Abstract:AMBP Tech in collaboration with the ESI of SUNY UB has demonstrated the improvement of surface flashover on dielectrics by a factor of 2x utilizing laser processing techniques. Based on our extensive experimentation and characterization in Phase I we have developed a working hypothesis that unites… more
Abstract:AMBP Tech in collaboration with ITN Energy Systems will demonstrate its Excimer Laser Processing capabilities as an ideal solution to reducing the thermal budgets necessary to process high efficiency CIGS solar cells. This will allow the use of lightweight and cheaper polymer substrates, thus… more
Abstract:AMBP Tech will implement Zinc Oxide high mobility material technology it has developed specifically for flexible electronics into a direct write process onto large area polymer membranes. The implementation of this technology will form the core components of transmit/receive components of a… more
Abstract:Second generation, coated superconductor wires (YBCO material), needed for electricity transmission, have demonstrated the ability to produce 100 Amp, long-length conductors at approximately 10 times the cost of copper wires. This cost is unacceptable. In order to meet the DOE¿s cost target of… more
Abstract:The objective of this project is to investigate and demonstrate the feasibility of 4D GIS Based Virtual Reality for Moving Target Prediction. The proposed algorithms are based on the geospatial data and remotely sensed imagery analisys to provide a virtual scenario of moving targets prediction and… more
Abstract:During Phase I AGNC has investigated and proved the feasibility of an innovative configuration of Miniaturized Smart Self-calibration Electronic Pointing Device (EPD) for mortar applications. This innovative EPD configuration uses gyros and accelerometers in a new EPD implementation that produces a… more
Abstract:The objective of this project is to produce an Enhanced Wireless Wide Area Networked Precision Geolocation system for the high-performance real-time ARDEC Combat Decision Aids System (CDAS) for the Future Combat System (FCS). This Intelligent Precision geolocation system provides precision… more
Abstract:This project develops Web based distributed image analysis system processing the Moderate Resolution Imaging Spectroradiometer (MODIS) data to provide decision makers or non-specialists with high-quality, environmental scientific information and coastal predictive tools. The system provides the… more
Abstract:The objective of this project is to demonstrate an innovative Intelligent Remotely Controlled Weapon Station with automated target hand-off. The purpose of the Remotely Controlled Weapon Station is to get the gunner out of the turret where he is exposed to enemy fire and fragments, and position him… more
Abstract:The objective of this Phase I project is to demonstrate an automated on-line structural health monitoring system for aircraft structures using a combination of wireless data acquisition and fault detection filter via a sensing network for vehicle-embedded large arrays of MEMS sensors and actuators.… more
Abstract:The objective of the proposed project is to determine the feasibility and efficacy of using a two-legged, two-armed robot for inspection and EOD tasks. The project builds upon an agile two-legged platform currently under development for DARPA. The Tactical All-Terrain Biped (T/ATB) is intended to… more
Abstract:The nuclear power industry continues to depend largely on antiquated methods and hands-on maintenance for its instrumentation, for plant-aging management, and health monitoring. This project will develop on-line monitoring technology that will help establish the accuracy and reliability of nuclear… more
Abstract:The marine mammal mitigation mission planning tool (M3 PT) will allow mission planners to identify marine mammal hazard areas based on sound scientific research of marine mammal migration routes and habitats. Our unique approach will also enable the Navy to refine its knowledge of marine mammal… more
Abstract:Automatic Target Recognition (ATR) for Combat Identification (CID) represents one of the most demanding disciplines in sensor technology facing the United States Air Force today. Central to this process is the development of validated synthetic. Unfortunately, the synthetic database generation… more
Abstract:This SBIR Phase I project will develop an evidence-based approach to maximize learning for K-12 students and predict learning outcomes. We propose to analyze data at multiple levels, including individual and group assessment data, and characteristics of the student, teacher, principal, and school. … more
Abstract:DESCRIPTION (provided by applicant): The aim of the proposed research is to develop tools for the prediction of the distribution of drug compounds in the human body. There is currently no experimental high throughput screening (HTS) method for determining compound tissue distribution. A drug… more
Abstract:The U. S. Army has a need for reliable and durable in-cylinder thermal barrier coatings to reduce high power density diesel engine component structural temperatures and heat rejection. Phase I program bench testing results identified thermal barrier coating topcoat systems that reduced radiant heat… more
Abstract:The proposed muti-mode imaging system will allow a combination of X-ray Backscatter imaging (proven successful in finding IEDs in AS&E's Z Backscatter Van) and other sensor modalities, such as vapor/trace detection and video, to be mounted on a robotic platform(the iRobot R-Gator) such that the… more
Abstract:The Air Force Research Laboratory (AFRL), U.S. Air Force and agencies like the National Aeronautics and Space Administration (NASA) have a current and future need for advanced commercially available inherently rad-hard primitive cell libraries to support new designs for satellites and other… more
Abstract:The current generation of hybrid particle detectors at the International Linear Collider (ILC) falls well short of meeting the mass and resolution requirements: mass less than 0.1 radiation length/layer, resolution speed in the range of
Abstract:The many different generations of integrated circuit (IC) technologies required for new space exploration systems demand designs operate at multiple and often incompatible voltages. Extended utilization of current and development of new space exploration systems require multiple voltage levels be… more
Abstract:It is proposed to develop and implement a simulation of spacecraft rendezvous and docking guidance, navigation, and control in elliptical orbit. The foundation of the simulation will be an extension of an existing tool for optimal rendezvous and docking simulations for spacecraft in circular orbit.… more
Abstract:The individual software tools that make up the analytical capabilities for the design of entry vehicles using an aero-assist/aero-capture device have been fully developed. In fact the performance of such software against the flight data has been superb, and NASA has used the results to make… more
Abstract:In summary, the proposed Phase I work furthers our understanding of high-temperature superconducting (HTS) coils for gyrotron applications. A system trade study will be performed to minimize the overall weight of the system, while also maximizing the operating temperature, in order to minimize the… more
Abstract:Second generation (2G), High Temperature Superconductor (HTS) coated conductors are needed to modernize and expand America¿s electricity delivery system. These conductors consist of a flexible metallic substrate and a superconductor layer, separated by intermediate oxide layers. In practice,… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.