You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Efficiency Mid-Infrared Solid State Lasers

    SBC: AC MATERIALS, INC.            Topic: N/A

    AC Materials proposes development of a 4 micron Ho:BaY2F8 laser pumped by a Cr:LISAF laser in response to Air Force needs for an efficient pulsed source in the 3-5 micron region. Under the Phase I program lasing at 3.9 micron was demonstrated, with over 30mJ power per pulse. The Phase II effort will be optimization of this Ho laser. Crystal growth of Cr:LiSAF and Ho:BYF will be advanced to enable ...

    SBIR Phase I 2001 Department of DefenseAir Force
  2. High Efficiency Mid-Infrared Solid State Lasers

    SBC: AC MATERIALS, INC.            Topic: N/A

    AC Materials proposes development of a 4 micron Ho:BaY2F8 laser pumped by a Cr:LISAF laser in response to Air Force needs for an efficient pulsed source in the 3-5 micron region. Under the Phase I program lasing at 3.9 micron was demonstrated, with over 30mJ power per pulse. The Phase II effort will be optimization of this Ho laser. Crystal growth of Cr:LiSAF and Ho:BYF will be advanced to enable ...

    SBIR Phase II 2001 Department of DefenseAir Force
  3. HealthTrakT: Technology Enhanced Human Interface to the Computerized Patient Record

    SBC: ACUSOFT, INC.            Topic: N/A

    After Action Review is an essential part of both the training and actual combat environment. Sophisticated AAR Tools, such as PowerSTRIPES, have been developed for use in the modeling and simulation environment. These tools allow users to collect thedata, transform the data as useful information, and present this information in multi-media formats as objective evidence of performance. These too ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
  4. Advanced Technology for Real-Time Image Generation

    SBC: ACUSOFT, INC.            Topic: N/A

    In this SBIR, AcuSoft will research and develop advanced, real-time PC Image Generation technology, as well as develop tools and integrate the required capabilities using PC image generators. The resultant products will provide to the DOD M&S communitythe advanced real-time image generation technology that will enable the use of lower-cost PC graphics in military virtual simulation. In our PHASE ...

    SBIR Phase I 2001 Department of DefenseArmy
  5. Propulsion Improvements for Long Range Guns, Traveling Charge Concept

    SBC: Adept Systems, Inc.            Topic: N/A

    A network interface chip (NIC) that implements appropriateportions of the lower 2 layers of the ANSI 709.1 protocol(LonTalk) has been successfully designed and tested on aprogrammable logic device.This NIC has been successfullyinterfaced to a NetSilicon 32 bit ARM processor runningappropriate portions of the upper layers of the 709.1 protocol. Afeasibility demonstration was conducted successfully. ...

    SBIR Phase II 2001 Department of DefenseNavy
  6. Reconfiguration of Component Level Control Network Automation Systems

    SBC: Adept Systems, Inc.            Topic: N/A

    This project seeks to demonstrate the feasibility of applying advanced model based reasoning techniques based on the Open Autonomy Kernel (OAK) to a survivable component level automation infrastructure (CLAI) developed for Naval shipboard automationapplications. The key feature of the CLAI is cost effective scalable reliability through a dependable topology and dynamic reconfiguration for network ...

    STTR Phase I 2001 Department of DefenseNavy
  7. Superconducting Magnetic Energy Storage for Maglifter Launch Assist

    SBC: Advanced Magnet Lab, Inc.            Topic: N/A

    NASA is considering an electromagnetic catapult, the MagLifter to lowerthe cost of cargo delivery to space and improve launch reliability. Acarrier sled, levitated and propelled by magnets, provides an inintialvelocity to a space transportation vehicle. For Large payloads, therequired energy for this launch assist is in the range of 20 gigajoulewith peak-power requirements of several gigawatt.Usin ...

    STTR Phase I 2001 National Aeronautics and Space Administration
  8. Universal Superconducting Magnets for MagLifter Launch Assist Sleds

    SBC: Advanced Magnet Lab, Inc.            Topic: N/A

    NASA is considering an electromagnetic catapult, the MagLifter to lowerthe cost of cargo delivery to space. A carrier sled levitated and propelledby magnets provides the initial velocity to a space transportation vehicle.Superconducting magnets enable higher fields at lower weights than normalconducting magnets and consequently a significantly larger clearancebetween the guideway and the carrier s ...

    STTR Phase I 2001 National Aeronautics and Space Administration
  9. Universal Superconducting Magnets for MagLifter Launch Assist Sleds

    SBC: Advanced Magnet Lab, Inc.            Topic: N/A

    NASA is considering an electromagnetic catapult, the MagLifter to lowerthe cost of cargo delivery to space. A carrier sled levitated and propelledby magnets provides the initial velocity to a space transportation vehicle.Superconducting magnets enable higher fields at lower weights than normalconducting magnets and consequently a significantly larger clearancebetween the guideway and the carrier s ...

    STTR Phase II 2001 National Aeronautics and Space Administration
  10. Heavy Power Transmission for Positioning and Actuation

    SBC: ADVANCED TECHNOLOGIES GROUP, INC.            Topic: N/A

    During Phase I, Advanced Turbomachinery Solutions designed andtested a proof-of-concept, reverse rotation capable brush seal.All project objectives were met successfully. The new, hybridseal design can be retrofit into existing gas turbine designs,within the present geometric envelope, utilizing the same orimproved materials. The new seal design has improved leakage andwear characteristics over e ...

    SBIR Phase II 2001 Department of DefenseNavy
US Flag An Official Website of the United States Government