Abstract:… catalytic CO2 reduction reactor, capable of converting mixtures of CO2 and H2 to carbon and water vapor with high CO2 conversions at high throughputs and at low operating temperatures. This is based on a novel catalytic reactor approach with high heat… more
Abstract:Mercury occurs naturally in rocks, soils, water, and air; anthropogenic sources of mercury, as a contaminant of concern, are found at 290 Superfund National Priority Sites. Thermal treatment, whether practiced above ground on contaminated materials removed from a site, or in… more
Abstract:Gas turbine and diesel engines lose a significant portion of energy to the environment as waste heat. Recovery of this waste heat offers the potential for increased fuel savings. The design of a durable heat recovery device such as a heat exchanger for this… more
Abstract:The most promising and scalable high-power laser geometries effectively manage thermal transfer from the laser crystal to the heat sink. While next generation crystals and pump geometries aim to eliminate waste heat in the first place, it will always be the case that efficient… more
Abstract:Large diameter optics have numerous challenges, including fabrication, surface figure, weight, transport, mounting, materials choice, and thermal concerns. High Energy Laser applications bring additional challenging parameters to the mix, such as surface micro-roughness, laser… more
Abstract:DESCRIPTION (provided by applicant): Fixation of tissue samples with formalin and paraffin is an established approach for long-term storage of tissues for later histological analyses. These formalin-fixed paraffin-embedded tissues can also be used for DNA,RNA or protein… more
Abstract:… environment. All sample processing will occur in sealed sample containers. These containers will facilitate sample homogenization, lysis, and rapid extraction of target molecules. Additionally, they will be suitable for sample collection, transportation, and storage (pre-… more
Abstract:… with both high system-level efficiencies and power densities. Prime Research (PRLC) proposes the development of a thermoelectric generator (TEG) that incorporates state-of-the-art thermoelectric materials within an innovative low-thermal resistance and flexible heat pipe… more
Abstract:Reduce the logistical costs associated with the deleterious effects of long term storage of rechargeable lithium based batteries. The self discharge characteristics of rechargeable batteries necessitates monitoring to prevent permanent damage and attendant replacement cost.… more
Abstract:… conditions prompts the need for the development of innovative very high power, broadband, directional transmitting arrays while reducing the size and weight compared to traditional transducer arrays. The utilization of projector driver materials that can withstand heat… more
Abstract:Our proposal looks at an area of Cloud Computing: distributed data storage. We plan on investigating persistent cloud-based methods for storing any type of data but initially focusing on track storage. We"ll perform a trade study on a set of available products and… more
Abstract:The concept we propose is the development of a new Application Programming Interface (API) available to all USW-DSS developers and Computer Software Configuration Items (CSCIs) for their data storage, retrieval and query needs. This provides value by removing the multiple and… more
Abstract:… increase the productivity of the user by removing or automating the barriers currently involved with accessing data at different classification levels simultaneously. This paper will describe a series of solutions based on Trusted Operating Systems, Centralized Data Storage,… more
Abstract:…anticipated result will be an improved hydrogen recycler which will enable substantial reduction in hydrogen production cost and new market opportunities. The broader impact/commercial potential of this project includes applications ranging from power plants to heat treating to… more
Abstract:Solar and wind energy are the most likely candidates to meet our future energy needs based on the available capacity. The problem is that these renewable sources are not consistently accessible, and thus storage must be an integral part of the energy solution. Hydrogen… more
Abstract:… would employ a simplified technique of generating synchronized, ps-duration pulses compared to traditional mode-locking scheme. At high-average-output power and high repetition rate, the fiber lasers offer advantage over bulk laser due to their ease of thermal management… more
Abstract:… prior experience with satellite-based hardware to enable our advancement in the state-of-the-art for transmitters. The inherent high efficiency reduces the overall thermal load for the system, and the use of optical-fiber technology allows distribution of the sources of heat… more
Abstract:… a quantum dot (QD)-based downconverting film coated directly on a light emitting diode (LED) chip. Integration of high-efficiency QD materials as LED downconverters can enhance the efficiency and quality of the light output; however, existing QD films lack the thermal… more
Abstract:… 10 quads of U.S. primary energy consumption. Motors power the equipment and control the environment in advanced cooling applications and thus their energy consumption represents a significant part of their operating and life cycle costs.Fan motors for heating, cooling… more
Abstract:We propose a microwave microscopy for blade health measurement of aircraft engines at high temperature. Its designs will efficiently insulate the sensor components from the combustion heat without sacrificing the measurement sensitivity and accuracy. The microwave sensor is… more
Abstract:…, hostile environment in a compact package."In its response to this solicitation, Quallion proposes to leverage a former Phase I MDA SBIR effort to determine the feasibility of utilizing lithium-ion battery technology into a reserve type (decades of storage) battery… more
Abstract:… development of [i]ncrease the operational temperature range of prismatic laminate lithium ion battery cells through electrolyte and materials improvements which allows transition of these batteries to Army ground vehicles without the overhead of specialized heating and cooling… more
Abstract:Quallion LLC"s (Quallion) proposal responds to SBIR Solicitation No. A10-139 entitled"Lithium Air Rechargeable Battery."The solicitation calls for lithium air battery with a much higher energy density and longer duration energy storage system to replace lead acid… more
Abstract:At the present time, relatively few components for onboard hydrogen storage are commercially available and manufactured. Todays 700 bar (10,000 psi) compressed hydrogen storage systems have demonstrated the capability to provide sufficient capacity to enable fuel cell vehicles… more
Abstract:… and testing a wMLI prototype with a measured heat leak 3.6X lower than spiral-wrapped conventional MLI widely used for piping insulation. A wMLI prototype had a heat leak of 7.3 W/m2, or 27% of the heat leak of conventional MLI (26.7 W/m2).
Modeling estimates the thermal… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.