Abstract:Since the anthrax attacks of September-October 2001, the United States has developed and deployed several biothreat detection systems (most notably at various postal service locations). The most accurate systems utilize PCR technology and are therefore bulky, cannot be easily miniaturized, and… more
Abstract:The proposed project will develop a direct ethanol fuel cell (DEFC) system based on our recent research breakthroughs in non-platinum catalysts, alkaline ionomers, and anion-exchange-membranes. The AEM-DEFC system will have several advantages, including (1) non-Pt catalysts with ethanol tolerance… more
Abstract:IvySys proposes novel asynchronous signal sensing and automatic modulation classification (AMC) approaches that leverage a centralized network of low-cost asynchronous sensors to enable weak signal detection and classification. These innovative approaches will provide detection performance within 3… more
Abstract:The purpose of this program is to develop a clip-on thermal imager device that covers the full 40 degree field of view of the host night vision goggle. MTEQ"s approach utilizes a novel optical coupling technique coupled with the latest high resolution infrared focal plane arrays to provide up… more
Abstract:Protocol Technologies Group proposes to transform OPLANS and OPORDS from"dumb"text messages into"Smart Documents"(but distributed across the same messaging networks) capable of carrying information with them (e.g., maps, imagery), interacting with their surroundings (users and… more
Abstract:Today"s field-programmable gate array (FPGA) devices are expensive in size, power, performance, scalability and flexibility. The fundamental problem in these devices is the use of 2D-mesh interconnect architecture: it occupies large area, has long latency, consumes lots of power, and is not… more
Abstract:The need to develop an alternative technology to those that dominate the snack food industry has become apparent over the last decade. Quality, nutrition, functionality, health considerations articulated by the consumers coupled to efficiency, low energy requirements, low asset base, small process… more
Abstract:This project will design a mid-sized unmanned ground vehicle (UGV) system to support soldiers to effectively perform improvised explosive device defeat (IEDD) tasks remotely. IEDD task areas include navigation, hazard sensing, and neutralization. The control system willenable simple and safe UGV… more
Abstract:MACH-T3 will generate three concepts as described below in sufficient detail for a trade study to be performed. All concepts will meet the mandatory requirement of identical form and fit to the current BFV interface. Gear trains are the most efficient means for power transfer. As such, MACH-T3… more
Abstract:Creative Engineering Solutions, in collaboration with QinetiQ North America and its LAST armor solution, proposes to develop a switchable magnetic core element (SMCE) attachment system that breaks the traditional tradeoff of detachment time, isolation, pull strength, and weight which has been the… more
Abstract:The optical see-through Head Mounted Display (OST-HMD) is one of the enabling technologies for merging virtual views with a physical scene and provides a direct view of the real world through an optical combiner. It is highly preferred in demanding applications where a users awareness to the live… more
Abstract:Resource optimization strategies for engaging multi-stage, long-range missiles carrying multiple warheads during the ascent phase is an area of interest to MDA and the larger DoD community. The ability to rapidly predict the outcomes of extremely large numbers of decision permutations is crucial in… more
Abstract:This SBIR Phase II proposal to the Department of Defense, Army, requests funding for Innova Dynamics to optimize and scale up the Innlay-based IonArmour Next Generation technology for deployment, providing the highest levels of safe, cost-effective, continuous antimicrobial protection for military… more
Abstract:The proposed Phase II effort involves development and demonstration of an all-carbon fiber/epoxy aft shell body and integrated aft pusher assembly for gun launched hypervelocity applications. The all-carbon fiber technology is the selected approach for this effort, owing to the cost effectiveness,… more
Abstract:The use of materials other than steel in bearing liners lead to many problems associated with variations in thermal expansion coefficients. The use of an aluminum matrix composite minimized this problem because adding ceramic reinforcements to the aluminum matrix reduces the expansion coefficient to… more
Abstract:Turbocam Energy Solutions LLC is providing this proposal for a Phase I Small Business Innovation Research Program. The objectives are to develop the concept and demonstrate the technical feasibility of a robust carburizing method for deep internal splines with high aspect ratios. Turbocam Energy… more
Abstract:Investigate design alternatives intended to achive amphibious vehicle performance within the following paramaters: land speed in excess of 80 mph, water speed in excess of 30 mph, road legal in all dimensions, transition between modes less than 30 seconds and with a payload of no less than six… more
Abstract:The current proposal addresses the design and fabrication of a rapidly deployable, autonomous underwater vehicle (AUV) suitable for operation within littorals and riverine environments. The proposed platform brings together current state of the art technologies in the areas of doppler sonar, power… more
Abstract:ABSTRACT: A reprogrammable software defined radio (SDR) will be developed for high performance channel coding in future satellite communications systems. The proposed device will make possible robust reprogramming of the radio after launch, thus enabling future satellites to be reprogrammed to… more
Abstract:ABSTRACT: Electro-optic (E-O) sensor payloads play a critical role in the gathering of information for variety of uses for both civilian and national security interests. Systems that provide this function can be grouped in terms of their capability which determines to a great degree their… more
Abstract:This Small Business Innovation Research Phase I project proposes a revolutionary approach to extending the lifetime of microchannel plate (MCP) photomultiplier tubes (PMTs) using atomic layer deposited (ALD) nanofilms to suppress the creation of damaging positive ions. The technical and intellectual… more
Abstract:Atomic layer deposited functional nano-film technology is used to manufacture Microchannel plate (MCP) devices capable of high gain / low ion feedback operation, on glass capillary array substrates, as a means to replace MCP chevron configuration and enable direct photocathode deposition (e.g. GaN)… more
Abstract:The work proposed in this SBIR proposal is is synergistic with the, DOE funded, basic R & amp;D effort of a consortium of national laboratories, universities, and industry, led by Argonne National Laboratory and the University of Chicago for the development of new, large area, photodetector… more
Abstract:Toyon proposes to develop software that can process infrared video streams to automatically detect gray whale blows. Additionally, the software will count the number of blows and estimate the speed and the number of whales that are present. We will make use of a novel technique for whale blow… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.