You are here

Light Transparent, Electrically Conductive Coatings by Filtered Cathodic Arc Plasma Deposition

Award Information
Agency: National Science Foundation
Branch: N/A
Contract: 0216628
Agency Tracking Number: 0216628
Amount: $0.00
Phase: Phase I
Program: STTR
Solicitation Topic Code: N/A
Solicitation Number: N/A
Solicitation Year: N/A
Award Year: 2002
Award Start Date (Proposal Award Date): N/A
Award End Date (Contract End Date): N/A
Small Business Information
2235 Polvorosa Avenue, Suite 230
San Leandro, CA 94577
United States
HUBZone Owned: No
Woman Owned: No
Socially and Economically Disadvantaged: No
Principal Investigator
 Michael McFarland
 (510) 483-4156
Business Contact
 Michael Boyle
Title: Vice President
Phone: () -
Research Institution
 Lawrence Berkeley Lab
 Othon Monteiro
1 Cyclotron Road
Berkeley, CA 94720
United States

 (514) 486-6159
 Federally Funded R&D Center (FFRDC)

This Small Business Technology Transfer (STTR) Phase II project will build upon and extend the encouraging results obtained in the Phase I program, which investigated the properties of thin, electrically conductive, UV transparent films and tri-layer metal coatings as possible diamond switch electrode structures for power electronics. Phase I benchmarked UV transmission, electrical conductivity and substrate adhesion for 14 to 44 nm Mo films, deposited using an energetic filtered cathodic arc deposition process. A companion program demonstrated a significant reduction in the diamond switch on-state resistance, and hence, improvement in switch efficiency, using these films as contact electrodes. The Phase II program will apply these results to a commercially relevant specification by demonstrating that the thin film deposition process can be scaled and the complex thin film mesa-shaped electrode topology can be realized. The anticipated mesa-shaped design will consist of a series of narrow tri-layer conduits, with the relatively large spaces in between coated with the thin UV transparent, electrically conductive film. This design maximizes the UV input into the diamond, which is used to activate the switch, while minimizing the electrical resistance. The properties of the electrode will be benchmarked against commercially relevant operating requirements.

* Information listed above is at the time of submission. *

US Flag An Official Website of the United States Government