Abstract:The primary objective is to provide the concepts and architecture for a real time adaptable ROIC that can be configured dynamically to meet the needs of the application and the real time conditions. Intrinsix will investigate the methods to sense the scene content and to dynamically adjust… more
Abstract:Future space tracking and surveillance systems are being required to provide ever-increasing sensor resolution and real-time processing of image data. What is needed is a flexible, high performance monolithic computing engine which is rad-hard to 300 krad (Si) and an architecture which is suitable… more
Abstract:Intrinsix will develop an IR Digital Focal Plane Array (DFPA) enabled by high performance Sigma-Delta-Modulation (SDM) based Analog to Digital conversion (ADC). Benefits include: 1. Support for a wide range of Strained Layer Super lattice detectors a. Per frame support for two color operation… more
Abstract:ABSTRACT: The USAF has identified a series of potential problems created by the capability limits of the present ignition technology. These limits are most pronounced at high altitude where low pressure and vitiated air produce an ignition limited condition. Knite"s Kinetic Spark Ignition… more
Abstract:Alphabet Energy, Inc., is commercializing a breakthrough thermoelectric material from the Lawrence Berkeley National Laboratory for waste heat recovery. Waste heat recovery is a US$50 billion opportunity in the US per year for the generation of electricity from waste heat in power plants, factories,… more
Abstract:Purpose: Autism spectrum disorders (ASD) are neurodevelopmental disabilities characterized by deficits in social competence, communication skills, and behaviors that are restricted and repetitive. ASD are one of the fastest growing disability categories in the country, with recent prevalence rates… more
Abstract:The objective of this proposal is to demonstrate the feasibility of a fully packaged microelectromechanical (MEMS) gyroscope with a 7 milliarcsecond pointing accuracyÂ?sufficient for space and terrestrial telescope pointing applications. This new environmental resistant packaged (ERP) resonant… more
Abstract:The objective of this proposal is to demonstrate the feasibility of a vibration suppression technology tailored for crystal oscillator applications called the integrated vibration isolator for Quartz (IVIQ). Vibration is an important factor for Quartz timing applications since vibration causes… more
Abstract:ABSTRACT: The primary objective of the proposed STTR is to develop a low-cost, high performance material which is capable of directionally-tailored thermal emission and/or transmission control. By combining advanced electromagnetic band structure engineering techniques with low-cost, self-assembled… more
Abstract:Aluminum-coated, glass strands have been used for RF countermeasures (RFCM) for more than 50 years. This type of RFCM system is becoming outdated and potentially ineffective. New material technologies are needed to ensure aircraft RFCM are effective in the 21st century. Through the use of… more
Abstract:The objective is to provide a robust thermal control subsystem (TCS) design focused on overcoming the unique challenges of Responsive Space (RS). The proposed TCS design will be based on state-of-the-art technologies including: variable emissivity devices, variable heat transfer layers, and advanced… more
Abstract:There is a critical need for lighter, smaller, inexpensive, and higher performance optical components in many military programs such as Thermal Weapon Sight (TWS), Enhanced Night Vision Goggle (ENVG), Monocular Night Vision Device (MNVD), Aviators Night Vision Imaging System (ANVIS), Sniper Night… more
Abstract:The combined team of Neya Systems, LLC (NSL), and Carnegie Mellon University (CMU), propose to develop the Casualty Evacuation Mission Management System (CEMMS), an effort that will provide significant opportunities to: 1. Develop a Domain Specific Language (DSL) that enables translation from… more
Abstract:As robots become more widely employed in tactical operations and gain greater autonomy for doing simple tasks, they must become more integrated into the processes of mission planning and management. This integration will come by means of standardized command and control interfaces mandated by the… more
Abstract:The need for controlled medical tissue regeneration in trauma or disease therapies has long existed. Only recently, however, has sufficient technology been developed to even begin exploring human applications. A key breakthrough was the discovery of the stem cell as a significant element for… more
Abstract:This MEMS device will permit for resonator structures to be isolated from vibrations present in avionics. The device can be fabricated as a drop-in replacement for existing oscillators or as a new component for next-generation systems.
Abstract:In this proposed Phase II SBIR project for the US Army, Orbital Traction, Ltd, of Houston Texas, will develop, fabricate, test, and demonstrate a prototype of a novel Controlled Velocity Accessory Drive (CVAD) for use on military ground vehicles. This innovative device, designed to DOD requirements… more
Abstract:The Track Simulator (TrackSim) software developed for the Phase I effort will be integrated"In the Loop"with the highly successful AquaQuIPS (AQ) data fusion engine (DFE) in Phase II. The product to be developed is TrackSim fully integrated with AQ's DFE and all of it's current… more
Abstract:Phase I work will focus on demonstrating the feasibility of our proposed approach to fabricate type-II strained-layer superlattice FPAs based on III-V materials with improved state of the art in performance. Phase II effort will be directed at validating the approach with demonstration of large… more
Abstract:The objective of this proposal is to use the proprietary knowledge of Read Out Integrated Circuit (ROIC) unit cell and architecture design from Infrared Laboratories, Inc. (IRL) and Valley Oak Semiconductors, LLC (VOS, a wholly owned subsidiary of IRL), to develop and demonstrate a smart ROIC for… more
Abstract:The objective of this proposal is to use the proprietary knowledge of readout integrated circuit (ROIC) design gained through our past 20+ years of experience to investigate, research and design a dedicated readout architecture optimized for the high performance C-QWIP PDAs developed by the Army… more
Abstract:In Phase-I of the project we constructed a unique ROIC design based on our Amplifier-Shared-Dual-Band CTIA (ASDBC) technology to address the problems experienced by the existing ROICs. In Phase-II, we will refine and complete the design, manufacture the ROIC, fabricate the FPA, and test the… more
Abstract:An integrated, in-situ, real-time, optical metrology system will be developed to measure temperature, film stress and reflectivity during CdTe and HgCdTe-based deposition applications. Temperature measurement will be performed using band-edge thermometry and blackbody radiation analysis to provide a… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project aims to develop efficient manufacturing of nanostructured flexible transparent conducting electrodes (TCEs) with low resistivity and high durability. Flexible nanostructured TCEs will be produced by using the proprietary… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.