Abstract:… the thermal degradation state as functions of temperature, pressure and confinement. The expected outcomes of this project are novel test setups and methods, an engineering model for cookoff and a methodology to predict the response of full scale munition systems to heat… more
Abstract:… in the combustion environments. Bodkin Design & Engineering (BDE) proposes to demonstrate a multi-modal sensor system with capability to measure multiple species concentrations (including free radical species such as OH, CH and NH), local fuel/air ratios, heat release… more
Abstract:… and ecosystem health, and exists in many contaminated subsurface environments. Monitoring mercury contamination in groundwater is challenging due to the considerable effort and expense involved in collecting samples, maintaining sample integrity during transport and … more
Abstract:…, the efficiency will be greater than 60% across a broad throttling range of power and specific impulse. The iodine propellant will store at a density that is 2 to 3 times greater than xenon and at approximately one thousandth of the pressure. Passive long term storage of… more
Abstract:ABSTRACT: Busek proposes to developed a self-contained electrospray thruster that (a) requires no pressurized propellant tanks or valves, utilizes analog-only electronics, and stores propellant as a stable solid; (b) is capable of operation after extended storage and… more
Abstract:… of low-cost approaches for power and DCIU electronics design; and fabrication and qualification testing of a protoflight device. The micro pulsed plasma thruster is uniquely suited for nanosatellite propulsion, with its solid, inert propellant requiring no storage tanks… more
Abstract:… gyrotron at MIT. The Brewster angle window will be initially tested with the MIT gyrotron, and then tested at high average power using a gyrotron at General Atomics.Commercial Applications and Other Benefits: High power RF sources are desired for improved heating and… more
Abstract:… algorithmic developments, and model validation against relevant experimental data. The Phase-II efforts will address critical modeling aspect that have been identified in Phase I in association with the prediction of JICF autoignition regimes, air-fuel mixing, and heat-transfer… more
Abstract:…system The entire pancreas is then cooled under conditions that promote ice formation and destruction of the acinar tissue while preserving the endocrine portion by virtue of the cryoprotectant infiltration. The solid frozen pancreas is then amenable to indefinite storage and… more
Abstract:… be 2,588M in 2013. The technology development in this proposal will minimize costs by reducing the manufacturing steps required for engineered human tissue-derived products to be non-immunogenic. This technology simultaneously provides a long-term tissue storage method,… more
Abstract:Future high-speed missiles require aerodynamic infrared dome shapes that reduce drag and have greater ability to withstand aerothermal heating. Decreased drag enables a combination of increased speed, range, and payload. Previous Navy funded programs have addressed development… more
Abstract:… will be of direct commercial value in military (DoD, MDA, etc), NASA, and civilian sectors. The product will deliver DoD researchers a valuable tool to: (1) enable accurate feature detection and Region Of Interest (ROI) identification for selective visualization and storage;… more
Abstract:… in a representative SOA environment. To show feasibility, different types of SOA services across multiple different domains will use METSI to quantify the trust in information. We will also conduct a performance assessment of METSI to demonstrate its minimal storage and… more
Abstract:… speed, GPUs will be used to accelerate linear solvers and Octree Cartesian mesh adaptation will be used to reduce computational size. The thermal solver will be linked to a multicompartmental model of systemic blood circulation, tissue perfusion and heat transport.… more
Abstract:… new electrode materials that provide higher specific capacity and power performance. The overall objective of the proposed effort is to develop (design, fabricate, test and demonstrate) novel cathode materials for thermal battery with five times higher Li+ storage capacity… more
Abstract:… temperatures. In Phase II, CFDRC, along with the university and industry partners, will fine-tune these compounds to further improve the properties relevant to practical applications. A battery of tests will be run to down-select one compound. The tests will include heat of… more
Abstract:The Army"s Land Warrior concept requires a high efficient, portable, day-night continuously functioning battery charger/storage unit (BCSU) that will lessen the Soldier"s load. However, existing energy harvesting technology such as the photovoltaic cell is limited by… more
Abstract:ABSTRACT: The goal of this technology development is to design, develop and test Li-ion battery cells with long cyclic life composing an advanced cathode. There are number of candidate cathode and anode materials are considered promising candidates for lithium ion battery due to their large… more
Abstract:… of human biological samples collected during extended spaceflight and planetary operations, Chromologic (CL) proposes to develop a novel Biological Sample Ambient Preservation (BioSAP) device. BioSAP device is based on an improved dried biological specimens storage… more
Abstract:… are undetectable in remote locations, and therefore present a danger to the health of military personnel. The Bio-Fluid Self-Extraction (BioFLEX) system addresses this problem by combining the simplicity of finger stick blood collection with a manual pumping system for storage… more
Abstract:… to develop an Integrated Membrane for Preservation of RNA Transcripts (IMPRiNT) that utilizes relatively small sample sizes coupled to membrane-adsorbent technology that fractionates and preserves RNA and other nucleic acids (e.g., microRNA) for long-term storage at… more
Abstract:… precursors and carbon templates. Achievement of our Phase II goals of 30 Wh/kg at 10 kW/kg (packaged) with consistent performance up to 5x10^5 cycles means that this technology can become the material of choice for application to high-energy, high-power energy storage… more
Abstract:… compositions (e.g., surface area, pore size, pore volume, surface polarity and chemical composition) and the effectiveness of the mesophases in forming carbonaceous and ceramic chars that function as a barrier toward the three components that support combustion (heat, oxygen,… more
Abstract:…, providing on-demand services and cloud computing imposes a few major challenging issues including: transparency, scalability, platform heterogeneity, and unstable network bandwidth. The work proposed here will address these challenges by making computing and storage resources… more
Abstract:The design, development and staging of tests to certify liquid rocket engines usually require high-fidelity structural, fluid and thermal support analysis. These analyses are crucial to a successful engine test program since pressurization requirements, heat loads, cooling… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.