Abstract:During this program, Fiber Materials, Inc. (FMI) will develop practical methods for preparing Phenolic Impregnated Carbon Ablator (PICA) materials for joining thermal protection system segments and penetrations of the heat shield assembly. Current and future mission flight… more
Abstract:… to improve overall robustness and decrease mass. The program's goal is to extend Phenolic Impregnated Carbon Ablator (PICA) and Fiber Materials, Inc. (FMI<SUP>REG</SUP>) Integrated Composite Structure (ICS) TPS materials to a broader range of flight heat… more
Abstract:FMI currently manufactures Phenolic Impregnated Carbon Ablator (PICA) material for Thermal Protection Systems (TPS) systems, such as the Stardust Sample Return Capsule and the Mars Science Laboratory Aeroshell. FMI plans to further develop TPS in support of future sample return… more
Abstract:During this program Fiber Materials, Inc. (FMI) will develop innovative yet practical methods for preparing Phenolic Impregnated Felt (PIF) materials for thermal protection system (TPS) segments and heat shield assemblies. Future mission flight environments… more
Abstract:NASA has defined a need for higher performance ablative Thermal Protection System (TPS) materials for future exploration of our solar system's inner and outer planets than is currently available. Of particular interest are: 1) Materials with performance analogous to fully… more
Abstract:… matrix composite design with increased pressure capability with lower mass. This added capability will enable higher performance DACS designs and is applicable to other interceptor systems. In Phase I, FMI teamed with a prime contractor, will review the … more
Abstract:… improved lighting for engine diagnostics, lower operating costs for the test stand, much longer lamp life and a safer environment by reducing or eliminating lighting maintenance operations in an explosive environment.The housing will also be shock, vibration and heat resistant… more
Abstract:The innovation is an advanced Airborne Thematic Thermal InfraRed and Electro-Optical Imaging System (ATTIREOIS). ATTIREOIS sensor payload consists of two sets of advanced Focal Plane Arrays (FPAs)Â? a broadband Thermal InfraRed Sensor (TIRS) and a four (4) band… more
Abstract:… acquired during off-line tests. The proposed research will develop a monitoring system that will make it possible to replace turbine components based on their actual condition. Turbine components will be replaced only when they are worn, such as when the thermal barrier… more
Abstract:… capabilities to save ischemic tissue at risk of reperfusion injury. Specific Aims: 1.) Design a cooling guide catheter that can be used with existing mechanical clot removal devices and that can quickly reduce target tissue temperatures, 2.) characterize device thermal-fluid… more
Abstract:… further hypersonic effect closures into PANS. Physics-based closure models for flow-thermochemistry interactions have been under development in Girimaji's group at Texas A & M under AFOSR MURI funding -- Transition and Turbulence modeling in non-… more
Abstract:Photonic devices are used to produce, transmit, modulate, and detect light. These devices are widely used in the data storage and communications industries. Commercial photonic devices are typically made of rigid materials including inorganic oxides and semiconductors, however,… more
Abstract:… scale. We have already produced the antibody to be used in this study. In this Phase I SBIR, the antibody will be tested for its ability to bind the proteins associated with toxicity in celiac disease: gliadin, glutenin, gluten-derived peptides, and related storage proteins… more
Abstract:… a tactical directed energy weapon (DEW) system is soon to be realized. However, recent demonstration systems have revealed new challenges related to system tracking due to interference between the HEL delivery and the tracking imagery. These effects include thermal… more
Abstract:DESCRIPTION (provided by applicant): The overall goal of this proposal is to design and develop a type of cryopreservation media and an easy-to-use cooling device that allow the long-term storage and safe shipment of animal model germplasm (embryos and spermatozoa) and embryonic… more
Abstract:Long CNT arrays are important to develop high performance material for coaxial cable. Long nanotubes reduce the number of junctions and twist angle in CNT yarn, resulting in increased mechanical, electrical, and thermal properties. General Nano, LLC (GN), the lead applicant and… more
Abstract:… (e.g., detoxify, kill or decompose) chemical and biological (CB) warfare agents in a plume released from an offensive operations strike on enemy Weapons of Mass Destruction (WMD) facilities. DESCRIPTION: Current conventional weapons rely on blast, fragmentation, and … more
Abstract:…rature reaction. The second technique provides dissemination of TiO2 particles (and metal flakes) by gas generation from the (low-T less than 300degreesC) decomposition of additives which are activated by a proprietary"chemical heater"and an efficient heat transfer… more
Abstract:… at 500<SUP>o</SUP>C. Novel power device packaging techniques in the areas of power substrate, die-attach, chip metallization and wire bonds will be explored to demonstrate reliable module operation at 500<SUP>o</SUP>C after several thermal cycles… more
Abstract:… or makeup sources (e.g., water brought up from the ground or obtained through fuel cells). There are concerns that reclaimed water may contain trace toxic metals and/or the recovery and treatment processes may result in corrosion and leaching of metals during storage (methods… more
Abstract:…power and specific energy will be examined experimentally to optimize electrode composition and design. Scalable performance will be demonstrated in cells over the temperature range of -40 to +70 degrees C and stability evaluated with exposures of +85 degrees C storage… more
Abstract:… geometric non-linearities will be characterized based on Abaqus"kinematic description, coupled with its user-defined subroutines. The large deformation model will be formulated based on the additive decomposition of the strain rate tensor in elastic, thermal, and… more
Abstract:… leaks or degradation were detected in a test with more than 40 cryo-pressure cycles.While other efforts are exploring the reliability aspects of the BHL technology at larger scales, the proposed effort will focus on evaluating the long-term cryogenic propellant storage… more
Abstract:…feasibility of the SMFB technology for fusion bonding of thermoplastic matrix composites. GTL will perform a series of experiments to quantify the effectiveness of various SMFB configurations. The effort will also explore several options for introducing the required heat to melt… more
Abstract:…. BioSentinel, in collaboration withMetabiologics, proposes to optimize BioSentinel's cell-based assay for BoNT/A detection, generate a BoNT/A reference standard, determine whether the assay offers improved precision compared to the mouse bioassay, and, using thermally… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.