Technology Holding, LLC

"Recent efforts at engineering the microstructures of SiC have resulted in fracture toughness values that are 2-3 times that of conventionally sintered SiC. However, these methods of toughening have ...

This Small Business Innovation Research Phase I project will develop and characterize a novel ceramic material and microcomponent fabrication technique for two different industrial sectors: the fiber- ...

65752 The electrical, physical, and chemical characteristics of the electrode materials in lanthanum-gallate-based intermediate temperature Solid Oxide Fuel Cells must be optimized for long-term e ...

65692 The maximum allowable operating temperature for metal materials used in the construction of heat exchangers for electric power generation systems is limited to approximately 700C, which seve ...

N/A

CERAMATEC HAS CONDUCTED EXPLORATORY RESEARCH AND DEVELOPMENT ON MONOLITHIC AND COMPOSITE MATERIALS IN THE ZRB2 AND TIB2 SYSTEMS AND HAS OBTAINED VERY ENCOURAGING RESULTS WITH SEVERAL PROPRIETARY COMPO ...

THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE SUCCESSFUL FABRICATION AND DENSIFICATION OF CERAMIC MATRIX COMPOSITES FORMED BY INJECTION MOLDING. TO ACCOMPLISH THIS OBJECTIVE, A DESIGNED ...

TITANIUM MACHINING HAS INCREASED SUBSTANTIALLY DURING THE PAST 25 YEARS BUT DESPITE INTENSE INTEREST IN FINDING IMPROVED TOOL MATERIALS,WC-6 WT. % CO IS STILL USED AT CUTTING SPEEDS LESS THAN 75 M/MIN ...

A NOVEL METHOD FOR STRENGTHENING CERAMICS AND ALLOWING STRENGTH RETENTION TO HIGH TEMPERATURE IS PROPOSED. THE PHASE I RESEARCH WILL DETERMINE THE FEASIBILITY OF INTRODUCING SUBSTANTIAL SURFACE COMPRE ...

ALUMINUM NITRIDE (A1N) IS AN IMPORTANT CANDIDATE MATERIAL FOR ADVANCED PACKAGING OF INTEGRATED CIRCUITS AS A HIGH THERMAL CONDUCTIVITY ALTERNATIVE TO BERYLLIUM OXIDE THAT COULD POTENTIALLY BE MADE AVA ...