Direct Adhesive Technology for Arbitrary Conductors--Advanced Magnet Laboratory, Inc., 2730 Kirby Avenue, NE, Unit #5, Palm Bay, FL 32905-3402;
Dr. Rainer D. Meinke, Principal Investigator
Mr. Mark W. Senti, Business Official
DOE Grant No. DE-FG02-97ER82312
Amount: $74… more
A Simple Process to Manufacture Grain Aligned Permanent Magnets--Advanced Materials Corporation, 700 Technology Drive, P.O. Box 2950, Pittsburgh, PA 15230-2950;
Mr. Vijay K. Chandhok, Principal Investigator
Dr. S.G. Sankar, Business Official
DOE Grant No.… more
A Novel Technique for the Enhancement of Coercivity in High Energy Permanent Magnets--Advanced Materials Corporation, 700 Technology Drive, P.O. Box 2950, Pittsburgh, PA 15219-3124; (412) 268-5649
Dr. S.G. Sankar, Principal Investigator
Dr. S.G. Sankar, Business Official
DOE Grant No.… more
Abstract:The XA2 gasoline burner is widely used by the military to meet a variety of food preparation and heating requirements in the field. Because of the trend toward an single-fuel Army vehicle fleet and away from gasoline as a general purpose fuel, a diesel/JPS fueled burner is sorely needed. A… more
Abstract:The investigators will test the feasibility of developing a prototype UV-B monitor/recording deviceworn by workers exposed to the sun, as further described by their abstract. This SBIR proposes an inUV-B exposure record keeping and sensor calibration that can be done at a low cost while improving… more
Abstract:We will develop a wireless link that will be suitable for sleep studies. Data from sensors and moniwill be telemetered from a compact unit held to the top of the patient's head with a chin strap. Thewireless link is in response to frequent complaints of sleep study patients that they are bothered… more
Abstract:The company believes that its innovative new powder metallurgy developments and long-term experience in this field can answer major needs in thermal batteries to reduce ceell thickness and provide increased energy density. They can accomplish t
Abstract:Quantitative energy dispersive spectroscopy (EDS) x-ray microanalysis provides important information regarding the distribution of elements within a biological sample. The low elemental concentrations in biological specimens require dwell times of several seconds livetime to obtain spectra with… more
Abstract:This program proposes to replace petroleum-based chemicals with formulations that are less expensive and safer to use in the environment. Critical to this goal is the incorporation of biopolymer additives require as binders for powder injection molding. Water soluble, cellulose-based polymers that… more
Abstract:The developmental mission is to anaylze, model, design, develop an d test a working prototype of a very low structureborne noise unit enclosure for COTS modules. Structureborne and airborne noise attenuation have become leading edge technology refreshments lagging behind the Military's drive to… more
Company:A and D AssayAgency/Program/Year/Phase:HHS / SBIR / 1997 / 1
Abstract:DESCRIPTION: (Adapted from applicant's abstract) The primary goal of this research is to develop a highly sensitive and specific assay for the measurement of 2 important metabolites of vitamin D, 25-hydroxy- vitamin D and 1,25 dihydroxy vitamin D, in a non-radioactive assay. Preliminary work has… more
Abstract:Self-determination is a desirable and critical outcome for students with disabilities. Self- determination is particularly important in transition planning, since it is literally the launching process for the rest of the student's life. One barrier for students with cognitive disabilities in… more
Abstract:We propose a solid-state angular based microelectromechanical systems (MEMS) technology. The rate sensor utilizes a tuning fork resonator design with control and readout electronics integrated on the dame chip as the sensor. The sensor will be designed to operate at high spin rates (300 rev/sec)… more
Abstract:We propose a conformal strain gage array to provide an improved strain measurement technology for turbomachinery and mechanical components. The array consists of MEMS sensors and electronics embedded in a flexible, compliant substrate which may be conformally applied to test components. The… more
Abstract:The Alkali Metal Thermal to Electric Converter (AMTEC) technology is ideal for auxiliary electric power supplies (AEPS) that must operate over a broad range of temperatures, fuel sources, power levels, and operational specifications. The simplicity, efficiency and modularity, as well as the high… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.