List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery Corporation            Topic: DLA142001

    In Phase I, XABC scaled the capability to produce nanostructured LCO cathodes using an electroplating process.In this phase II proposal, XABC proposes to further demonstrate this unique manufacturing capability to produce full cell batteries with enhanced performance and reduced cost in DLA products, as a precursor to XABC becoming a domestic manufacturer of electrochemical cells.This Phase II pro ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  2. Nanomaterial-based Tamper-proof Anti-counterfeit Packaging Labels

    SBC: ADA Technologies, Inc.            Topic: DLA163003

    The risk of counterfeit parts insertion into the Department of Defense (DoD) supply chain can happen at multiple stages during the product/part/component/subcomponent manufacturing or distribution. Original component manufacturers typically reside in the lowest risk category whereas unverified sources/unidentified suppliers account for the maximum number of counterfeit issues. In addition, older l ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  3. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: Ocean Bay Information and Systems Management, LLC            Topic: DLA15C001

    Inspecting for and detecting counterfeit, unapproved material substitutions or substandard processed raw material using existing processes is difficult, time consuming and expensive.Ocean Bay, LLC and the Primary Investigator, Karen Bruer, formed a team consisting of Ocean Bay, LLC, Savanah River National Laboratory and Old Dominion University, to apply for DLA15C-001:Detecting Substandard, Noncon ...

    STTR Phase II 2017 Department of DefenseDefense Logistics Agency
  4. Aircraft Alternative Braking System for Reduced Cost of Sustainment

    SBC: American Maglev Technology of Florida, Inc.            Topic: DLA161002

    This proposal provides a detailed account of the Teams work through Phase 1 of the Magnetic Braking and Electric Taxiing SBIR as well as provides a pathway for building and testing a brake system in Phase 2. Having competed the effort of designing the magnetic braking and electric taxiing system in Phase 1, the Team is able to look back and take account the Program goals, accomplishments, and nece ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  5. Advanced Battery Manufacturing Technologies

    SBC: ADA Technologies, Inc.            Topic: DLA142001

    ADA Technologies, Inc. (ADA) in partnership with Laser Marks, a laser systems integrator, has designed, developed (Phase I) and will fabricate a low-cost, automated, high-speed/high-throughput Li-ion electrode cutter capable of producing high quality electrodes in an additive manufacturing environment. Utilizing the latest in laser technology and scanning systems coupled with innovative design and ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  6. Aircraft Alternative Braking System for Reduced Cost of Sustainment

    SBC: American Maglev Technology of Florida, Inc.            Topic: DLA161002

    Normal aircraft braking is achieved through a process of reverse thrust and a system of hydraulically activated brakes located on the main wheels of the aircraft. These friction based systems offer limited performance benefits including reduced braking capabilities due to brake fade, thermal loading issues, and generally higher operational, maintenance, repair and overhaul costs over the life cycl ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  7. Rare Earth Materials Recovery System

    SBC: PIONEER ASTRONAUTICS            Topic: DLA161003

    The Rare Earth Materials Recovery System (REMRS) recovers neodymium and related rare earth elements from permanent magnets of variable composition recycled from hard disk drives (HDD), motors, generators, and other industrial, military, and consumer products. The REMRS recovers rare earth oxides as high-quality feed stock to support manufacture of new high performance magnets. Fresh materials are ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  8. A New Process for Rare Earth Metals Recovery

    SBC: TDA Research, Inc.            Topic: DLA161003

    The recovery, separation and purification of rare earth elements are very difficult because they all have very similar properties.Solvent extraction is the most commonly used industrial separation method, but it is expensive due to the need for a large number of separation stages that are required.TDA Research Inc. (TDA) proposes to develop a new supported liquid membrane contactor that uses the e ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  9. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: Ocean Bay Information and Systems Management, LLC            Topic: DLA15C001

    "Micro-calorimetry is a Nondestructive Test (NDT) capable of detecting heat characteristics that could identify improperly processed, counterfeit, substandard, nonconforming or fake raw material prior to materials introduction into end-product production cycles. Current calorimetric technology is an extremely sensitive, expensive and time consuming process, utilizing an adiabatic or semi-adiabat ...

    STTR Phase I 2016 Department of DefenseDefense Logistics Agency
  10. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery            Topic: DLA142001

    Xerion Advanced Battery Corp (XABC) proposes Advanced Battery Manufacturing Techniques for High Performance, Low Cost Lithium Ion Batteries. XABC has developed a 3D battery electrode called StructurePore that allows for rapid ion and electron transport, enabling 5 minute charge times at 280Wh/kg on a positive + negative electrode basis. StructurePore batteries utilize a novel manufacturing metho ...

    SBIR Phase I 2014 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government