more
Abstract:… self-healing of an epoxy-based system can be accomplished by controlling its chemistry. The modulus of a self-healed sample was comparable to that of the control sample in the low strain region. Unlike previous approaches, our technology simultaneously closes and seals… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.