Abstract:To address the Air Force's need to develop"low cost of ownership"inspection solutions, capable of inspecting various areas that require edge crack detection, UniWest proposes to further develop its production-proven eddy current flexible coil probe technology (currently capable of… more
Abstract:To address the Air Force"s need to perform a quantifiable inspection of the inside region of fastener holes with installed nut plates, UniWest proposes to design a probe that optimizes pertinent parameters to position the sensing mechanism at the edge of the fastener hole (including surface… more
Abstract:ABSTRACT: Select Engineering Services (SES) is a leader in developing, testing, and implementing frangible structures for airfield use worldwide. We have developed a large range of composite structures to improve the performance and quality of Air Force assets while decreasing costs to maintain… more
Abstract:ABSTRACT: Select Engineering Services (SES) is a successful provider of engineering and technical services to Air Force and Army customers; including system design, development, testing, and sustainment of complex tactical shelter and energy systems. Over the past nine years, SES has been… more
Abstract:ABSTRACT: Flow Modeling and Simulation proposes to develop a code designated Scramjet Simulation Tool (SCRAMSIM) to provide a powerful multi-level tool suitable for tight integration into the design, test and evolution cycle. The code will be based on the HEAT3D code. SCRAMSIM will be designed to… more
Abstract:ABSTRACT: A persistent presence above the battlefield provides for distinct advantages in areas of operation. Aerial platforms can suspend surveillance, SIGINT and C3 payloads aloft for the use of operators and observers. These resources have proven extremely effective when deployed in the field by… more
Abstract:ABSTRACT: This project concerns the research, development and demonstration of a novel MDO methodology that bridges the gap between conceptual and high-fidelity representation of air vehicle design by integrating engineering MDO principles, computer science software engineering, and biological… more
Abstract:ABSTRACT: We propose to develop a comprehensive, integrated software framework and toolset to support model-based engineering (MBE) of laser weapons systems. To be effective, MBE requires robust underlying modeling and simulation technologies capable of modeling all the pertinent systems,… more
Abstract:ABSTRACT: For this SBIR Proposal, NOHMs Technology will design a safe, non-flammable, dendrite-suppressing electrolyte from a family of unique class of self-suspended hybrid nanoparticles for use in Li-S batteries. The three electrolytes to be explored are: (1) NOHMs Electrolyte, (2) NOHMs… more
Abstract:A system is proposed that will enable large quantities (thousands) of batteries of various configurations to be transported, stored, maintained, monitored, and tracked by a single central control station. The wireless data transfer will enable monitoring of the status of these batteries by a local… more
Abstract:XCraft, along with its team partner KaZaK Composites, propose to develop and produce an innovative, low cost, pultrusion-based matting for soil stabilization applications. Developmental impetus for these novel mat structures is based on a need for improved mobility of heavy tracked and wheeled… more
Abstract:Research and development of an Expeditionary Matting/Soil Stabilization System (EMS3) to meet USMC requirements. We propose to recreate, using modern materials, the Mo-Mat EMS3 used by USMC since 1965 in form, fit and function, as much as feasible.
Abstract:A comprehensive diagnostics and prognostics Vehicle Health Management (VHM) Toolbox. The VHM Toolbox provides advanced data-mining capabilities to determine vehicle and fleet-level maintenance trends and failure mechanisms to improve platform availability and system lifecycle management. Two Toolbox… more
Abstract:The objective of this proposal is to develop a modification kit for the AN/SSQ-53 series of sonobuoys that will enable them to have a precision guidance and glide capability. The quick modification and installation kit will feature a slip on wing and tail assembly along with a precision guidance… more
Abstract:Navy ships require the use of hazardous materials (HM) such as hydraulic fluid, paint, acids, corrosives, etc. for daily operations. Navy safety regulations and HM management procedure (i.e. OPNAVINST 5100.19E and CHRMIP), require designated HM storerooms for bulk storage of flammable and corrosive… more
Abstract:The purpose of the Phase I work plan is to conduct the preparatory research necessary to develop a highly practical measurement model of MT and MT environments. The ultimate measurement model will have three integral products: (1) a readily accessible computer-based tool that can analyze the… more
Abstract:Fast Track Amphibian has made a key breakthrough that allows amphibious vehicles to use rubber tracks to provide propulsion during water-mode operations. Without the need to switch drive trains, extremely rapid transitions between water and land-mode operation are now possible, and the weight of the… more
Abstract:Currently the United States Navy fleet consists of thousands of valves per ship. Carriers can have up to 10,000 valves. The valves require routine maintenance to prevent failures that could lead to catastrophes.. Valves typically fail when the packing gland is compromised. This can happen when… more
Abstract:Probe and drogue air-to-air refueling (AAR) involves extending 70 to 80 feet of hose to allow for receiver engagement. If the receiver engages too fast and/or the hose reel fails to keep tension on the hose, a sine wave will develop. This sine wave can produce overloads on the receiver aircraft… more
Abstract:SW Enterprises, LLC has proven its drying technology to the commercial laundry industry. This technology is currently used in a commercial 75# drying system and dries laundry in industry standard times, while requiring no venting and producing less lint. The AdvanceDry75, using this patented heat… more
Abstract:The Modulated Rotor Tip Light (MRTL) system provides greatly enhanced visibility because blade tip light paths appear very large, intensity and narrow field of view LED optics are used and lateral separation between red and green lights can be as much as five times larger than the fuselage width.… more
Abstract:The proposed project focuses on the development of a prototype application to estimate neck load of a dismounted Warfighter engaged in three common mission tasks (i.e. marching, running, and jumping), using an existing verified and validated physics-based computational neck model. In contrast to… more
Abstract:We propose to develop an innovative methodology for life and reliability prediction of hot-section components in advanced turbo propulsion systems where the effects of the high heat dwell environment must be predicted accurately. This includes the activation of synergistic time-dependent damage… more
Abstract:The overall objective of the proposal is to use an integrated approach combining material, interface, device, and process engineering to demonstrate high-performance OPV module fabricated from all-solution and ambient process. The specific objectives of the program can be enumerated as follows: 1)… more
Abstract:This Phase I SBIR will develop a scaleable ambient atmosphere manufacturing process to make durable flexible inorganic CuSnZnS thin film solar cells. The existing nanomaterial film manufacturing techniques to fabricate thin film solar cells are cumbersome and may not be that cost effective. The… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.