You are here

Fast-Payback Polymeric Solar Water Heaters with Controlled Heat Transfer

Award Information
Agency: Department of Energy
Branch: N/A
Contract: DE-FG02-13ER90474
Agency Tracking Number: 87923
Amount: $150,000.00
Phase: Phase I
Program: SBIR
Solicitation Topic Code: 03e
Solicitation Number: DE-FOA-0000715
Solicitation Year: 2012
Award Year: 2013
Award Start Date (Proposal Award Date): 2013-02-19
Award End Date (Contract End Date): N/A
Small Business Information
1046 New Holland Avenue
Lancaster, PA 17601-5606
United States
DUNS: 126288336
HUBZone Owned: No
Woman Owned: No
Socially and Economically Disadvantaged: No
Principal Investigator
 Tapan Desai
 (717) 295-6817
Business Contact
 Jon Zuo
Title: Dr.
Phone: (717) 295-6058
Research Institution

Solar water heaters are an efficient means to harvest energy from the sun to heat water for domestic use (i.e. bathing, washing dishes, etc.). However, the current solar water heating systems cost approximately $133/ft2 and have a payback period of 7-10 years, including incentives and rebates, which is prohibitively expensive for most homeowners. The initial expense is largely attributed to the solar collector (30%) and installation and labor costs (70%). The solar collectors for these systems are made mostly out of copper, which adds significant weight to the solar collector and increases its installation costs. The creation of a lighter weight, less expensive solar collector will help reduce the payback period while taking advantage of renewable solar water heating technologies. The overall objective of the Phase I and Phase II program is to develop and demonstrate a fully-glazed polymeric solar water heater with enhanced overheat protection. The proposed innovation will provide passive measures for enhanced heat transfer during dry stagnation, thus reducing the maximum temperature to a safe limit for polymer materials. Replacing metal components with polymeric materials will reduce the material and production costs of solar collectors and the overall weight of the solar collector. More importantly, the weight reduction will increase the ease of installation, thus reducing the largest portion of the system cost, the installation and labor. The proposed polymeric solar collector is expected to reduce the installed cost of solar water heating systems to $50/ft2 and the payback period to less than 5 years, excluding incentives and rebates. Advanced Cooling Technologies, Inc. (ACT) will partner with AET Solar, LLC. to create a first of its kind fully-glazed polymeric solar water heater. Tri-State Plastics, Inc. will serve as consultants for polymer selection and processing/manufacturing. Currently 13% of the energy usage in homes is to heat water for showering, washing clothes and dishes, and preparing food. In 2010, residential buildings in the United States used 840 billion kWh of energy for water heating at a cost of $97 billion. Solar water heating can alleviate 80% of this energy demand and reduce energy consumption by 673 billion kWh, saving $78 billion annually in the United States. Reducing the initial installation cost of solar water heating systems by incorporating polymer materials will enable more homeowners to participate in solar technologies, which reduce CO2 emissions and foreign fuel consumption.

* Information listed above is at the time of submission. *

US Flag An Official Website of the United States Government