You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 7038 results
  1. Development of Cad Plating Replacement with Alkaline Zinc-Nickel Electroplating for Threaded Fasteners/Components

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC.            Topic: AF081101

    The DoD uses cadmium and chrome plating and removal processes on aircraft, engine, and landing gear components; however, these processes present significant health risks and cost. Cadmium, a carcinogen is targeted for removal from the workplace by the Environmental Protection Agency and is currently subject to regulation under the Clean Air Act, Clean Water Act and Resource Conservation and Recove ...

    SBIR Phase II 2019 Department of DefenseAir Force
  2. Catalytic N2O Decomposition for Piloted Scramjet Ignition

    SBC: REACTION SYSTEMS, INC.            Topic: AF083121

    Achieving hypersonic flight with air breathing vehicles using logistics fuels is a demanding task. A significant challenge in the development of single use and reusable systems alike is ignition of the scramjet engine at low Mach numbers. Unfortunately, current ignition systems do not provide reliable performance at low Mach number. Therefore, there is a strong need for a significant ignition capa ...

    SBIR Phase II 2019 Department of DefenseAir Force
  3. LASH- Binocular Multispectral Adaptive Imaging System (BMAIS)

    SBC: Sage Technologies, Ltd.            Topic: AF083015

    Low Altitude Sensing Helmet -(LASH) is to provide for pilot night vision when using small non-military planes to operate using unimproved landing areas around the globe. LASH will use SWIR (Short Wave IR) and LWIR (Long Wave IR) technology sensors to provide improved night vision in specified conditions.

    SBIR Phase II 2019 Department of DefenseAir Force
  4. Development of Cad Plating Replacement with Zinc Nickel on High Strength Steel Components

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC.            Topic: AF071320

    The purpose of this effort is to complete additional qualification/validation testing on Dipsol of America IZ-C17+ Low Hydrogen Embrittlement (LHE) Zinc-Nickel (ZnNi) and SIFCO 4018 brush plating for Intercontinental Ballistic Missile (ICBM) system components. Currently the USAF cadmium (Cd) plates thousands of steel components, some of which are high strength steel (HSS), to be used as a sacrific ...

    SBIR Phase II 2019 Department of DefenseAir Force
  5. Wing and Bomb Bay Launched (WBBL) Unmanned Air Vehicle (UAV)

    SBC: PIASECKI AIRCRAFT CORP            Topic: N05005

    Ibis’ baseline design balances the competing demands of low cost and high performance. The proposed baseline allows for the incorporation of high-rate production technologies which also provide the most functional shapes, minimizing cost and maximizing performance. Ibis’ layout features a streamlined fuselage, high aspect ratio swept wings and non-foldable tail-planes which sum up to ...

    SBIR Phase II 2019 Department of DefenseAir Force
  6. Multifunction Airborne RF Sensor (1000-437)

    SBC: SI2 TECHNOLOGIES, INC            Topic: AF03238

    SI2 Technologies, Inc. (SI2) proposes to mature and transition SI2’s multifunction sensor product. Specifically, SI2 will update the antenna and electronics designs to match the form factor and performance requirements, update the radio firmware to provide the required functionality, and manufacture and test the design within a flight-worthy pod for use with a small attritable aerial platfo ...

    SBIR Phase II 2019 Department of DefenseAir Force
  7. Fusion Engine for Atmospheric Data (FEAD) for the Joint Standard Instrumentation System (JSIS)

    SBC: SPECTRAL SCIENCES INC            Topic: MDA07017

    The purpose of the present effort is to provide a capability to the Joint Standard Instrumentation System (JSIS) for fusion of multiple sources of atmospheric characterization data into a single, unified, coherent description of the atmospheric state. JSIS is used to collect signature data, Time-Space-Position-Information (TSPI), acoustic data, and relevant metadata of threat missile and HF muniti ...

    SBIR Phase II 2019 Department of DefenseAir Force
  8. Low Power Distributed Data Network

    SBC: VULCAN WIRELESS, INC.            Topic: AF093088

    The objective of this research is to further develop the LPI/LPD low power wireless tag sensor system that implements wide area “denial of privacy” and a long range RF reader system. This technology addresses the quick reaction sensor network that provides Omni-access (global access). This system provides resilient radio frequency (RF) connectivity improving reliability of the communic ...

    SBIR Phase II 2019 Department of DefenseAir Force
  9. Testing Methodologies for Large Format Imaging Sensors

    SBC: Frontier Technology Inc.            Topic: AF093090

    AEDC needs a suite of testing approaches that will enable rapid, thorough calibration of large format imaging sensors (at least 4096x4096 pixels) with existing AEDC SSTF test equipment (scene projection and data acquisition). The methodology must extend to testing imaging sensors with field of view varying between one and 30 degrees without changes to optical hardware. The challenge is both to col ...

    SBIR Phase II 2019 Department of DefenseAir Force
  10. Innovative Micro-munition Electrical Interface Physical Interconnection Alternatives

    SBC: Wintec, Inc.            Topic: AF103135

    The objective of this Phase II STTP contract is to demonstrate an alternative agile acquisition approach by repurposing excess inventory legacy weapons for future mission applications. Through integration of inventory or new weapon subsystem components within the legacy weapon airframes without modifying the outer mold line (OML), new weapon employment capability may be identified and developed. A ...

    SBIR Phase II 2019 Department of DefenseAir Force
US Flag An Official Website of the United States Government