You are here
Kalsi Engineering, Incorporated
UEI: W4ARDC4VHYL9
# of Employees: 30
HUBZone Owned: No
Socially and Economically Disadvantaged: No
Woman Owned: No
Award Charts
Award Listing
-
Project Title:Development of fast response flow control valve for gaseous hydrogen fueling of fuel cell vehicles Topic Number: C56-18C
Amount: $199,868.00Hydrogen fueling of medium- to heavy-duty fuel cell vehicles requires a transfer of 100 kg of hydrogen with targeted fueling time under 10 minutes. During the fueling process, the supply (inlet) press ...
SBIRPhase I2023Department of Energy -
Miniature passive thermal control valve for mixing or splitting single-phase fluid
Amount: $799,842.00NASArsquo;s Jet Propulsion Laboratory (JPL) developed mechanically pumped single-phase fluid loop (MPFL) thermal system for the Mars Science Laboratory (MSL) rover fluid loop that used mixing or split ...
SBIRPhase II2022National Aeronautics and Space Administration -
Miniature passive thermal control valve for mixing or splitting single-phase fluid
Amount: $131,452.00NASArsquo;s Jet Propulsion Laboratory (JPL) developed mechanically pumped single-phase fluid loop (MPFL) thermal system for the Mars Science Laboratory (MSL) rover fluid loop that used mixing or split ...
SBIRPhase I2021National Aeronautics and Space Administration -
Engineered Integral and Downstream Flow Conditioners
Amount: $2,041,036.00Kalsi Engineering designed prototype flow straighteners/conditioners (patent pending) using three distinct design approaches. The designs can be generally classified as standard pipe turns (e.g. elbow ...
SBIRPhase II2019Department of Defense Navy -
Advanced Sealed Bearing Assembly for Positive Displacement Motors used in Micro-borehole Drilling
Amount: $750,000.00The DOE has identified a need for a sealed bearing assembly (SBA) so that positive displacement motors (PDMs) for microhole oil drilling can be used at high differential pressures. Current off-the-sh ...
SBIRPhase II2006Department of Energy -
Advanced Sealed Bearing Asembly for Positive Discplacment Motors used in Micro-borehole Driling
Amount: $100,000.0078930S Advances in "microhole" technologies, which use portable drilling rigs with a smaller footprint and lower environmental impact, are needed to benefit the small driller. This project will deve ...
SBIRPhase I2005Department of Energy -
High Speed Bearing for Roller Cone Drill Bits Used in Hard Rock Drilling
Amount: $750,000.0040785 November 13, 1996 Kalsi Engineering, Inc. Reliable, long-life, high-speed bearings with high thrust are needed for roller cone bits used in hard rock d ...
SBIRPhase II1997Department of Energy -
High Speed Bearing for Roller Cone Drill Bits Used in Hard Rock Drilling
Amount: $75,000.00N/A
SBIRPhase I1996Department of Energy -
DEVELOPMENT OF A HIGHER PRESSURE ROTARY BLOWOUT PREVENTER FOR SAFE DIRECTIONAL DRILLING IN UNDERBALANCED APPLICATIONS
Amount: $75,000.00THIS PROJECT IS AIMED AT THE DEVELOPMENT OF A NEW GENERATION OF ROTARY BLOWOUT PREVENTERS CAPABLE OF SAFE, RELIABLE, AND COST EFFECTIVE HANDLING OF THE HIGH PRESSURES EXPECTED IN UNDERBALANCED HORIZON ...
SBIRPhase I1994Department of Energy -
Pressure Relief Valve for Cryogenic Gases with Modulating Pressure Control
Amount: $70,000.00This proposal is aimed at the development of a gas pressure relief valve with modulating pressure control that provides for low- or no-impact during venting of low temperature cryogens in the range of ...
SBIRPhase I1994National Aeronautics and Space Administration
