Company:Lao K LLCAgency/Program/Year/Phase:EPA / SBIR / 2011 / 2
Abstract:Interior wood composite panels are widely used for furniture, bookshelf, kitchen cabinets, flooring, and other building materials, and are predominantly made with carcinogenic urea-formaldehyde (UF) resin. New formaldehyde-free wood adhesives that mainly consist of abundant, renewable, and readily… more
Abstract:Defiant Technologies builds and markets chemical detectors and it is developing a portable system to measure trace amounts of perchloroethylene (PCE) and trichloroethylene (TCE) in ground water. This GC-based system will provide onsite results and reduce the need for time consuming and costly… more
Abstract:Polyurethane (PU) coatings continue to be a detriment to the environment. As long as compliance leads to higher costs for coatings manufacturers and applicators, tighter regulation will lead to increased resistance by these companies or ultimately will shift production to less regulated areas. The… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project plans to refine and test prototype facilities for commercialization of on-farm algae production and harvesting. Algae will be utilized initially for livestock feed and in future for bio-fuel. The project targets an emerging global… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project develops devices and systems to conduct two-way data communication using the electrical power distribution grid as the communications medium. The Phase I research provided information needed to optimize the devices, systems, and methods… more
Abstract:More than 10 million tons of polyurethane (PU) foams are manufactured globally each year, and as much as 20% of that production is unsellable scrap. Combining that manufacturing scrap with end-of-life recycling or disposal of PU foam, every year there is a tremendous waste of material that was made… more
Abstract:Engineering and qualifying a rubber component for dynamic applications is often time-consuming and expensive due to the need to control fatigue failure. Endurica"s Phase I project demonstrated feasibility of using numerical simulation of rubber"s failure process to compute effects of… more
Abstract:The objective of Phase II is to implement and demonstrate the Open source Dynamic terrain API for SAF systems (ODAS) approach proposed, defined, and prototyped in Phase I for interoperability and correlation between dynamic formats and classic static, pre-distributed terrain solutions used by OneSAF… more
Abstract:Domestically produced wool, a sustainable, readily available, and cost effective fiber, has the potential to significantly contribute to the need for no melt/no drip and fire resistant (FR) clothing critical to the safety and survivability of US Army Soldiers. Currently the use of wool is… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project aims to bring to market a hand-held probe used by the surgeon to ascertain that the surgical wound and regional lymph nodes are clear of cancer. This technology will provide a highly innovative, rapid and accurate device for detecting… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project will develop and test real-time process monitoring systems to support manufacturing of miniature digital cameras. Rapid growth in unit volume of digital cameras for cellphones and consumer goods has outpaced the industry?s manufacturing… more
Abstract:Accurate Position Location Information (PLI) enables deployment and coordination of ground-based assets, e.g. soldiers and ground vehicles, and is required for safe and effective completion of diverse missions. PLI from computer machine vision, e.g. visual navigation, has the potential to replace… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project has as its main objective the development of a mobile physiological optical imaging hardware and software system to empower clinicians with the ability to deploy, capture, assess and distribute standards compliant image data… more
Abstract:The objective of this project is to build a Hypo-Hyperbaric Chamber System for use with Magnetic Resonance Imaging (MRI). MRI has proven to be the method of choice for detecting disease in soft tissue. It has found a wide range of applications in most parts of the body and for many diseases. This… more
Abstract:During Phase 1 API Engineering LLC demonstrated feasibility of an oxygen source for UUV solid oxide fuel cell power systems using an aqueous chlorate solution for its oxygen storage composition. Twenty subscale breadboard laboratory decomposition tests plus ten product disposal tests provided the… more
Abstract:In the Phase I effort MAST Technologies developed a variety of high temperature coatings that meet or exceed survivability at 680 degrees F for 10 minutes or 1300 degrees F for 10 minutes. 680 degrees F materials are elastomeric in nature and can function as EMI/RF shielding, low dielectric layer,… more
Abstract:Self-biased ferrite circulator and isolator devices have previously been demonstrated and discussed in the literature. While operation without biasing magnets was verified, all the prototypes constructed thus far exhibited relatively high loss and poor isolation, which made them unsuitable for… more
Abstract:The development of switch mode power supplies is constantly challenging the ferrite industry to produce new, high-quality ferrite cores capable of operating at increasingly higher frequencies and low loss. Furthermore, it is important to reduce the power losses of ferrite cores used in transformers… more
Abstract:Modern active electronically scanned phased array radars provide outstanding capability but are unfortunately expensive. To a large degree, this results from the need for power and low noise amplifiers at each antenna element. A promising alternative architecture shares the amplifiers among many… more
Abstract:Photochromic technologies that can modulate absorption, emission and reflection properties show promise as a means to achieve visual signature reduction for vessel in an oceanic environment. Dynamically changing the vessel"s color, brightness, and hull coating patterns will minimize a… more
Abstract:This is our SBIR Phase II proposal for the development of working prototypes of a free swimming dive suit system for use in contaminated water by NSW divers. Existing commercial equipment available for contaminated water diving provides a high level of protection but does not allow"free… more
Abstract:Kuma Signals proposes to prototype and test the Dillo fractional bit mapping framework investigated in the Phase I work plan. The Dillo system is designed to enable orthogonal frequency division multiplexing (OFDM) in high Doppler, low SNR, long delay spread environments with impulsive noise. The… more
Company:Group W IncAgency/Program/Year/Phase:DOD / SBIR / 2011 / 2
Abstract:Our proposal describes a systematic method to demonstrate how these conflicts and challenges to designing and developing a few-vs.-few model for air-prosecuted ASW can be overcome in a manner that will meet the needs of NAVAIR as the immediate sponsor as well as provide value as a model for other… more
Abstract:This Small Business Innovation Research (SBIR) Phase II project will develop an software system directed at financial institutions (lenders and investors) that will provide them with actionable, realtime intelligence into the health of private companies. The technology being developed will scan and… more
Abstract:Pacific Research Group (PRG) intends to develop a unique combination of components to create the most compact, lightest, and lowest power seawater desalination system ever made. Its low power requirement is due to the fact that the design utilizes a state-of-the-art energy recovery system and this… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.