List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Efficient cFS-based On-board Lamberts Solution for DSMs

    SBC: Advanced Space LLC            Topic: T11

    Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. Launch Weather Decision Support System

    SBC: Radiometrics Corporation            Topic: T1

    NASA wants a cost-effective atmospheric remote sensing system providing accurate temperature and humidity profiles to least 10 km height in clear and cloudy conditions. Radiometrics Microwave Profiler (MP) products currently provide accurate temperature and humidity profiles in good agreement with radiosondes to 3 km height. Good agreement can be extended beyond 10 km height using variational retr ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  3. Redundant StarShade Truss Deployment Motor/Cable Assembly

    SBC: Tendeg LLC            Topic: S2

    The proposed innovations are as follows: 1) A fully redundant electrical and mechanical motor/cable deployment assembly 2) A redundant motor/cable deployment assembly that is integrated and deploys a perimeter truss for a starshade 3) A truss strut mechanism that allows petal and truss deployment and provides a stiff and repeatable support 4) A truss node light seal the suppressess all sun and sta ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  4. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: Space Lab Technologies, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat.  Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications.  The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cu ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  5. Helium and Hydrogen Mixed Gas Separator

    SBC: Skyhaven Systems, LLC            Topic: H10

    This product innovation is directed toward separating hydrogen from helium gas mixtures using a micro-channel separation unit with thin walls of a palladium-silver alloy. The micro-channels are produced in a size range of 100-200 microns such that the boundary layer thickness inside is drastically reduced when mixtures of helium and hydrogen gas flow through the channels. This thin boundary layer ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  6. Multimodal Agile Ranging and Velocimetry INstrument

    SBC: LAMBDA METRICS LLC            Topic: S4

    We propose to investigate two new sensing modalities comprising the Multimodal Agile Ranging and Velocimetry INstrument (MARVIN) using a novel acousto-optic Structured Light Imaging Module (SLIM) previously developed under the NASA PIDDP program for planetary rover navigation and geomorphology.Based on an acousto-optic illumination engine, SLIM consumes only 10-20W of power, weighs less than a kil ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. MarsOasis- An Efficient Autonomously Controlled Martian Crop Production System

    SBC: Space Lab Technologies, LLC            Topic: T7

    The MarsOasis™ cultivation system is a versatile, autonomous, environmentally controlled growth chamber for food provision on the Martian surface.  MarsOasis™ integrates a wealth of prior research and Mars growth chamber concepts into a complete system design and operational prototype.  MarsOasis™ includes several innovative features relative to the state of the art spa ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA.  The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA).  While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In t ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Validated Engineering Tools for Thin-Ply Composites

    SBC: Opterus Research and Development, Inc.            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associ ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Engineering and Qualification of Thin-Ply Composites

    SBC: ROCCOR, LLC            Topic: T12

    This body of research focuses on developing fundamental engineering qualification methods for Thin-Ply High Strain Composites (TP-HSCs). Roccor will collaborate with NASA and Dr. Kwok of the University of Central Florida to develop and validate a robust framework for engineering the viscoelastic behavior of highly strained thin-ply composites. The material systems studied will be highly focused on ...

    STTR Phase I 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government