You are here

Nitride, Carbide and Non-Oxide In Situ Coatings Using RECVD,A New CVD Method

Award Information
Agency: Department of Defense
Branch: Missile Defense Agency
Contract: N/A
Agency Tracking Number: 35797
Amount: $60,000.00
Phase: Phase I
Program: SBIR
Solicitation Topic Code: N/A
Solicitation Number: N/A
Timeline
Solicitation Year: N/A
Award Year: 1997
Award Start Date (Proposal Award Date): N/A
Award End Date (Contract End Date): N/A
Small Business Information
430 Tenth Street, N.w., Suite N-108
Atlanta, GA 30318
United States
DUNS: N/A
HUBZone Owned: No
Woman Owned: No
Socially and Economically Disadvantaged: No
Principal Investigator
 Andrew T. Hunt
 (404) 874-6550
Business Contact
Phone: () -
Research Institution
N/A
Abstract

Currently, thermal spray (flame and plasma spray) is the only single step method of applying most metal and non-oxide ceramic coatings to large objects. These coatings are usually of a low quality, and thin films cannot be applied. An in situ deposition technique that inexpensively and easily applies nitrides, carbides and other non-oxide thin or thick films in an environmentally friendly manner is a priority for any number of commercial applications. Combustion chemical vapor deposition (CCVDsm) as invented by the principal investigator and president of MicroCoating Technologies (MCT), is a low cost, high quality deposition technique that permits the deposition of many oxygen stable materials. CVD quality films of numerous materials have been produced via CCVD in the open atmosphere without a furnace or reaction chamber, but the process is generally limited to the deposition of oxides and noble metals. A new method, termed RECVD, has been conceived that allows for the deposition of carbides, nitrides and elemental coatings in the open atmosphere. Conventional CVD uses expensive, high vapor pressure precursors to deposit these materials. In contrast, RECVD, using MCT technology developed for CCVD processing, can utilize inexpensive, environmentally safe precursors since the vapor pressure of the precursors is not a considerable concern. Low cost, production friendly RECVD will be demonstrated for the first time during Phase 1. Cr. A1N. B4C, BN, SiC, Si3N4. TiB2, TiN, TiC and Ti will be thermodynamically studied for processing, and then the capability to deposit three of these materials will be experimentally tested. This proposal will demonstrate the capability to inexpensively deposit quality metal and non-oxide ceramic thin films that cannot currently be deposited under ambient conditions. Low cost, high quality coatings that can be applied over large areas are desired for wear, strength, chemical, electrical and thermal applications. The possible commercial applications are almost as large as the thin film metal and ceramic coatings field. Numerous companies have met with MCT and are excited about non-oxide CVD coatings applied in situ. A letter from General Electric, stating their into

* Information listed above is at the time of submission. *

US Flag An Official Website of the United States Government