Engi-Mat Co.

Company Information
Address 2436 Over Dr Ste A
Lexington, KY, 40511-2637


DUNS: 806337762

# of Employees: 14

Ownership Information

HUBZone Owned: N

Socially and Economically Disadvantaged: N

Woman Owned: N

Award Charts

Award Listing

  1. Bi2212 Powder Production with Wide Tmax Window for High Field Magnet Applications

    Amount: $1,000,000.00

    The production of advanced magnets, which are capable of generating magnetic fields of 16 Tesla and higher, requires advances in superconducting conductors that can be produced in volume and that is c ...

    SBIRPhase II2019Department of Energy
  2. High thermal conductivity and specific heat nanocomposite epoxy technology for accelerator magnets

    Amount: $195,182.00

    The successful operation of superconducting magnets requires high-performance epoxy that is mechanically strong, electrically insulated, cryogenically compatible and chemically compatible with other s ...

    SBIRPhase I2019Department of Energy
  3. Electrionically Steered Antenna for Advanced RF Communications

    Amount: $125,000.00

    Future robotic and human space exploration vehicles will be producing large quantities of data that needs transmitted between vehicles and to the ground stations. However, these vehicles will be tigh ...

    SBIRPhase I2017National Aeronautics and Space Administration
  4. Manufacturing of High Permeability Materials by NanoSpray Combustion for RF Antennas

    Amount: $149,995.00

    RF signal collection and wireless communications across many different frequency regimes require conformal antennas operating over extremely broad frequency ranges (~2 MHz to ~3 GHz). Traditional elec ...

    SBIRPhase I2017Department of Defense Air Force
  5. A Novel Cleaning Technology for Spacecraft Habitat

    Amount: $125,000.00

    There is currently no space based laundry technology. Traditional laundry uses a large amount of surfactants, which results in a substantial organic contaminant burden on downstream wastewater proces ...

    SBIRPhase I2016National Aeronautics and Space Administration
  6. Manufacturing Scale-Up of High-Purity Optical Ceramics

    Amount: $1,499,969.00

    In this effort, nGimat will develop the capabilities to produce high-quality optical ceramic nanopowder for DoD applications such as laser and missile weapons and defense systems.Development of such c ...

    SBIRPhase II2016Department of Defense Air Force
  7. High Q, nCCVD Epitaxial-BST, Fast Varactor Filters

    Amount: $100,000.00

    Today, commercial and military wireless communications systems require high functionalities for microwave components and devices.Filters are critical components for radar, electronic warfare, and mode ...

    SBIRPhase I2016Department of Defense Army
  8. Ceramic-Metal Joining by a Novel Flame Processing

    Amount: $150,000.00

    Economical and efficient heat transfer technologies applicable to high-temperature, high-pressure conditions are a common requirement for advanced fossil energy and other thermal based power generatio ...

    SBIRPhase I2016Department of Energy
  9. Flame-Assisted Flash Sintering for Ceramic-Coated Heat Exchangers

    Amount: $1,493,073.00

    ABSTRACT:In this Phase II effort, nGimat will utilize its newly-developed FAFS technique to sinter ceramic films to metal substrates.The FAFS method was developed and proved feasible through a Phase I ...

    SBIRPhase II2015Department of Defense Air Force
  10. Late Award- Nanocomposite Coatings for Low-Cost Motor Windings in Electric Vehicles

    Amount: $999,975.00

    Electric vehicles, including hybrids in the nearer term, are the principal transportation technology by which the United States can become independent of foreign oil, can become energy independent ove ...

    SBIRPhase II2014Department of Energy
US Flag An Official Website of the United States Government