Abstract:The objective of this project is to build and deliver to the Army two prototype systems that will verify a reduction in fuel consumption by at least 30% and reduce weight by at least 30%, when compared to a currently fielded system. The design presented in this proposal is expected to reduce fuel… more
Abstract:Significant and growing use of communications, remote sensing and triggering devices by friend and foe are characteristics of modern warfare. The ability to Direction Find (DF) on the resultant radio transmissions is a critical capability. Advances in electronics and battery packs have enabled… more
Abstract:The proposed project will focus on the development of closed loop frequency control hardware and algorithms for control of high quality factor tunable microwave filters based upon evanescent mode resonators. The developed controller will be modeled in Matlab to predict overall speed and stability.… more
Abstract:ABSTRACT: Airborne Innovations proposes to develop a subminiature high definition video transmission system and command and control link. We will emphasize technologies needed for practical use of such a system. From our expertise in UAV imaging systems we are uniquely qualified to provide the… more
Abstract:SCIT Labs SBIR proposal is in response to the Department of Homeland Security (DHS) Office of Science and Technology call for new approaches to
cyber defense using Moving Target Defense (MTD). SCIT Labs' is proposing a set of research tasks to enable organizations to evaluate the viability of
Abstract:The goal of this research is to study the feasibility that mobile devices have the capabilities and accuracy to be used as positioning devices for connected vehicles programs. We will demonstrate this proposition by implementing positioning capturing apps using the build in GPS and accelerometers,… more
Abstract:ABSTRACT: The objective of this Phase II proposal is to develop and prototype a binocular, see-through, monochrome holographic waveguide helmet mounted display (HWVD). The optical system will couple a commercial high resolution 1920x1080 pixel LCOS microdisplay with a state of the art holographic… more
Abstract:With the growing demand for more efficient fingerprinting techniques, live scans are rapidly displacing traditional ink-based methods. Despite improvements in detector and processing technology for capturing and digitizing fingerprints, current equipment falls well short of NIST’s goal of a small,… more
Abstract:The ideal augmented-reality (AR) head-worn display (HWD) for training purposes would be one that offers a panoramic see-through of the surrounding environment overlaid with high-resolution color imagery. Such a system should also be unobtrusive; that is, compact, light-weight, and comfortable, where… more
Abstract:ABSTRACT: SBG Labs has developed a display technology with a suite of disruptive characteristics ideally suited for next-generation helmet mounted displays (HMDs). The key characteristics of this novel HMD are: (1) a 90a field of view with a 30a binocular overlap at the center; (2) high-resolution… more
Abstract:ABSTRACT: The ideal see-through display would be one that preserves situational awareness by offering a panoramic view of the surroundings with overlaid high-resolution color imagery. Such a system should also be unobtrusive; that is, compact, light-weight, and comfortable, where comfort comes from… more
Abstract:ABSTRACT: Project Objective: The SBIR objectives are to provide rapid connect durable technological improvements for radome interfaces of panel attachments and other hardware structures including radome support structure connections. These technological improvements will increase durability and… more
Abstract:Autism Spectrum Disorders (ASDs) are severe neurodevelopmental disabilities characterized by deficits in social and communication skills and the presence of restrictive, repetitive behaviors. For the 80 percent of individuals with ASDs who speak, prosody—the rhythm, stress, and intonation of… more
Abstract:A lightweight, low-cost, high performance device that can superimpose computer generated information on an individual"s field of view is needed to train today"s soldiers. An alternative to a digital see-through system (where a camera feed is relayed to a HWD) is an HWD system that provides… more
Abstract:The objective of the proposal is to demonstrate the feasibility of a generic package that provides high vacuum, temperature control and vibration isolation for a wide range of high performance (tactical and navigation grade) micromachined inertial sensors. Inertial sensors (accelerometers and… more
Abstract:The Objective of Phase I was to develop improved methods for explosively disseminating non-toxic obscurant materials while minimizing particle damage and agglomeration due to the explosive forces. Of particular interest were materials having optical properties in both the infrared (IR) and visible… more
Abstract:ABSTRACT: This effort will provide both a rapid, satellite thermal modeling tool and deployable radiator system specific to Responsive Space needs. The thermal analysis tool will allow users to make rapid decisions and apply appropriate hardware from a specific RS thermal toolbox. The deployable… more
Abstract:The Dietary Data Recorder (DDR) system developed at the University of Washington already demonstrates much of the requested functionality. The system collects and records video, voice, and text annotations, and transfers this information into a dietary rich media database. The goal of this project… more
Abstract:This Small Business Innovation Research (SBIR) Phase I project investigates the feasibility of employing high?resolution, colorized, 3D models of food produce captured with structured light technology to identify (ID) and sort produce by quality. The feasibility of accomplishing this within the… more
Abstract:In current military and civilian ground vehicles, accessory components are designed to work across a large range of rotational speeds. This typically results in accessories that are over-sized. Consequently, efficiencies suffer over a significant portion of the accessory operational range. A… more
Abstract:In this proposed Phase II SBIR project for the Office of Naval Research, Orbital Traction, of Houston, Texas, will develop, fabricate, test, and demonstrate a prototype of a novel variable speed cooling fan for use on military ground vehicles. This innovative device will improve fuel efficiency by 1… more
Abstract:Phase I objective is to demonstrate the feasiblility of our proposed approach to minimize the defect and dislocation size and densities in Si substrate based HgCdTe epitaxial layers with a cut off wavelength of ~10 microns at 77 K. Phase II effort will validate our approach with demonstration of… more
Abstract:Phase I objective is to demonstrate the feasibility of our approach to reduce the dislocation density to below 1E5 cm-2 in LWIR HgCdTe epitaxial layers grown on Si substrates. Phase II objective is to demonstrate dislocation density to below 1E5 cm-2 reproducibly in LWIR HgCdTe epitaxial layers… more
There are several categories such as “By Agency”, “By Year”, “By State” etc.
Select a checkbox within a category to refine your search results.
Each of your selections is listed in the “Narrow Search Filters” bar. You can uncheck these selections to remove them.
Search for Either Criteria
When you select multiple values within a category, the results will include values that match either of the selections.
For example, selecting “2005” and “2007” in the “By Year” category will display results that include either 2005 OR 2007 in the results.
Narrowing the Search Results
You can refine your search results across categories. To narrow down your results, select multiple values across different categories. The results will only include values that match the selections across the categories.
For example, selecting “2005” in the “By Year” category and “NASA” in the “By Agency” category will only display the results that contain both “2005” AND “NASA” in the results.