Abstract:This Small Business Innovation Research Phase I project sets out to improve the skills and knowledge of the manufacturing workforce and to maximize resources for retraining and reemploying the manufacturing workforce by means of the development of instructional and educational systems and assessment… more
Abstract:Unmanned Aerial Vehicles (UAVs) are one of the most valuable emerging technologies used to improve the survivability and lethality of our Armed Forces. Current advances in the alternative energy industry have created interest in integrating new technologies into small UAVs. This integration would… more
Abstract:Low temperature (550 C) SOFC will be developed and characterized with a combination of impedance spectroscopy and high resolution microscopy (FIB, SEM, TEM, XEDS, EELS, SAED, CBED methods). Initial focus will be on a low temperature samarium doped ceria electrolyte and low temperature cathodes to… more
Abstract:In previous research, a specialty solid-state lighting (SSL) device had been developed. A doped Polymer Light-Emitting Diode (POLED) device structure is used, which enables devices to be printed with low capital equipment and operating costs. Although the devices are efficient, thin, flexible, and… more
Abstract:This Small Business Innovation Research (SBIR) Phase-II project will analyze the limiting factors in performance and commercialization obtained through printed polymer organic light emitting diode (P-OLED) research and development as well as customer engagement. Utilizing this basis, a set of… more
Abstract:The aims and opportunities of Photo-Automatic-Linking for 3-D Facial-Imaging System(PALS-3D) are focused on innovative development, iterative evolving, and near-term fielding of modular inexpensive imaging systems that enable users to capture a person's face in three dimensions(3-D) and identify the… more
Abstract:Users of OneSAF are offered the potential to specify entity behaviors using a flowchart-based composer. However, that tool lacks utility because it is schematic instead of graphical, and does not foster intuitive understanding of temporal relationships. The goal of the proposed project is to… more
Abstract:DESCRIPTION (provided by applicant): The goals for this Phase I proposal are: 1) construction and bench testing of a novel device to dissociate tissue from donor pancreas using ultrasound for the recovery of pancreatic islet cells for transplantation, and
2) marked improvement in yields and… more
Abstract:High Velocity Oxygen Fuel (HVOF) tungsten carbide, WC-Co, WC-Co-Cr coatings have been in development for two decades for chrome replacement in aerospace applications and implemented on many components. These coatings have been limited for High Strength Steel (HSS) Landing Gear component… more
Abstract:Landing gear designs utilize forgings for structural applications, to maximize properties and minimize weight. Although this approach allows for minimal component weight and size, a forging typically has the longest logistic lead time, and is usually the most expensive manufacturing method. Many… more
Abstract:Landing gear components utilize steels with tensile strengths above 280 KSI. Components manufactured from these alloys require sacrificial protective coatings to perform successfully in service. Cadmium has been the baseline coating for such components for decades. The problems with cadmium, a… more
Abstract:Chrome plating has been utilized for Landing Gear components for over half a century and High Velocity Oxygen Fuel (HVOF) tungsten carbide WC-Co coatings are currently being utilized for chrome replacement for aerospace applications and implemented on many non-aerospace applications. Landing Gear… more
Abstract:The goal of this SBIR project is to develop next generation inorganic semiconductor based emissive microdisplays with the following merits: Much higher brightness and power efficiency (5 x) than the current filter based LCD and OLED microdisplays. Resolution and pixel density higher than 15 micron… more
Abstract:The Small Business Technology Transfer Research (STTR) Phase I project will develop metal-organic chemical vapor deposition (MOCVD) growth technology for the in-situ Er incorporation into III-nitride epilayers and device structures grown on Si substrates. Through optical characterization of Er3+… more
Abstract:The Small Business Technology Transfer Research (STTR) Phase I project will demonstrate the feasibility of developing a compressible magnetorheological (CMR) fluid. Magnetorheological fluids consist of magnetizable particles suspended in a carrier fluid. The compression of a fluid is the measured… more
Abstract:This proposal presents a Phase II SBIR project to produce prototypes of the automated high precision, low disperse rate powder disseminator for the US Army, that has been successfully designed and analyzed in the Phase I project. In the development of the sensitive detecting agent, we need to… more
Abstract:The development of an Inter-Turbine Burner (ITB) for improving the part power performance of small gas turbine engines is proposed. An Inter-Turbine Burner is a second combustor placed between the gas generator exit and the power turbine to "reheat" the engine gas stream before it enters the power… more
Abstract:Development of an advanced, innovative system in support of timely assessments of emerging
market opportunities for U.S. commodity crops is proposed. GDA will prototype a set of
automated, decision support algorithms for near-real time, analytical assessment of large
volumes of satellite derived… more
Abstract:Aethercomm will produce a power amplifier covering a 225 to 2000 MHz frequency range with an output power of 50 watts. The amplifier will be fully tested to all electrical and environmental specifications for a minature munitions environment.
Abstract:In its SBIR Phase I, Agile Systems Inc. developed concepts for new shipboard automated material handling technologies that address important opportunities to reduce crew size and generally increase logistics efficiency on Navy surface combatants-present and future-as well as on aircraft carriers and… more
Abstract:THIS IS A FAST TRACK PROPOSAL WITH SIGNIFICANT MATCHING FUNDS COMMITMENTS. The Government is deploying a growing number of radiation detectors at U.S. borders, ports of entry and other key locations, intended to assist in the detection of a potential terrorist`s nuclear explosive device or… more
Abstract:Using manufacturing techniques recently demonstrated at Aguila Technologies, we will develop an inexpensive technology and system for rapidly producing moderate-scale production quantities of re-workable flip chip assemblies with target operating rates up to 100 GHz. The approach involves using… more
Abstract:The improved surveillance of radioactive sources used in hospitals, research centers, food irradiations plants and other fully legal and sanctioned industries is paramount to interrupt the terrorism value chain. This value chain relies on stealing radioactive sources from the legitimate before… more
Abstract:The recent wave of mass casualties plaguing the public safety community showed that the incident commander s situational awareness of the first responders can be quickly and easily overwhelmed. At emergency scenes, with the overburdened first responders and unreliable communication infrastructure,… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.